Torque testing equipment - Import export

Rent professional measuring equipment: Find our range of powerful measuring equipment for hire here, such as sound level meters, torque testing equipment, spring testing systems or precision balances.

Workbench mounted Torque Transducer Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment. For best results with impulse tools we recommend the use of a Crane CheckStar rotary torque transducer with a suitable joint kit rather than a stationary transducer. Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production joint condition, the stationary transducers form an effective off line test for verification of assembly tool performance. Key Features: - Static accuracy ± 0.25% FSD (bi-directional) - Plug and Play with Crane display systems (UTA) - Combine with joint kits for workshop simulation of hard to soft joints - Built-in workbench mounting flange - Rugged and durable construction, aluminium housing, stainless steel shaft - Ingress protection rating IP40.

Rotary Transducer with Angle Measurement Option CheckStar sets the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. CheckStar transducers fit in-line between the assembly tool and the fastener, measuring the actual torques applied under production conditions. Whatever the vibration and shock loads experienced, CheckStar's patented contact system ensures contact is always maintained between the readout and the strain gauges. Inferior systems suffer from "brush bounce" that leads to unreliable torque readings. The low inertia design of CheckStar ensures accurate and repeatable measurement of high speed transients, such as the point of shut-off on continuous drive tools and the pulsing of impulse tools.

The most accurate digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.25% (indicated value) from 10% to 100% - Over capacity alert and tracking System 8 error proofs your error-proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. System 8 has an LED that flashes red to alert you to the problem. It doesn’t stop until you reset the unit. The display also tells you the unit has been stretched over capacity. System 8 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to “See Supervisor 120% Over Capacity”. No other torque tester on the market does this.

The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-QC series torque transducers are designed to work with System 8 Digital Torque Tester when used with ML 1000 and ML 2000 Mechanical Loaders. These transducers use Quick Connect baseplates that are a feature of the loader system. Features and Benefits: - Hex mounting flange style. - Can be mounted to ML 250 and ML 600 mechanical loaders. - All up to 250 lbf·ft capacity can be mounted to Quad Plate for multi-transducer mounting on the ML 250. - Smaller sizes (up to 300 lbf·in capacity) can be mounted to STMB or UMB brackets for use with a bench or table. - Larger sizes can be mounted on UMB L-bracket. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - Mechanical Loader ML - DTT System 8

The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-L Series Torque Transducers are designed to work with both System 4 / System 5 and System 8 Digital Torque Testers. These transducers incorporate an integral “L” bracket to facilitate horizontal or vertical mounting, such as for a bench or mobile (cart) application. Features and Benefits: - L-bracket has two (2) holes, 5/16” diameter, 3.25” on center on each leg of bracket. - Designed to be mounted to a bench or cart - very quickly. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - DTT System 8

The gateway to the finest in torque measurement tools! TT-Series Torque Transducers are designed to work with Sturtevant Richmont Digital Torque Testers or the like. Features: - Integrated SR mounting flange - Can be mounted to ML 250 Mechanical Loader. - Can be Mounted to Quad Plate for multiple mounting on ML 250. - Smaller sizes (up to 400 in.oz.) can be mounted to SSMB, STMB, or UMB brackets. - Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket. Related Products: - Mechanical Loader ML - DTT System 8 Optional Components: - 10293 = Detachable Signal Cable ca. 1,20 m * - 10153 = Single Mounting L-Bracket UMB (500 ft.lb and above) - 10154 = Triple Mounting L-Bracket STMB (up tp 400 in.oz) - 10601 = Switchbox 4-Way - 870776 = Square Adapter 1/4"f x 3/8"m - 870777 = Square Adapter 3/8"f x 1/2"m - 870778 = Square Adapter 1/2"f x 3/4"m - 870779 = Square Adapter 3/4"f x 1/1"m

The only digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.5% (indicated value) from 10% to 100% - Over capacity alert and tracking - Meets or exceeds ASME B107.300-2010. Torq-Tronics 2 error proofs your error proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. Torq-Tronics 2 has an LED that flashes red to alert you to the problem. It doesn't stop until you reset the unit. The display also tells you the unit has been stretched over capacity. Torq-Tronics 2 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to "See Supervisor 120% Over Capacity".

