The knurled shaft of the blind rivet nut provides a locking device to avoid the turning of the insert in the component. These knurled blind rivet nuts are used preferably in components with lower regidity (component material is less "hard" than the material of the blind rivet nut).They are available with different heads (dome, countersunk and small countersunk) and as open and closed end versions.
Germany
One blind rivet nut for all grip ranges. The innovative and patented development of the Honsel-Group was in 2007 the first mass-production multigrip blind rivet nut. The product has a lot of advantages over the common standard types like no mixing of different grip ranges, reduction of storrage and failure costs or the reduction of item diversity.
Request for a quoteGermany
The HONSEL COIL "cone" can be installed in the same way as a coil with tab. No additional or special tools are required for process-reliable installation. When the HONSEL COIL "cone" is screwed onto the installation spindle, the conical portion of the wire thread insert creates a clamping effect between the installation tool and the coil. This ensures a stable installation process into the work piece. Advantages: — tab-free and therefore optimally designed for e-mobility due to no risk of tab debris. — Shallower blind hole depths can be realized — Subsequent processes are no longer necessary (breaking and removing of the installation tab) — No thread skipping during installation — Cycle time reduction of 20-30 % per installation — No special tools required for the installation process — The installation process improves due to the conical portion
Request for a quoteGermany
The HONSEL RIVET NUT "headless" can be used in existing and new applications. The blind rivet nut can be flush mounted in smooth bores without countersinking. The omission of the "countersink" process of the hole realizes enormous potential for savings. Due to the 0 mm protrusion, components can be mounted without interfering edges or slide over one another without obstruction. Advantages: — Flush mount in smooth bores — No countersink required — Protrusion 0 mm — No interfering edges — High-quality corrosion protection (zinc-nickel) with 720 h salt spray test resistance
Request for a quoteGermany
Reliable with low wear. On the HONSEL BZ 143A, the clamping jaws are specially adapted to the trapezoidal grooves of the rivet mandrel. In combination with the modified clamping mechanism, this guarantees secure and positive setting of FERO® BULB high-strength blind rivets (or comparable types) with mandrel diameters from 3.8 to 6.15/6.5 mm! Wear of the clamping jaws is minimised!
Request for a quote