Tank washing - Import export

Quick and easy tightening system. Hydraulic lift for easy positioning of heavy cylinder heads.Heat insulated stainless steel. tank

Stand; It should be able to operate without any problem in the ambient temperature range of 0°C to +60°C. In addition, there lated machine should operate without any problems in heavy humidity and dusty working conditions. The machine works with PLC screen system. The installed DPF for cleaning is first subjected to a clogging test. According to the result, the cleaning process is started with different washing and pressure parameters. Before and afte rwashing, a report is received and delivered to the customer. The machine, which is designed for all kinds of DPFs, has all kinds of apparatus. A platform system that moves up and down to compress special filters is provided as standard on the machine. Special bag, cartridge filters, liquid level controls are provided as standard in the machine and it works completely digitally.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The valve grinder is breaking new ground in valve grinding. Instead of the traditional colletor chuck/lock assembly, the "DoubleV" working system gives very sharp and precise results and is extremely easy touse.The unique valve locking system is applicable to a wide variety of engines.

Washing Pistol / Gun for autopsy/ laboratory tables Washing gun with different water spray patterns to clean big surfaces, Laboratories, stainless steel furniture, tables etc. Widley used at the Autopsie, examination, pathology, veterinary medicine. •Flow volume is presettable •Spray pattern is in nitely adjustable from full to spray jet •Ergonomically formed soft-rubber handle with locking device for continuous spraying •Incl. cone for table or wall mount •Incl. water connection set with either ½“ or ¾”

Special for spinach.Machine comprised pre washing and washing tanks, pumps that allow for the creation of turbulent flows, some insect trap and propeller to make the leaves plunging in the turbulent bath. Recovery of the water in a settling tray at the outlet of the washer and filtering of the water with a wire rotating drum and its scraper in order to separate the waste. Circulation of water in a closed loop for low water consumption.

Washes most vegetables.Machine mainly made up of a washing tank, pumps that allow the creation of turbulent flows, a paddle turnstile to ensure the progression of floating vegetables and a lift belt. Recovery of water in a settling tank at the outlet of the washer and filtration of the water with a rotating wire drum and its scraper to separate the waste. Closed circuit water circulation for low water consumption. Depending on the products treated, a paddle turnstile can be replaced by an insect trap. As an option, a datura trap can be integrated into the washer.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank . chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electrostainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank . chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor, the washing effect is sprayed on 3 different planes, from bottom to top and from the side with increase.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electro stainless steel body in the alkaline structure at a concentration of 2-5 % in the device washing tank chemical water, each point of the dirty part is specially around contacted by nozzles. While the washing group used rotates around itself with a powerful motor,the washing effect is sprayed on 3 different planes, from bottom to topand from the side.

The washing process is done automatically in a completely insulated cabinet, without human touch. During this process, with a pump with an electro stainless steel body in the alkaline structure at a concentration of 2-5% in the device washing tank. chemical water, each point of the dirty partis specially around contacted by nozzles. While the washing group used rotates around itself with a power fulmotor, the washing effect is sprayed on 3 different planes, from bottom to to pand from the side.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the PEC – PEC VM (VM = metal tank) series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PEC – PEC MT solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

Acid descaling agent for CIP tank cleaning P35 Washing and cleaning products (including products containing solvents) Powerful, concentrated acid descaling detergent for cleaning of rust, mineral deposits and equipment in the livestock farming industry. Dirt to be removed includes mineral deposits such as milk and egg stones, as well as proteins, dried films and oxides. Does not generate foam. Allows routine treatment of all types of incrustations in circuits, pasteurisers, tanks, tanks, containers and utensils used on farms and in the agricultural and livestock industry. Particularly suitable for CIP applications. Wide range of applications in the food industry for cleaning stainless steel equipment with mineral or protein-derived incrustations, etc. Removes all inorganic dirt and part of the organic dirt due to its high wetting power.

Suitable for draining condensate or tank washing water. It can be mounted after the installation of the bench without creating encumbrances that can hinder movement. The siphon is equipped with a "fixing ring" for connecting it to the bench.

The machine is designed for quick, easy and effective cleaning of KLT crates and forms in the automotive industry. The device consists of the main washing zone followed by a rinsing zone and one blowing-off unit. The water from the washing and rinsing tanks are continuously filtered via two oil skimmers – one for each tank. Refreshing the water in the main tank with hot rinse water reduces the water and energy consumption. The filling of detergent in the washing tank is automatic via a dosing pump. Both main and rinsing tanks are equipped with filters for capturing the metal particles with size up to 100 μm. The machine is equipped with two 2.2 kW fans for vapour exhausting. The collected vapour from the fans passes through two condensers where it has been liquefied and returned into the main tank. There are four fans x 3 kW for removing residual rinsing water from the crates. The crates transportation speed is adjusted via a frequency controller.

Article 216 Wash – Professional portable washbasin for hairdressers made of durable scratch-resistant plastic material Height-adjustable chromed metal stand with 4-race modular base Basin with fixed inclination Accessories Hand shower – 2mt Waste pipe with support – 10l Tank – Carrying bag Versions and Colors The basin is available in Black 216 Wash – 4-race plastic base and non-slip feet 216 Wash Tsc – 4-race plastic base with non-slip feet and 2mt Waste pipe with support 216 Wash Tsc Dc – 4-race plastic base non-slip feet 2mt Waste pipe with support and Hand Shower 216 Wash Tsc Sb – 4-race plastic base non-slip feet Waste pipe and Tank 216 Wash Tsc Dc Sb – 4-race plastic base non-slip feet Waste pipe Hand Shower and Tank Bases It can be equipped with a 3-race plastic base / a modular 4-race plastic base / a 5-race plastic base Dimensions Basin 38 x 52 X 16 cm – Base 57 cm in diameter – Adjustable height from 76 to 111 cm

The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals. The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.

