Other information
Installation video: Instructions for the opening and closing of the E-Tubes
Series R117
Inner height hi: 21 mm
Inner widths Bi: 20 - 100 mm
bending radii R: 63 - 180 mm
Pitch: 30,5 mm
E-Tube, snap-open along the inner radius on both sides
Series R118
Inner height hi: 21 mm
Inner widths Bi: 20 - 100 mm
bending radii R: 63 - 180 mm
Pitch: 30,5 mm
E-Tube, snap-open along the outer radius on both sides
Series R157
Inner height hi: 40 mm
Inner widths Bi: 40 - 200 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
E-Tube, snap-open along the inner radius on both sides
Series R158
Inner height hi: 40 mm
Inner widths Bi: 40 - 200 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
E-Tube, snap-open along the outer radius on both sides
Series R167
Inner height hi: 50 mm
Inner widths Bi: 50 - 250 mm
bending radii R: 100 - 300 mm
Pitch: 58,8 mm
E-Tube, snap-open along the inner radius on both sides
Series R168
Inner height hi: 50 mm
Inner widths Bi: 50 - 250 mm
bending radii R: 100 - 300 mm
Pitch: 58,8 mm
E-Tube, snap-open along the outer radius on both sides
iF-Design-Award for Series R117/R118 and Series R68
ESD classification: Electrically conductive ESD/Atex versions on request
UL94-V0 Classifications on request
E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request
Other information
Series R117
Inner height hi: 21 mm
Inner widths Bi: 20 - 100 mm
bending radii R: 63 - 180 mm
Pitch: 30,5 mm
E-Tube, snap-open along the inner radius on both sides
Series R118
Inner height hi: 21 mm
Inner widths Bi: 20 - 100 mm
bending radii R: 63 - 180 mm
Pitch: 30,5 mm
E-Tube, snap-open along the outer radius on both sides
Series R157
Inner height hi: 40 mm
Inner widths Bi: 40 - 200 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
E-Tube, snap-open along the inner radius on both sides
Series R158
Inner height hi: 40 mm
Inner widths Bi: 40 - 200 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
E-Tube, snap-open along the outer radius on both sides
Series R167
Inner height hi: 50 mm
Inner widths Bi: 50 - 250 mm
bending radii R: 100 - 300 mm
Pitch: 58,8 mm
E-Tube, snap-open along the inner radius on both sides
Series R168
Inner height hi: 50 mm
Inner widths Bi: 50 - 250 mm
bending radii R: 100 - 300 mm
Pitch: 58,8 mm
E-Tube, snap-open along the outer radius on both sides
Installation video: Instructions for the opening and closing of the E-Tubes
E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table.
Selection aids
Installation instructions Joining and separating of the E-Tubes.
Assembly Instructions
Application examples Applications in various industrial sectors and in the igus® test laboratory.
E2 R100 and E2 R
Chip protection, swivelable
Excellent protection against chips (even hot chips)
Rugged and tight
Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time
Space-saving through good internal/external dimensions ratio
Modular interior separation options
Double stop dog system for longer service life and long, unsupported lengths
Universal KMA mounting brackets with potential for "all-round" fastening
Typical industrial sectors and applications
Machine tools
Timber Processing Machines
General mechanical engineering etc
In all areas exposed to dirt and chips
iF-Design-Award for Series R117/R118 and Series R68
ESD classification: Electrically conductive ESD/Atex versions on request
UL94-V0 Classifications on request
E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request
Overview for E2/000 advantages
Other information
Series EF2.21
Inner height hi: 21 mm
Inner widths Bi: 25 - 50 mm
bending radii R: 35 - 180 mm
Pitch: 33.3 mm
E-Chain®, snap-open along the outer radius
Series 1500
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
E-Chain®, snap-open along the outer radius
Series 1400
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
E-Chain®, snap-open along the inner radius
Series 1450
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
Half energy tube, snap-open along the inner radius
Series 1480
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
Full energy tube, snap-open along the inner radius
Series 2500
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 55 - 250 mm
Pitch: 46 mm
E-Chain®, snap-open along the outer radius
Series 2400
