Romania
Manufacturer/ Producer
Romania
Our company is specialized on aluminum machining and more specifically electronics enclosure manufacturing. If you need aluminum products, contact us for price offer or send us your target price.
Request for a quoteRomania
This is a universal fuel pump remote control which controls 5 different fuel pump types. This product is designed for fuel service companies, it can substitute 5 remote controls by itself. With the DIP-Switches the user can easily switch to the desired pump type and control the pump just like with the original remote control. This gas pump remote control can handle five different types of fuel dispenser: • Tokheim WWCT, COCA • Satam • Wayne Dresser IGEM • Tatsuno Benc • Adast Features • High power infrared (up to 4 m working distance) • 5 in one remote controller • Durable case • Battery saver function • Indication LED
Request for a quoteRomania
Isolated USB to RS485 converter module This USB to RS485 converter is designed for industrial use and it makes a half-duplex RS485 connection. With its metal housing this converter is highly recommended for factory environment, but it is also suitable for any other industrial installations. This converter is powered through the USB plug and no external power supply is required. Using the high performance industry proven Ft232 processor from FTDI, the converter ensures optimum reliability and performance. More about Ft232 processor from FTDI Future Technology Devices International Ltd https://www.ftdichip.com/ Features • Optical isolated • Two-way communication (USB to RS485 / RS485 to USb ) • Input over voltage protection • Short circuit protection • USB 2 compatible • Visual indicator LED for RX -TX • Supply voltage from the USB • FTDI chip • Wall mountable aluminium case • Plug and Play • 2500 V isolation
Request for a quoteRomania
The LSP-IV2 isolator is designed to make galvanic isolation between the transmitter and the processing unit (PLC). With its 3 point galvanic isolation, it separates the input and the output from each other. This instrument is suitable for any industrial application where 0-5V or 0-10V analog signal is used. It reduces the impact of interference and ground potential differences. The module ensures 3500VDC isolation. Features • Three way isolated • 3500kV isolation • TS-35 DIN rail mounting • +/-0.1% accuracy • Ip40 case • Screw terminals • Power LED • 0-10V analog output • Supply voltage 24VDC • Made in EU
Request for a quoteRomania
This device is an advanced transmitter for measuring conductivity and temperature in water treatment applications. It uses WiFi communication for configuration and has configurable analog outputs for both conductivity and temperature measurements. Additionally, it can be connected with sensors that have any type Features • WiFi connection for configuration • MODBUS • Conductivity, resistivity and temperature measurement • Configurable signal output for the conductivity (0 -20mA; 4-20mA; 0-24mA; 0-10V) • Configurable signal output for the temperature (0 -20mA; 4-20mA; 0-24mA; 0-10V) • Switching digital output Relay (Switching point is configurable through setup program) • Cyclical self calibration • Linear temperature compensation • Electrically isolated input, output and supply • DIN rail mounting • Compensation of the cable capacity • Calibration of the cell constant https://www.youtube.com/watch?v=uD7sGGopCY0
Request for a quoteRomania
The LSP-TSTS is a slim design easy to use temperature transmitter for Pt100/Pt1000 3 wire or 2 wire temperature sensor. This device provides a linearised 4-20mA signal output, proportional to the temperature characteristic of the Pt100 or Pt1000 sensor. Temperature range can be changed on request before order (Default -15 to 150ºC). Features • RTD type Pt100 or Pt1000 Input • 4 to 20 mA linearised output on current loop or 0-10V • TS-35 DIN rail mounting • +/-0.1% accuracy • Ip40 case • Screw terminals • Easy to use • Supply from current loop
Request for a quoteRomania
This product is made for connecting fuel pumps with Gilbarco 2-Wire protocol to POS. This interface can handle four pumps at the same time. Features • 4 inputs • USB 2 compatibility • Power check LED • Wall mountable housing • RX/TX
Request for a quoteRomania
This device splits the analog input into two outputs, identical to the input signal and in the same time, it ensures a galvanic isolation. Order CodeInput Output1 Output2 LSP-IAS-0200(4)-20mA0(4)-20mA0(4)-20mA LSP-IVS-0100-10V 0-10V 0-10V LSP-IVS-0050-5V 0-5V 0-5V Features • Four way isolated • 3500VDC isolation • TS-35 DIN rail mounting • +/-0.1% accuracy • Ip40 case • Screw terminals
Request for a quoteRomania
This device is used for converting standardized analog signals (0(4)-20mA, 0-10V, 0-5V) for example 4-20mA input to 0-10V output. The device has to be ordered for the specific conversion and can not be changed afterwards.
Request for a quoteRomania
This communication module is made for the Gilbarco DOMS Veeder Root. Together they are communicating with fuel pumps, which are using 2 wire current loop communication like Gilbarco Sk700. The product is equivalent to DSB338 and DSB511, but we redesigned it. We manufactured according to our own designs and drawings.
Request for a quoteManufacturer/ Producer
Nr. 1447/C
537140 Lueta - Romania
Bulgaria
The new CNC milling machines with vertical center with 3 and 5 axis machines give us a possibility to produce complex details with excellent quality. We work usual steel, stainless steel, aluminum, cast iron, brass. The maximum dimension of detail is 1200x600x600 mm, by 5 axis work ф320 mm. The maximum weight of the product is 1000 kg. The company possess universal milling machines, which are used for production of details with small series, repair of instruments, producing of single pieces
Request for a quoteBulgaria
The company have Milling machine with vertical center with 3 and 5 axis with CNC controls. Maximum size of details which we can work is 1200x600x600 mm and maximum weight – 1200 kg. We produce details from all types of steels, crude iron and non-ferrous metals. We possess with instrumental equipment for producing and repairing of devices and instruments, needed for different production of the company. The main details which we produce are: Pneumatic dividers for compressors Тooth wheels Hydraulic distributors Parts and components for mechanical engineering Details and units for the food industry
Request for a quoteTurkey
Pivots are at the center of any rotational movement. Exposed pivots often experience lug wear which occurs due to the clearance between the bore and the conventional pin. This is commonly repaired with line boring. What if there is a modern alternative to line boring that ensures no more lug wear and allows a greater capacity at any given size? Expander Pins are used on some of the world's biggest Original Equipment Manufacturers (Caterpillar, Komatsu, Volvo, John Deere etc) including installed equipment in a vast amount of industries.
Request for a quoteTurkey
"Professional, Qualified and Experienced.. Best choice for your milling operation needs We are serving CNC milling operations to customers all around the world. Milling allowable part dimensions X:800 Y:500 Z:350 ± 0.01 mm Tolerance"
Request for a quoteCreate one request and get multiple quotes form verified suppliers.