EYLÜL OLUKLU MUKAVVA VE AMBALAJ SAN.TIC.LTD.ŞTI.

It begins with the use of corrugated cardboard in the use of paperwork formed in the 19th century, but its current use is by Albert Jones in New York, Jones; corrugated boards in the form of a cylinder of protection of lamp glasses for the first time. The first machine, on the other hand, was shaped by G. Smith in 1874, where he would produce high-dimensional corrugated corrugated cardboard, and the first machine to be created by Uzun in the same year was produced in parallel with the production in 1874.

Snap-bottom box is one of the molded box types, so it is generally considered as consumer packaging because of the bottom and top covers that lock when the box is closed in a certain order without the need for tape. The addition is usually made by the company that produces the box by sticking method. Since this type of box is a multi-purpose box, it can be produced in different widths and lengths. The box is also produced as printed.

The parcels we refer to as textile parcels are generally produced with corrugated cardboard, which we refer to as double wave. Considering the load to be carried by the parcel, Single wave parcels are not preferred since the load to be carried by our parcel will be heavy. Since the load to be carried by the parcel is heavy, the parcel type we call Dopel. should be preferred. Double wave boxes (Dopel Boxes) are divided into two, one of them is Micro Dopel, which we call B+E wave, and the other is Standard Dopel type boxes, which we call B+C wave. Although the Micro Dopel boxes seem a bit thinner than the Standard Dopel boxes in terms of thickness, there is no difference in terms of strength, the only difference is that Micro Dopel boxes seem a little thinner than Standard Dopel Boxes, in fact, there is no difference in terms of strength, both types of boxes It consists of 5 sheets of paper laminated to each other.

In order to integrate the standard box, to keep the box lids between the inner lids, to measure the space between the box lids if better storage is suitable in general lids, a suitable piece to be measured into the gap between the box lids is a suitable selection box lids, preferred in this preferred area and a large It is a product that appeals to the industry, for different cuts in sets used in boxes, boxes, packages, but it is also frequently, printed and widely used for industries.

The difference of the double-sided overlapping box from the standard box is that the outer covers are overlapped by keeping all the cover lengths away from the determined dimensions. This solution, which is another way of making the space between the top covers economical in terms of production and use, is generally used for packaging heavy products, otherwise the bottom is parallel to the ground. Since it will not arrive, it causes problems in the stack. The covers of this type of boxes are usually closed with wire stitches.

Printed boxes are specially made up to 3 colors according to the requests of the companies, since they are produced with flexo printing, they are produced with water-based inks. Our customers usually cannot distinguish between Flexo printing technique and Offset printing technique, Flexo printing technique is produced with water-based inks as we mentioned above, and printing is carried out with the help of Rubber Churches or Cyrel Churches at the printing stage, whereas this system is different in offset printing, in offset printing works. Printing inks are used as ink type. Offset printed boxes and parcels are printed with film, not through the Church. For example, it is possible to obtain a one-to-one photo printing of your product optionally in Offset Printed Parcels and Boxes.

The only difference of the box with a separator from the standard box is that there are partitions that protect the material to be put inside against breakage and impacts. The cover lengths of this box are the same as the standard box, the outer covers meet in the middle of the box, the distance between the inner covers varies depending on the box length - middle of the box, they are the packaging of many products, they are generally used for packaging or transporting glass or products that are more susceptible to breakage.

Full cover box is a box type used as the outer covers of the boxes are fully overlapped, this type of boxes are more resistant to collapse, boxes with the narrowest dimensions and stacked on their side faces are resistant to stacking due to the cardboard layer formed at the beginning.

The cut piece cardboard, which is put into the boxes for the purpose of dividing the box, is called intermediate cardboard, or in other words, it is called Separator Cardboard. Intermediate cardboard is used for most works, for example, it is placed behind tables, mirrors and frames for support, or in the textile industry for the wrapping of tablecloths and similar goods of certain lengths, or it is placed on the bottom and top of the boxes to eliminate the difference in the level of the covers. But generally, end users also use the intermediate cardboard as a separator, such as a separator, sometimes after a kind of goods is placed up to half or a certain part of a box, an intermediate cardboard is placed on those goods and a different product is filled on the intermediate cardboard, or sometimes the intermediate cardboard is filled. The cardboard is placed vertically on the parcel as a divider.

The narrow-cut box is also called a one-piece telescopic box. This box, which is usually closed in automatic filling machines, is multi-purpose, so it can be closed by hand. It is used in many sectors from durable consumer goods to meat products. It is also a product preferred by pizzerias recently. Since it is suitable for stacking on top, it is resistant to stacking and can also be produced as printed.