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 55 - 250 mm
Pitch: 46 mm
E-Chain®, snap-open along the inner radius
Series 2450
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
Half energy tube, snap-open along the inner radius
Series 2480
Inner height hi: 25 mm
Inner widths Bi: 38 - 103 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
Full energy tube, snap-open along the inner radius
Series 2700
Inner height hi: 35 mm
Inner widths Bi: 50 - 175 mm
bending radii R: 63 - 250 mm
Pitch: 56 mm
E-Chain®, snap-open along the outer radius
Series 2600
Inner height hi: 35 mm
Inner widths Bi: 50 - 175 mm
bending radii R: 63 - 250 mm
Pitch: 56 mm
E-Chain®, snap-open along the inner radius
Series 2650
Inner height hi: 35 mm
Inner widths Bi: 50 - 175 mm
bending radii R: 100 - 250 mm
Pitch: 56 mm
Half energy tube, snap-open along the inner radius
Series 2680
Inner height hi: 35 mm
Inner widths Bi: 50 - 100 mm
bending radii R: 100 - 250 mm
Pitch: 56 mm
Full energy tube, snap-open along the inner radius
Series 3500
Inner height hi: 45 mm
Inner widths Bi: 50 - 255 mm
bending radii R: 75 - 300 mm
Pitch: 67 mm
E-Chain®, snap-open along the outer radius
Series 3400
Inner height hi: 45 mm
Inner widths Bi: 50 - 255 mm
bending radii R: 75 - 300 mm
Pitch: 67 mm
E-Chain®, snap-open along the inner radius
Series 3450
Inner height hi: 45 mm
Inner widths Bi: 50 - 255 mm
bending radii R: 150 - 300 mm
Pitch: 67 mm
Half energy tube, snap-open along the inner radius
Series 3480
Inner height hi: 45 mm
Inner widths Bi: 75 - 115 mm
bending radii R: 150 - 300 mm
Pitch: 67 mm
Full energy tube, snap-open along the inner radius
Series 255
Inner height hi: 24 mm
Inner width Bi: 25 mm
Bending radii R: 55 - 250 mm
Pitch: 27.8 mm
E-Chain®, snap-open along the outer radius
CRC series. 255
Inner height hi: 24 mm
Inner width Bi: 38-103 mm
Bending radii R: 150 - 250 mm
Pitch: 27.8 mm
e-chain® Series CRC. 255
Assembly tool
E"2/000 e-chains® - quick opening with assembly tools.
Assembly tool
Overview E2/000 bow chains
Two-part - the E2 standard as clamp chain version
Overview E2/000 bow chains
ESD classification: Electrically conductive ESD/Atex versions on request
IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0
UL94 V0 classifications on request
46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0
iF Design Award for the E2/000 series EF2.21
Overview for E2/000 advantages
Other information
Series EF2.21
Inner height hi: 21 mm
Inner widths Bi: 25 - 50 mm
bending radii R: 35 - 180 mm
Pitch: 33.3 mm
E-Chain®, snap-open along the outer radius
Series 1500
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
E-Chain®, snap-open along the outer radius
Series 1400
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
E-Chain®, snap-open along the inner radius
Series 1450
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
Half energy tube, snap-open along the inner radius
Series 1480
Inner height hi: 21 mm
Inner widths Bi: 15 - 125 mm
bending radii R: 35 - 180 mm
Pitch: 33,3 mm
Full energy tube, snap-open along the inner radius
Series 2500
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 55 - 250 mm
Pitch: 46 mm
E-Chain®, snap-open along the outer radius
Series 2400
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 55 - 250 mm
Pitch: 46 mm
E-Chain®, snap-open along the inner radius
Series 2450
Inner height hi: 25 mm
Inner widths Bi: 25 - 125 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
Half energy tube, snap-open along the inner radius
Series 2480
Inner height hi: 25 mm
Inner widths Bi: 38 - 103 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
Full energy tube, snap-open along the inner radius
Series 2700
Inner height hi: 35 mm
Inner widths Bi: 50 - 175 mm
bending radii R: 63 - 250 mm
Pitch: 56 mm
E-Chain®, snap-open along the outer radius
Series 2600
Inner height hi: 35 mm
Inner widths Bi: 50 - 175 mm
bending radii R: 63 - 250 mm
Pitch: 56 mm
E-Chain®, snap-open along the inner radius
Series 2650
Inner height hi: 35 mm
Inner widths Bi: 50 - 175 mm
bending radii R: 100 - 250 mm
Pitch: 56 mm
Half energy tube, snap-open along the inner radius
Series 2680
Inner height hi: 35 mm
Inner widths Bi: 50 - 100 mm
bending radii R: 100 - 250 mm
Pitch: 56 mm
Full energy tube, snap-open along the inner radius
Series 3500
Inner height hi: 45 mm
Inner widths Bi: 50 - 255 mm
