Switzerland
Manufacturer/ Producer
Switzerland
Multimode fibers are increasingly being used to transmit high power and connectors are incorporating a modular design to help eliminate the need for a splice. Diamond has developed the E-2000™ PSm and DMI PSm products utilizing our Optical interface PSm technology for use with these fibers and applications. Our Power Solution products are designed to work with all optical fiber destined for higher power applications. For multimode fibers in particular, our PSm technology has been developed to guarantee high power transmission targeting mainly, but not limited to, pump lasers integration. BENEFITS: Resistant to high power, Low Insertion loss due to our Active Core Alignment (A.C.A) process, Easy thermal management
Request for a quoteSwitzerland
Diamond offers High Temperature (HT) fiber optic metal assemblies developed specially to withstand operating temperatures beyond the range of conventional plastic connectors over extended periods. The HT assemblies rely upon a combination of specialized assembly techniques and materials, together with special fibers with appropriate coatings suitable for deployment in harsh environments. Diamond HT solutions’ benefits extend to temperature applications up to 150° C (302°F) for use in severe conditions within industrial, military, aerospace, off-shore, telecom, and other environments. These add up on top of traditional advantages such as immunity to electromagnetic interference, better environmental stability and enhanced remote sensing compared to traditional electronic sensors. Diamond HT standard assemblies are available in PC and APC version with standard MM or SM fibers. Other configurations are available upon request.
Request for a quoteSwitzerland
Diamond has developed the new rugged, reliable, IP 67, push-pull actuating HE-2000™ harsh environment connector with superior optical and mechanical performance for demanding applications. Built around the innovative Diamond Multipurpose insert, the HE-2000™ connector incorporates four termini using Diamond's two-component ferrules, assembled with the company's Active Core Alignment process for unparalleled fiber core concentricity. Also available are electrical contacts for hybrid E/O applications. The optical and electrical termini are protected from dust and water with the unique automatic protection shutter on the plug connector and a manual shutter on the bulkhead receptacle. The HE-2000™ connector is available for MM, SM (PC/APC) and small-core single mode fiber, polarization-maintaining fiber, and other specialty fiber types. Furthermore, Diamond splice-on termini can be field terminated with the Diamond ZEUS D50 HE fusion splicer, allowing in-service repairs and installations
Request for a quoteSwitzerland
Diamond has developed an advanced COTS MIL-38999 style connector that demonstrates exceptional performance in demanding optical applications. For the first time, rugged 38999 connectors are available for use with small-core single mode fiber, polarization-maintaining (PM) fiber, and other specialty fiber types. Built around the innovative Diamond Multipurpose (DM) insert, the connector incorporates four (4) termini with Diamond's two-component ferrules, assembled with the company's Active Core Alignment (ACA) process for unparalleled core concentricity. Also available are electrical contacts for hybrid E/O applications. Furthermore, Diamond splice-on termini for repairs can be field terminated with the Diamond ZEUS D50 HE fusion splicer.
Request for a quoteSwitzerland
Diamond has developed the new rugged, MIL-83526 DM connector featuring the DM (Diamond Multipurpose) insert for superior optical performance. This connector is extremely well suited for harsh environments and other demanding applications. The MIL-83526 DM (Diamond Multipurpose) connector incorporates four (4) termini utilizing Diamond's two-component ferrules, assembled with the company's Active Core Alignment (ACA) process for unparalleled fiber core concentricity. This connector is also available with electrical contacts for hybrid E/O applications. The MIL-83526 DM connector is available for MM, SM (PC/APC) and smallcore single mode fiber, polarization-maintaining (PM) fiber, and other specialty fiber types. Furthermore, Diamond‘s splice-on termini can be field terminated with the Diamond ZEUS D50 HE fusion splicer, allowing for in-service repairs and custom installation.
Request for a quoteSwitzerland
The DiaLink connector (patent pending) with its intelligent circular design is setting new standards in fiber-optic cable connections. Its numerous positive characteristics ensure that there are almost no limits to the way in which it can be used – whether its in medical applications, measurement technology or FTTH cabling. The connector allows for simple adaption to a wide range of applications. This is also reflected in our wide range of possible connector configurations. The DiaLink comprises a male and a female connector side. Thanks to the user-friendly design and the push-pull system, the connector can also be used in extremely confined conditions as a device interface or with a high packing density without any problems whatsoever.
