IROS 03 Extendable FTIR Spectrometer
FTIR spectrometry
Description
IROS 03 Fourier infrared spectrometer is designed to record absorption spectra of solid, liquid, and gaseous substances in the near and medium IR region (including drugs, varnishes and paints, oil products, pharmaceuticals, polymer films, and fibers) with their subsequent identification, as well as for qualitative and quantitative analysis of mixtures containing several components. Main Advantages: - Unique misalignment-free, humidity and temperature change resistant Double Cat’s Eye interferometer - Sealed drainable optical unit - The ability to expand the spectral range using additional radiation sources, detectors and beam splitters - Three ports for connecting external devices - Great variety of extension modules IROS 03 FTIR Spectrometer can be equipped with a large number of extension modules. It makes possible to use IROS 03 for different common and specific applications.
- Measurement and control instruments
- Infrared Spectrometer
- FTIR
- Laboratory spectrometer
Product characteristics
- Spectral range with ZnSe beam splitter
- 5 700 – 470 cm-1
- Spectral range with KBr beam splitter and photodetector window
- 7 900 – 350 cm-1
- Spectral range with DLaTGS
- 8 500 – 470 cm-1
- Beam splitter
- ZnSe, Diamond, KBr
- Interferometer
- Double Cat’s Eye
- Detector
- MG-32M, DLaTGS, MCT
- Light source
- SiC
- Spectral resolution
- 0,4 cm-1
- Signal-to-noise ratio
- ≥ 50 000 RMS (range 2 200 – 2 000 cm-1, per 1 min, res. 4 cm-1)
- Connection of IR Microscopes
- IR M2/M3
- Sealed housing
- Yes
- Control electronics
- USB interface and self-test device
- External optical output
- Yes
- Weight
- 18 kg
- Dimensions of main unit
- 630 × 305 × 210 mm
Documents
Similar products
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
TROTEC GMBH
Germany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
SCHNIEWINDT GMBH & CO. KG
Germany
The CSN® type RCVoltage Dividers consist of a proven reliable and high accuracy resistivecapacitive voltage divider. These are used for voltage measurement for control and protection systems in HVDC links and research institutes. The base for our Voltage Dividers are metal wire resistor webs that have been embedded in epoxy resin under vacuum. In this way, optimal protection against external influences can be achieved. Depending on the installation requirements (outdoor or indoor application), special designs of the voltage dividers adapted on the site requirements are used. The insulation medium (air, N2, SF6) can be easily adapted to the special requirements of the application. Our CSN® RCVoltage Dividers are characterized by
Request for quotes
Create one request and get multiple quotes form verified suppliers.
- Only relevant suppliers
- Data privacy compliant
- 100% free