FORTEZA - Manufacturer of security alarm systems for perimeter protection of different objects

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects.

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. THE MICRO WIRE HAS A SMALL DIAMETER AND A MASKING COLOR. That’s why it is barely visible for an intruder and doesn’t provoke any efforts for a human during its breakage. The sensor MOSKIT is supplied from a built-in battery. SMALL DIMENSIONS AND WEIGHT.

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. MOSKIT-KIT is intended for the sensor transportation on a waist belt in the compact bag and has two spare cartridges. MOSKIT-KIT includes: - compact bag with the fixations on a waist belt - 1 pc. - sensor MOSKIT - 1 pc. - spare cartridges in the protective pocket - 2 pc.

The searchlights LED-40/10 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector.

The searchlights LED-75/60 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector.

FORTEZA-PERIMETER SOFTWARE is intended to control and manage TM Forteza sensors having RS-485 and other devices with NC connected via FORTEZA-ADAPTER (ТМ FORTEZA). FORTEZA-PERIMETER has an intuitive interface and doesn`t require special knowledges to work with it. Features of FORTEZA-PERIMETER Graphic representation of devices on the map. Automatic search for connected devices. Control of connected sensors and the colour indication of their status: alarm, norm and failure. Display of alarms number in the operation window for each device. Alarm reset for each sensor. Enable/Disable alarm sound. Indication of the subzone where an alarm occurred (for FM and MIR-M series). Connection of additional sound and light alarms via FORTEZA-CONTROLLER. Recording and storing of an event log, searching for events by a given filter and printing the protocol. LED security lightning brightness control. Possibility to change the logical number of devices.