Shyira is the highest washing station in Rwanda. The temperate climate, high altitude and volcanic soil give the station a perfect microclimate for growing specialty coffee. As with all specialty coffee plantations, the harvesting phase is carried out only by hand. During this operation we try to make an initial qualitative selection of the coffee by removing the unripe or damaged cherries. Subsequently, the cherry undergoes an initial washing in tanks to remove any floating bodies, the aim is to make our coffee even cleaner. Once the parchment has been separated from the coffee bean, a final rinse is carried out. Once all the washing phases have been completed, the moment of drying arrives: first in an area dedicated to drying where a further quality control of the pulped beans is carried out. Once this check is completed, the beans are left to dry and turned regularly during the day.

TECHNICAL SPECIFICATIONS - Reference : 007067 - Cylindro-conical tank - Manhole - Washing ball - Total drain - Clear draught DIMENSIONS AND WEIGHT - Diameter: 1750 mm - Height: 5250 mm - Weight : 1250 kg

Colour TFT display - 4 adjustable cycles - wash and rinse temperatures displayed, drain pump, break tank and chemical pumps fitted as standard - chemical dosing adjusted from control panel - heavy-duty wash pump - superior peristaltic detergent and rinse aid auto-dosing units - optional thermostop - insulated cabinet and door - double skinned boiler - extra usable wash height - low volume wash tank - EasyClean triple filter system - anti-block removable wash and rinse arms - moulded wash tank to prevent debris build-up and assist routine maintenance - simple, intuitive controls - self-draining wash pump for improved hygiene. 3 baskets.

Standard accessories A1-8 Ø82mm spindle bore Quick change tool post(QCT-66) Automatic speed changer Tailstock Heat exchanger Optional accessories Enlarged 106mm spindle bore Spindle with speed of 2400rpm C axis Y axis Saddle with traction device Lengthened saddle Electric 4 way tool post Steady rest (20~200mm/150~300mm/30~150mm) Follow rest 20-200mm Manual 3-jaw / 4-jaw chuck Hydraulic 3-jaw/4-jaw chuck Rear 3-jaw chuck Front 3-jaw /4-jaw chuck Chip conveyor( 5 bar coolant tank/ wash down system/oil skimmer) 8-station VDI-40 turret 12-station VDI-30 turret 8 or 12 stations hydraulic turret, regular type 8 or 12 stations power turret Faceplate (20) 4-Jaw Independent Chuck Tool holder set Spindle sleeve Hydraulic collect chuck Spray gun Coolant through tool device Tool setter MPG handwheel Electronic Handwheel Tailstock side cover Tailstock connecting device Bar feeder Air conditioner

Selectable operation speeds - double-skinned stainless steel construction - removable anti-block lower, upper and lateral wash arms for the ultimate wash coverage - heavy-duty self-draining wash pumps for power and improved hygiene - economiser auto start/stop - EasyClean filter system - moulded wash tank with radial corners to prevent debris build-up and assist with routine maintenance - removable stainless-steel blade technology rinse arms for improved rinse power and coverage boiler and wash tank temperature displays - simple, intuitive controls - pressurised rinse system Insulated boilers - low water usage - double rinse zone - break tank panoramic, counterbalanced inspection doors for safe and easy maintenance access

Double-skinned construction - economiser auto-start/stop - Selectable operation speeds - easyClean filter system - removable anti-block wash and rinse arms - stainless steel ‘blade’ technology rinse arms for the ultimate rinse coverage - moulded washtank to prevent debris build-up and assist routine maintenance 460mm loading height - boiler and wash tank temperature displays - simple, intuitive controls - self-draining wash pump for improved hygiene- low-volume wash tank - insulated boiler - low water usage pressurised rinse system - break tank - supplied with 2 plate, 1 cup and cutlery basket

Selectable operation speeds - double-skinned construction - EasyClean filter system - removable anti-block wash and rinse arms - stainless-steel ‘blade’ technology rinse arms for the ultimate rinse coverage - moulded wash tank to prevent debris build-up and assist routine maintenance - boiler and wash tank temperature displays - simple, intuitive controls - self-draining wash pump for improve hygiene - insulated boiler - low water usage - pressurised rinse system - break tank

Heavy-duty wash pump - superior integral peristaltic detergent and rinse aid dosing units - EasyClean dual filters - removable anti-block wash and rinse arms - hydro-dynamic basket slides - moulded wash tank to prevent debris build-up and assist maintenance - optional thermostop for guaranteed rinse temperatures - extra loading height - counter-balanced door - self-draining wash pump for improved hygiene - low-volume wash tank - double-skinned and insulated - stainless-steel cabinet and door - insulated boiler - low water usage - simple, intuitive controls

Standard accessories Fanuc or Heidenhain CNC controller ISO40 for TC-2100 and ISO50 for TC-1850/3200/4200/5200 Z axis with AC servo motor &amp; built-in brake Spindle oil cooler CTS with high pressure pump for ISO40 spindle only (No CTS on ISO50 spindle) Direct drive motor on both ISO40 and ISO50 spindle 22KW wide-range spindle motor for ISO50 spindle 15KW Hollow shaft spindle motor for ISO40 spindle Chip conveyor &amp; bucket Full splash guard with separator for pendular working ATC guard for safety Load meter on controller panel Lamp of cycle finish and alarm Portable MPG Coolant tank &amp; chip pan Chip wash-down device Work light Installation spare parts Assembly &amp; operation tools CE declaration Optional accessories Heidenhain Linear scale for 3 axes Spindle motor with speed range switching controller Power transformer