bending radii R: 75 - 300 mm
Pitch: 67 mm
E-Chain®, snap-open along the outer radius
Series 3400
Inner height hi: 45 mm
Inner widths Bi: 50 - 255 mm
bending radii R: 75 - 300 mm
Pitch: 67 mm
E-Chain®, snap-open along the inner radius
Series 3450
Inner height hi: 45 mm
Inner widths Bi: 50 - 255 mm
bending radii R: 150 - 300 mm
Pitch: 67 mm
Half energy tube, snap-open along the inner radius
Series 3480
Inner height hi: 45 mm
Inner widths Bi: 75 - 115 mm
bending radii R: 150 - 300 mm
Pitch: 67 mm
Full energy tube, snap-open along the inner radius
Series 255
Inner height hi: 24 mm
Inner width Bi: 25 mm
Bending radii R: 55 - 250 mm
Pitch: 27.8 mm
E-Chain®, snap-open along the outer radius
CRC series. 255
Inner height hi: 24 mm
Inner width Bi: 38-103 mm
Bending radii R: 150 - 250 mm
Pitch: 27.8 mm
e-chain® Series CRC. 255
Assembly tool
E"2/000 e-chains® - quick opening with assembly tools.
Assembly tool
Overview E2/000 bow chains
Two-part - the E2 standard as clamp chain version
Overview E2/000 bow chains
IPA Classification
Report IG 1303-640-1, tested 1500.050.038.0 at
v = 0,5 / 1,0 / 2,0
ISO Class 2, according to DIN EN ISO 14644-1
E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table.
Selection aids
Installation instructions Joining and separating of chain links, filling of the E-Tubes.
Assembly Instructions System E2/000
Recommended installation accessories
Application examples Applications in various industrial sectors and in the igus® test laboratory.
System E2/000
The E2 standard
Quickly opened from the right or left with a screwdriver or by hand - opening mechanism accessible from above
Lightning fast installation using thumb - safe seat without additional closing mechanism
The separators and interior separation sit safely, even when the E-Chain® is open
Excellent mechanical stability; design and material provide long service life
Typical industrial sectors and applications
General construction machinery
Materials handling technology
Construction machinery
Wood machines
Machine tools
Glass machines
Plastic machines
Long travels
Semiconductor
Theater and entertaining industry
Vehicles
And much more
ESD classification: Electrically conductive ESD/Atex versions on request
IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0
UL94 V0 classifications on request
46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0
iF Design Award for the E2/000 series EF2.21
Other information
Series 10
Inner height hi: 18 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 28 - 180 mm
Pitch: 30,5 mm
E-Chain®, not-to-be-opened
Series 11.031
Inner height hi: 23 mm
Inner width Bi: 31 mm
Bending radii R: 45 - 70 mm
Pitch: 30.5 mm
E-Chain®, not-to-be-opened
Series 11.080
Inner height hi: 28 mm
Inner width Bi: 80 mm
Bending radius R: 38 mm
Pitch: 30.5 mm
E-Chain®, not-to-be-opened
Series 11.1/11.2
Inner height hi: 41 mm
Inner widths Bi: 15 - 25 mm
bending radii R: 40 - 100 mm
Pitch: 30,5 mm
E-Chain®, not-to-be-opened
Series 14
Inner height hi: 20 mm
Inner widths Bi: 15 - 50 mm
bending radii R: 28 - 125 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series B15i
Inner height hi: 17 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 38 - 180 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series B17i
Inner height hi: 32 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 48 - 125 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series F17
Inner height hi: 32 mm
Inner height Bi: 15 mm
Bending radii R: 48 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series B15
Inner height hi: 17 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 38 - 180 mm
Pitch: 30,5 mm
E-Chain®, snap-open outside
Series B17
Inner height hi: 32 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 48 - 125 mm
Pitch: 30,5 mm
E-Chain®, snap-open outside
UL94-V2 classifications
Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California
Special version: Electrically conductive ESD/ATEX versions on request
Other information
Series 10
Inner height hi: 18 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 28 - 180 mm
Pitch: 30,5 mm
E-Chain®, not-to-be-opened
Series 11.031
Inner height hi: 23 mm
Inner width Bi: 31 mm
Bending radii R: 45 - 70 mm
Pitch: 30.5 mm
E-Chain®, not-to-be-opened
Series 11.080
Inner height hi: 28 mm
