CHRIST CARWASH CATALUÑA

Parts are cleaned, rust removed, rinsed, phosphatized and dryed in conveyor bent tunnel w ashing machines, all these applications are nonmanuel. When the parts are moved into the machine, they exposed all these operations and moved out. These conveyor bants are 304 or 316 quality stanless steel components. Speed of the conveyor is controlled digitally. Circulation pumps are very good degisned parts. Heating system can be optianlly electric, cell cored or burneroperated. Isolation is very sensitively handled for the energy saving. PLC containing systems can be controlled from operation panel. Our all machines contain automatic water feeding and liquid level control systems.

D7 is a tunnel car washing machine with 7 washing brushes, which is the economic version of D9. This tunnel type of equipment can wash cars quickly and continuously, and it can wash 50-60 cars per hour. Its production greatly meets the needs of customers with large business sites and a large amount of car washing. Now many customers with a daily car washing volume of more than 500 cars are using this equipment. This tunnel type of equipment is sturdy and durable. Its appearance takes into account the likes of domestic and foreign customers. It covers a relatively small area, has strong adaptability to the site, and has excellent performance. It is favored by some customers who are limited by the site and want to install tunnel machines.

The machine is designed for cleaning, degreasing, chemical treatment of the outer layer and blowing of small components. The parts are arranged in trays with dimensions 600x400x70-150 mm. Two washing zones – pre-washing zone and zone for main washing. After each washing zone there is zone for blowing. The pre-washing zone has an external band filter, which is with the possibility of processing a high volume of washing solution and captures particles of a size greater than 350 μm. The band filter cleaning the washing solution of oil and hard dirt. The mainly washing zone has a column bag filter, which captures particles of a size greater than 50 μm. Both filters have monitoring systems for the degree of soiling and in case of clogging the machine stops. Automatic dosing of the cleaning agent. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations.

The machine is designed for quick, easy and effective cleaning of KLT crates and forms in the automotive industry. The device consists of the main washing zone followed by a rinsing zone and one blowing-off unit. The water from the washing and rinsing tanks are continuously filtered via two oil skimmers – one for each tank. Refreshing the water in the main tank with hot rinse water reduces the water and energy consumption. The filling of detergent in the washing tank is automatic via a dosing pump. Both main and rinsing tanks are equipped with filters for capturing the metal particles with size up to 100 μm. The machine is equipped with two 2.2 kW fans for vapour exhausting. The collected vapour from the fans passes through two condensers where it has been liquefied and returned into the main tank. There are four fans x 3 kW for removing residual rinsing water from the crates. The crates transportation speed is adjusted via a frequency controller.