Indonesia
Manufacturer/ Producer
Indonesia
Phased array up to 16/128 with 1x conventional UT channel Multiple probe capability with splitter (2x PA+ 2x TOFD) Unlimited groups Up to 256 focal laws Maximum PRF of 12kHz Available with ZPAC or IPEX connector
Request for a quoteIndonesia
The S1 TITAN series is available in four (4) configurations: models 800, 600, 500 and 200. All models use Bruker’s SharpBeamTM technology. The S1 TITAN 800 and 600 use a FAST SDD® detector to give you incredibly fast analysis times. The S1 TITAN 500 is configured with a fast, accurate, and affordable standard SDD detector. The S1 TITAN 200 is configured with an economical Si-PIN detector. In addition, the S1 TITAN can be configured with calibrations that are optimized for a variety of sample materials- including a wide range of alloys, various mining & environmental samples, as well as restricted materials.
Request for a quoteIndonesia
Every element in the periodic table, in seconds, in a handheld. One analyzer, every element The Z-903 accomplishes what no other portable analyzer has done. It’s a handheld analyzer that measures every element in the periodic table of the elements – from H to U.
Request for a quoteIndonesia
Lyft — a reinvented, high-performance PEC solution. The system features a portable, state-of-the-art instrument, real-time C-scan imaging, fast data acquisition (up to 15 readings per second) with grid-mapping and dynamic scanning modes, and flexibility with long cables (35 m / 115 ft). It can also scan through thick metal (up to 64 mm / 2.5 in) and insulation (up to 203 mm / 8 in liftoff), as well as aluminum, stainless steel, and galvanized steel weather jackets. The Lyft software is packed with automation and advanced algorithms that remove operator-specific dependence, thanks to the power of the SmartPULSE™ technology. It automatically optimizes pulser and receiver parameters (gain, duration, time gates, filters, etc.). SmartPULSE also optimizes wall thickness (WT) measurements, which ensures optimum performance and repeatability, while limiting the need for advanced knowledge of pulsed eddy current.
Request for a quoteIndonesia
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis. The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
Request for a quoteIndonesia
Olympus Omniscan SX 16:64 Phased Array Flaw Detector PA PR 1664PR With Probes In good working and cosmetic condition. Tested and works. Ready for work Complete kit. Includes probes D790-RL, LCLD-316-5G & V201 5/25″ Recently used in a working environment. Includes everything pictured. See pictures Olympus is proud to introduce the OmniScan® SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.
Request for a quoteManufacturer/ Producer
Jl. Budi Utomo No. 142 Jakarta Pusat
17662 Dki Jakarta, Indonesia - Indonesia
Portugal
The experience and Know-How acquired over the years, allows us to provide differentiated solutions in terms of Planning, Construction and Engineering. In each project, our clients can count on our professionalism, technical assistance and quality.
Request for a quoteGermany
Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.
Request for a quoteGermany
HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.
Request for a quoteGermany
To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.