FLEXOMAT GMBH

Germany

Factory icon Manufacturer/ Producer

FLEXOMAT GMBH
Web icon

Germany

Verified by Europages

Axial expansion joints compensate assembly tolerances and thermal longitudinal expansion in the direction of the tube axis. Depending on the design, they can be impinged with pressure internally and externally. Using a guide sleeve protects the metal bellows from abrasive media or flow-induced oscillations. The reaction forces caused by the internal pressure must be absorbed by sufficiently dimensioned anchor points.

Request for a quote

Germany

Verified by Europages

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

Request for a quote

Germany

Verified by Europages

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

Request for a quote

Germany

Verified by Europages

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

Request for a quote

Flexomat GmbH is a renowned manufacturer of compensators, metal bellows and metal hoses. Since 1975, its founders have been involved in all implementation phases of these products. Calculations for metal bellows and compensators are carried out according to recognised technical standards and methods and designed using CAD. Product manufacture is organised using a PPS system and carried out using cutting, forming and welding machines. Flexomat has been verified and recognised as a manufacturer in accordance with AD-2000 Merkblatt HPO, TRD 201 and DIN EN ISO 3834-2 and certified by TÜV SÜD as well as GL and the DVGW. Flexomat also operates a quality management system in accordance with ISO 9001: 2015.

Documents

Domain icon Manufacturer/ Producer

FLEXOMAT GMBH

Lindigtstrasse 2

01683 Nossen - Germany

VAT No.
Contact

Company info

Key figures

  • Company headcount
    11 – 50

Organisation

  • Year established
    1999
  • Main activity
    Manufacturer/ Producer

Activities of FLEXOMAT GMBH

  • Compensators
  • Finished Metal Products
  • Industrial piping
  • Inner tubes
  • Flexible tubes - non-ferrous metal
  • Chemical tubing
  • industrial hoses
  • High-pressure compensators
  • Metal bellows
  • Axial compensators