Inner width Bi: 80 mm
Bending radius R: 38 mm
Pitch: 30.5 mm
E-Chain®, not-to-be-opened
Series 11.1/11.2
Inner height hi: 41 mm
Inner widths Bi: 15 - 25 mm
bending radii R: 40 - 100 mm
Pitch: 30,5 mm
E-Chain®, not-to-be-opened
Series 14
Inner height hi: 20 mm
Inner widths Bi: 15 - 50 mm
bending radii R: 28 - 125 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series B15i
Inner height hi: 17 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 38 - 180 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series B17i
Inner height hi: 32 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 48 - 125 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series F17
Inner height hi: 32 mm
Inner height Bi: 15 mm
Bending radii R: 48 mm
Pitch: 30,5 mm
E-Chain®, snap-open inside
Series B15
Inner height hi: 17 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 38 - 180 mm
Pitch: 30,5 mm
E-Chain®, snap-open outside
Series B17
Inner height hi: 32 mm
Inner widths Bi: 15 - 100 mm
bending radii R: 48 - 125 mm
Pitch: 30,5 mm
E-Chain®, snap-open outside
E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table.
Selection aids
Installation instructions Joining and separating of chain links
Assembly Instructions
Application examples Applications in various industrial sectors.
E2 mini
One-/Two-piece E-Chain®
Small pitch for silent operation
High torsion resistance
Double stop system and large pins for long service life
Optimized weight/stability ratio
Easy to mount
Manifold interior separation
Typical industrial sectors and applications
Construction machinery
Handling systems
Installation
Packaging machines
Textile machines
Vehicle construction
Wood machines
Glass machines
Machine construction
General mechanical engineering etc.
UL94-V2 classifications
Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California
Special version: Electrically conductive ESD/ATEX versions on request
E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options.
Other information
Series 03
Inner height hi: 5 mm
Inner widths Bi: 5 - 10 mm
bending radii R: 10 - 28 mm
Pitch: 10 mm
E-Chain®, not-to-be-opened
Series 04
Inner height hi: 7 mm
Inner widths Bi: 7 - 30 mm
bending radii R: 15 - 48 mm
Pitch: 16,7 mm
E-Chain®, not-to-be-opened
Series 045
Inner height hi: 10,3 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 13 mm
E-Chain®, not-to-be-opened
Series 05
Inner height hi: 10 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, not-to-be-opened
Series 06
Inner height hi: 10,5 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, not-to-be-opened
Series 08
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 25 - 48 mm
Pitch: 20 mm
E-Chain®, not-to-be-opened
Series B07
Inner height hi: 10,3 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, snap-open along the outer radius
Series B09
Inner height hi: 14,3 mm
Inner widths Bi: 16 - 40 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
E-Chain®, snap-open along the outer radius
Series 074
Inner height hi: 10.9 mm
Inner widths Bi: 10 - 40 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, snap-open along the inner radius
Series 094
Inner height hi: 14,3 mm
Inner widths Bi: 10 - 40 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
E-Chain®, snap-open along the inner radius
Series E2.10, openable along the outside
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
e-chain®, snap-open outside
Series E2i. 10, openable on the inside
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
e-chain®, snap-open inside
Serie E2C. 10, closed
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
e-chain®, closed
Series E2.15, openable along the outside
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
e-chain®, snap-open outside
Series E2i. 15, openable on the inside
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
e-chain®, snap-open inside
Serie E2C. 15, closed
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 75 mm
Pitch: 20 mm
e-chain®, closed
iF-Design-Award for E2 micro Series 05
Clean room test on request
Special design: Electrically conductive ESD/Atex versions on request
UL94-V0 classification for Series 03 and Series 14 (more on request)
42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0
E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options.
