Austria
Manufacturer/ Producer
Austria
PROVEN TECHNOLOGY WITH HIGH STANDARD OF EQUIPMENT AND FIRST-CLASS PRICE-PERFORMANCE RATIO ECOTRON® is available in the power classes 11 kW to 45 kW. The operating pressure of 4,000 bar is the perfect balance between long maintenance intervals and high cutting speed. ECOTRON® is our basic model with flow rates between 1.2 and 4.3 l per minute and an operating pressure of 4,000 bar. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.
Request for a quoteAustria
THE PROFESSIONAL PUMP WITH A HIGH VOLUME FLOW FOR MULTIPLE-HEAD APPLICATIONS. EVEN PRESSURE SIGNAL FOR HIGH PRODUCTIVITY. Proven 4,000 bar technology combined with high flow rates – greatly appreciated by the professionals. Especially for multiple-head applications, HYTRON® always ensures the required volume of high-pressure water. HYTRON® provides 6.0 or 7.6 l per minute with 4,000 bar. Whether you are using two or four abrasive cutting heads simultaneously, HYTRON® provides continuously adjustable pressure from ten to 4,000 bar. The two chamfered pressure intensifiers create an optimal cut. Customers buy European products because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality CONVENTIONAL WORKING PRINCIPLE WITH EVEN PRESSURE
Request for a quoteAustria
The complete testing pump unit is installed on a trolley with suspension device and thus designed for mobile use outside. It is available with different explosion protection versions. Operation takes place via cable remote control. Pre-selection of the maximum test pressure can be continuously adjusted to up to 5,500 bar. The pump is switched off automatically after the set pressure is reached. The flow rate can be continuously adjusted from 0 to 1 l per minute just like for the workstation pressure testing pump.
Request for a quoteAustria
The complete pump unit is installed on a base frame; it is operated with a central operating panel. Pre-selection of the maximum test pressure can be continuously adjusted to up to 5,500 bar. The pump is switched off automatically after the set pressure is reached. The flow rate can be continuously adjusted from 0 to 1 l per minute and thus enables a defined build-up of the required test pressure.
Request for a quoteAustria
INCREASE THE PRODUCTIVITY OF YOUR EXISTING WATERJET CUTTING SYSTEMS BY AT LEAST 30 % With HYPERTRON®, you can reach a 30 to 50 % higher cutting speed and energy efficiency combining servo technology with ultra-high pressure. The HYPERTRON® provides flow rates of 3.5 l per minute with 6,000 bar or 4.6 l per minute with 4,000 bar. Whether you want to work with two cutting heads or only with one cutting head, HYPERTRON® provides the right pressure – from 100 to 6,000 bar. Flexibility and high performance in one. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.
Request for a quoteAustria
AUTOFRETTAGE MAXIMUM PRESSURE PUMP The complete pump unit is installed on a base frame; it is operated with an operating panel that is connected with the pump via cable. Pre-selection of the maximum test pressure can be continuously adjusted to up to 12,000 bar. The pump is switched off automatically after the set pressure is reached. The flow rate can be continuously adjusted from 0 to 0.5 l per minute and thus enables a defined build-up of the required autofrettage pressure.
Request for a quoteAustria
These test stations are designed for pressure testing of valves with an operating pressure of up to 5,500 bar. Gas compressors and pressure reservoir for testing with nitrogen as well as hydraulic stations for connecting and switching valve drives are available. The complete high-pressure valve test station is controlled with a central control panel. Mobile or fixed pressure testing pump can be used to generate pressures of up to 5,500 bar.
Request for a quoteAustria
THE NEXT STEP IN PUMP TECHNOLOGY EVOLUTION: ENERGY-SAVING, HIGHLY EFFICIENT AND PROFESSIONAL. SERVOTRON® is available in the power classes 37 kW and 45 kW. Its operating pressure of 4,000 bar has been considered to be the optimum in the professional waterjet cutting sector for years. The Austrian technical control board has confirmed that up to 24% energy can be saved with SERVOTRON® in a comparison with conventional pumps. It is available with a flow rate of 3.8 l per minute and 4.6 l per minute. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.
Request for a quoteAustria
Peroxide dosing pumps are specially designed for the injection of peroxide in polyethylene reactors (LDPE). High-quality components and materials guarantee highest operating safety. All electrical and electronic components are suitable for use in explosion-prone zones. High dosing accuracy and nearly pulsation-free delivery of the proximity switches with operating pressures of up to 3,500 bar distinguish these high pressure pumps. Flow rates of 18 l per hour (0.3 l per minute) to 150 l per hour (2.5 l per minute) are part of the standard range.
Request for a quoteGermany
Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency
Request for a quoteGermany
ViscoTec Dispenser 3VMP22 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming mode of operation
Request for a quoteGermany
ViscoTec Dispenser 3VMP18 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation
Request for a quoteGermany
The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate
Request for a quoteCreate one request and get multiple quotes form verified suppliers.