Germany
Manufacturer/ Producer
ILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D1160 CC / FISCHER® AUTODEST® 850 AC is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. The unit extends the current test method and does not limit your vacuum distillation testing options. You are able to define your own tailored program also beyond the current standard. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The design also grants an easy maintenance by the operator. The analysis protocol is printed out simultaneously to the distillation and the distillation curves in actual boiling temperatures (ACT) and atmospheric equivalent temperatures (AET) as well as essential distillation parameters are shown on the monitor. The final data and the distillation curves are printed and stored on harddisk.
ILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The system is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. It is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector with 20 receivers includes a builtin internal balance for the determination of the fraction weight, while the separate volume follower system is used for discharging the fractions into the final receivers and the determination of the fraction volume as well as for the direct distillation rate control. The vacuum equipment and the control system are designed for highest accuracy, repeatability and reproducibility of data. Numerous optional items available.
ILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D2892 MC/ FISCHER® AUTODEST® 800 MC is an automated, computer controlled and PC operated unit of turnkey design, ready for use after installation and commissioning. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. A respective design as per ASTM D5236 (Postill) is also available.
ILUDEST DESTILLATIONSANLAGEN GMBH
Germany
Fully Automated/Computerized Distillation System for fractionating of crude oil samples, atmospheric residues resp. vacuum distillations of lubricating oil samples up to very low operation pressure (high vacuum HV Operation pressures down to 0.005 mmHg, allowing fraction temperatures up to 600 °C AET). The unit is equipped with an automatic fraction collector (FC) and combined automatic fraction discharge into final receivers, which are closed automatically. The fraction volumes and weights are determined by builtin volume follower system and internal balance (included software "FCExtension" allows to operate very narrow fractions by using max. 40 receivers).
We have specialised in the fascinating area of distillation. Due to our systems' multitude of applications and the high qualification level of our employees, we are familiar with almost all problems which can be resolved by distillation. Be it for the experimental stage in the laboratory, the pilot stage in the technical centre or on an industrial process scale – ILUDEST® supplies systems perfectly tailored to the given application, and for throughput rates ranging from a few ml to 100 l/h. Simple operation with PC and modern measuring and controlling electronics make us leaders in the design, development and manufacture of distillation systems. Every ILUDEST/i-Fischer system is a unique high-end product that is precisely coordinated to the specific concepts of our customers and turns challenges into solutions. 100 ml per day or 100 litres per hour, solvents or acids, scents or crude oil, at 350 °C or 10-3 mbar … We have been established on the global market as an expert in thermal process technology since 1990. Our systems are used in research, development and production in the chemical, pharmaceutical and food industries, as well as in biochemistry. Further areas of use are teaching, and training in vocational schools, colleges and universities. Whatever your process conditions are like, we offer the right solution all over the world, with the highest German standard of quality and reliability.
Annual show for the global Laboratory & Analytical Industry in the Middle East. ILUDEST will present its solutions for the petrochemical industry, for the quality assessment of crude oil and its products as well as for the production and purification of chemicals, modern equipment for thermal process engineering, especially distillation and rectification, extraction, reaction, absorption as well as for solvent recovery.
Manufacturer/ Producer
Dachdeckerstrasse 1
97297 Waldbüttelbrunn - Germany
BÜRKLE GMBH
Germany
With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.
BÜRKLE GMBH
Germany
With the thread adapter made of high-quality stainless steel 1.4301 (304) a pump, a drain cock or any other connection with thread G 2" (Whitworth pipe thread) can be screwed onto a container with G 1 1/2" thread. The thread adapter adapts and thus compensates for different thread shapes. The drum adapter ensures that decanting is liquid-tight; a seal made of ePTFE reliably seals the connection. The thread adapter made of stainless steel is electrically conductive and highly chemically resistant. It can therefore be used for filling solvents and other flammable liquids (e.g. alcohols, petrol, diesel etc.) as well as for weak alkalis and acids.
BÜRKLE GMBH
Germany
With Novartos Multi triple sampling, a triple multi-point sample can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine sample chambers are each fitted with three sample inserts fot the triple sampling.
KASAG SWISS AG
Switzerland
The task of storing liquids hazardous to water or to their processing must be handled responsibly. In the building of the corresponding process containers, storage tanks, stainless steel containers, different factors must be taken into consideration. They are designed according to regulations, such as PED (AD-2000, SVTI, EN13445) or according to special standards, such as the Basel chemical standard BN76 and manufactured in stainless steel. Process containers and storage tanks have half-pipe coils, jackets or laser-welded structures (pillow plates) for heating and cooling purposes. KASAG is the competent place if you are looking for replacement, modification, extension or reconstruction of complete tank plants. We will share your responsibilities.
Create one request and get multiple quotes form verified suppliers.