Series 03
Inner height hi: 5 mm
Inner widths Bi: 5 - 10 mm
bending radii R: 10 - 28 mm
Pitch: 10 mm
E-Chain®, not-to-be-opened
Series 04
Inner height hi: 7 mm
Inner widths Bi: 7 - 30 mm
bending radii R: 15 - 48 mm
Pitch: 16,7 mm
E-Chain®, not-to-be-opened
Series 045
Inner height hi: 10,3 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 13 mm
E-Chain®, not-to-be-opened
Series 05
Inner height hi: 10 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, not-to-be-opened
Series 06
Inner height hi: 10,5 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, not-to-be-opened
Series 08
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 25 - 48 mm
Pitch: 20 mm
E-Chain®, not-to-be-opened
Series B07
Inner height hi: 10,3 mm
Inner widths Bi: 6 - 64 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, snap-open along the outer radius
Series B09
Inner height hi: 14,3 mm
Inner widths Bi: 16 - 40 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
E-Chain®, snap-open along the outer radius
Series 074
Inner height hi: 10.9 mm
Inner widths Bi: 10 - 40 mm
bending radii R: 18 - 38 mm
Pitch: 20 mm
E-Chain®, snap-open along the inner radius
Series 094
Inner height hi: 14,3 mm
Inner widths Bi: 10 - 40 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
E-Chain®, snap-open along the inner radius
Series E2.10, openable along the outside
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
e-chain®, snap-open outside
Series E2i. 10, openable on the inside
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
e-chain®, snap-open inside
Serie E2C. 10, closed
Inner height hi: 10 mm
Inner widths Bi: 6 - 50 mm
bending radii R: 10 - 38 mm
Pitch: 20 mm
e-chain®, closed
Series E2.15, openable along the outside
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
e-chain®, snap-open outside
Series E2i. 15, openable on the inside
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 48 mm
Pitch: 20 mm
e-chain®, snap-open inside
Serie E2C. 15, closed
Inner height hi: 15 mm
Inner widths Bi: 10 - 50 mm
bending radii R: 28 - 75 mm
Pitch: 20 mm
e-chain®, closed
E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table.
Selection aids
Installation instructions Joining and separating of the E2 micro E-Chain®.
Assembly Instructions
Application examples Applications in various industrial sectors.
E2 micro
For restricted spaces
One and two-piece E-Chains®, from 5 mm inner height
High torsion resistance
Smallest inner heights and bending radii
Mounting brackets with strain relief optional
Small pitch for silent operation
Cable-friendly interior
Low weight
Large pins for a long service life
Favorable internal/external dimensions ratio
B07/B09 in two parts - Can be folded out in outer radius due to integral hinges
Typical industrial sectors and applications
General construction machinery
Models (micro E-Chain®),
Automatic doors
Vehicles
Measuring machines
Electronics
Handling systems
Pick and place robot
iF-Design-Award for E2 micro Series 05
Clean room test on request
Special design: Electrically conductive ESD/Atex versions on request
UL94-V0 classification for Series 03 and Series 14 (more on request)
42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0
igus® develops and manufactures plastic-based energy chains, highly flexible lines for active utilisation purposes in energy supply chains, as well as maintenance-free plain bearings, joint bearings and linear systems manufactured from high-performance plastic. Ready-to-use energy chains, including lines and plugs, ready-to-use cables/lines according to manufacturer standards or as individually requested by clients, as well as drive technology, plastic ball bearings, semi-manufactured goods and robotic joints form part of the igus® range. We have more than 100, 000 products in stock and from "batch size one".
Mit enjoyneering entfesseln Sie Ihr technisches Potenzial und Ihre Kreativität mit spielerischer Leichtigkeit. Unser neues Konzept konnten Sie erstmalig auf der Hannover Messe 2023 an zwei Messeständen erleben und reale Innovationen sowie digitale Revolutionen entdecken. Technik verbessern leicht gemacht!