Request for a quoteSwitzerland
The field of application of PM elements has expanded beyond traditional markets to brand new ones, from research to industrial environments: Biomedicine, Spectroscopy, Metrology, Sensorics, Telecommunications, Laser technology, Surveillance & Security, Lithography. DIAMOND supplies high-quality solutions to polarization maintaining (PM) and polarizing (PZ) fiber optical interfaces for optimal control of the signal’s polarization state. Two production process are available in two product lines. Our broad PM standard products achieve a low Insertion Losses (IL) combined with high polarization extinction ratios (PER) and higher return losses (RL) thanks to our independent process of Active Core Alignment and Active Orientation. The multichannel connectors based on our DM technology insert (HE-2000, MIL-38999 DM, MIL-83526 DM) are fully compatible with the PM standard termination. The PM+ product line is available on homologated connectors, fibers and cables, and provide the same low IL
Request for a quoteSwitzerland
The special feature of the new DiaFlex fan-out connection is that the fiber whips can be removed and replaced via a connector system in the divider. This provides greater flexibility in the installation of fiber-optic networks. Cable ends can be replaced flexibly, quickly and without spending a great deal of time or money, and cable installations can be extended as is necessary. Thanks to the feed-in cap, which has a small design, preassembled cables can be inserted directly into pipes or cable ducts. There is therefore no need for expensive splices. The cable and the fiber whips are manufactured in the fiber design and quantity that you requested, inspected and delivered with the corresponding test reports. The DiaFlex contains a DIAMOND multi-fiber connector (MFS) for 12 fibers (24 upon request). - Replaceable fiber whips - Protective cap with feed-in eye - Simple to use on site and no expensive splicing work necessary - Robust metal fiber divider
Request for a quoteSwitzerland
Based on the known Diamond ZEUS D50 Fusion splicer, which provides fast, easy, and high performance field terminations of Splice-On Connectors (SOC), we have developed a new Kit with the aim of simplifying the field repair or termination of outdoor connectors. The Kit contains everything that is needed to prepare, handle and splice tough outdoor/military and industrial cables with an outer diameter of 3 mm to 8 mm, including a cleaver and an automated stripping machine with heated jaws. Once the cable is fixed on a sliding holder, all three operations can be carried out without additional cable manipulation.
Request for a quoteSwitzerland
The DIAMOND Network Acceptance (DNA) Kit is an FBG-based (Fiber Bragg Grating), easy-to-use testing system for fiber-optic P2P networks. The system provides the capability of a clear Optical Line Identification (OLiD), thanks to the integration of FBGs within connectivity components. This allows the line integrity and link correctness to be checked from a single access point. OLiD is a technically valuable and efficient alternative to the time-and resource-consuming red-light examination method. The system does not interfere with the standard telecom P2P operating bandwidth, therefore it can also be used on lines that are already active.
Request for a quoteUnited Kingdom
Diamond turning is an Aspherics best friend! Knight Optical can offer custom made Diamond turned aspheric lenses for use in missile guidance systems, night vision/thermal Imaging cameras and other military based and commercial infrared systems. We supply a range of diamond turned germanium aspherics for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. The benefit of Diamond Turned Aspherics, are that lens shapes can be manufactured very accurately without an expensive tooling cost except for the diamond bit; and is cost efficient for small quantities. Which are ideal for use within the Defence and Aerospace Industry. Knight Optical offers diamond turned aspherics from a range Read PDF for full specification…
Request for a quoteUnited Kingdom
As well as Knight Optical’s Low GDD Ultrafast Laser Mirrors, we can also provide broadband and wide-angle alternatives to cover more of a range of applications. Our Wide-Angle Laser Mirrors optimised for the fundamental and second harmonic (SHG) emissions of Ytterbium (Yb) doped lasers including diode-pumped solid-state (DPSS) and fiber lasers, and therefore have a design wavelength of either 515nm or 1030nm. They exhibit > 99.9% reflection when used between 0 to 45°. The Broadband Laser Mirrors work from 700-900nm ideal for applications using a Ti:Sapphire laser, again demonstrating > 99.9% reflection within this wavelength range. Their key features include: •Ion beam sputtered (IBS) coating which is compact and durable. •Reflection > 99.9% within their design wavelength range. •Broadband laser mirrors work at 45° •Exhibit minimal group delay dispersion (GDD) to prevent pulse broadening •High laser induced damage threshold (LIDT) •Precision flatness and surface quality to
Request for a quoteUnited Kingdom
This month, Knight Optical is excited to unveil a brand-new range of Fluorescence Filter Sets. As its first product launch of the year, the announcement comes as welcome news to those working on fluorescence imaging applications, who demand premium-quality, ultra-precision Filter Sets for high-efficiency transmission. The launch follows the business’ 30th anniversary, which the global optics supplier celebrated last year, and demonstrates its dedication in continually evolving the growth of its already-comprehensive portfolio of cutting-edge, custom-made, and stock optical components. Here, the trusted brand discusses its new product offering and runs through the indispensable technicalities behind the sets.Filters and Sets to Meet Every Application’s Needs As a set of optics that are typically used for fluorescence applications within fields such as biology, materials science, chemistry, medical diagnostics, and mineralogy; for example,
Request for a quoteUnited Kingdom
Knight Optical can offer Gas Cells for use within the Chemical Analysis. We supply a range of Gas Cells for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within the chemical analysis industry. Gas cells are used in spectroscopy for identification of the contents of gases. The path length and window material are chosen for analysis of different concentrations and types of gas. Depending on the types of gases being analysed, the windows in a gas cell can be made from NaCl, KBr, CaF2, BaF2, or ZnSe and will be chosen depending on bandwidth, to meet the customer’s application. All our Gas Cells are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory
Request for a quoteCreate one request and get multiple quotes form verified suppliers.