Essential for direct reading and high-capacity torque wrench calibration! Mechanical loaders increase the accuracy ot torque test results while simultaneously reducing technician fatigue from pulling or pushing on torque wrenches during testing. A mechanical loader is the perfect accessory to increase the repeatability and productivity of the System 5 Digital Torque Tester. The drive system for each loader assures true 90-degree force application to eliminate force angle error in testing. In addition, the loaders mechanical advantage reduces technician effort and fatigue, particularly in high-capacity tool testing. SR Mechanical Loaders use the highest quality ball screws to assure smooth operation and extended service life. Welded steel frames and rigid transducer mounting plates assure torque load is properly resisted. Optimized gearing selection reduces physical effort to operate, enhancing productivity and ergonomic safety.

The TSC Series is the Torque and Speed Conditioner used to connect Magtrol Eddy-Current (WB) or Powder (PB) Dynamometers to the DSP7000 Dynamometer Controller. Powered by the dynamometer controller, and based on a precision instrumentation amplifier, the unit amplifies and filters the torque signal. It also provides power and connections for the speed pickup sensor which is located in the dynamometer.

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Alpha Cabins (Determination of acoustic properties of materials) Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

- self-supporting bed, - no transfer of torque to the ground - rapid fixation of modules and additional equipment in any axial position without drilling Picture: The modules executing torque on each other consist of electric motors with a high torque transmission. They are secured by strong clamping elements on the test bed. Their axial position is adjustable. The removable protection grid protects only against accidental contact to rotating parts under laboratory conditions. Solid axially movable protection covers are avaiable if parts might detach and fly away.

Various test rigs: - Alternating bending test rig for seating furniture: seat/back rest load acc. to BIFMA X5.1, EN 581-2, EN 1335, EN 1728, BS 5459 - Double test rig for chair testing: seat and backrest tests, side-to-side tests and armrest tests according to EN 1335, EN 581-2, EN 1728, BIFMA X5.1, BIFMA X5.4, BIFMA X6.5, BS 5459 - Test rig for alternating bending tests of arm rests according to EN 1335, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459 - Portal drop test rig: testing of chairs, stools, tables, beds acc. to BIFMA X5.1, BIFMA X6.1, EN 581-2, EN747-2, EN 1728, EN 1730, ISO 7173, EN 12520, EN 14072 - Test bench for determining the stability of chairs in accordance with the standards EN 1022, EN 1729-2, EN 581-2, ISO 7174-2 and BIFMA X5.1 - Test rig for tilting drop tests at chairs according to DIN 68878/1 - Swivel test rig according to DIN 4551, EN1335, NEN 1812 and BIFMA X5.1

Ballistic Block Damping Bricks Ballistic Rubber Block Specially formulated with rubber supported by flame retardant chemicals. Due to the fact that rubber is produced by vulcanizing under high pressure and high temperature, the rubber is able to trap bullets much higher than its volume. The hardness of the produced blocks was adjusted to protect the projectile from splashing on the surface. Blocks on the side walls are produced in such a way that the projectiles do not bounce the bullet for interactive targets. It is designed to be used in Homeland Security, Military and Police Schools, Security and Special Protection Systems and in all shooting ranges.

The MP Computer is a comfortable, comprehensive and easy-to-handle evaluation, display and control unit for different types of engine test beds. Its clear and ergonomic arrangement fascilitates the work with the test bed. Desired loads can be adjusted quickly and easily. Specialists are not required. Many optional additional functions increase enlarge the comfort of the MP Computer. Maintaining permanent accuracy of torque measurement is facilitated by a semi-automatic calibration routine. Existing engine/motor test beds can be modernized by an MP Computer. Examples of optional additional functions: - Automatic gravimetric determination of the specific fuel consumption. - Several possibilities of output and documentation of measured values. - Acquisition of non-electric and electric measuring values on combustion engines, electric machines, etc. - Special functions required by certain measuring tasks.