Slovakia
Manufacturer/ Producer
Slovakia
coated rods for perfect and leak proof joints. available coating ratio is 60/40.65/35. 70/30.75/25.80/20.
Request for a quoteSlovakia
Brazing is typically used when joining pieces of the same metal type, such as steel to steel or copper to copper..
Request for a quoteSlovakia
copper-phosphorous brazing alloy, with good flow properties. It can be used to join copper to copper or copper based base materials (e.g. bronzes / brasses), on vibration free joints. CuP7 is very fluid at brazing temperature and will penetrate into narrow gaps and tight joints. The phosphorus contained in the alloy acts as a fluxing agent, so that it is not necessary to use an additional flux when brazing copper to copper; however when joining copper based materials (e.g. bronzes / brasses) a proper flux should be used.
Request for a quoteIn 2017, we identified a significant gap in the brazing industry, inspiring the creation of Metallurgical Ltd. Our mission was clear: enhance the quality, cost-effectiveness, and application expertise within the industry. Fast forward to 2023, Metallurgical Ltd expanded its horizons to address environmental challenges, venturing into plastic re-granulates to contribute to sustainability. Through dedicated research and development, we introduced innovative recycled materials such as ABS, PP and HIPS solidifying our position as leaders committed to both excellence and eco-friendly solutions. Partnering with renowned recycling facilities and participating in initiatives like the EPEAT program showcased their dedication to a greener future. Today, Metallurgical Ltd is successfully addressing the initial gap in the brazing industry and evolved into a key player in both metallurgy and plastic recycling. Our journey underscores a commitment to excellence, sustainability, and the pursuit of greener, more responsible industry practices.
Manufacturer/ Producer
Pri prachárni 20
040 11 Kosice, Slovakia - Slovakia
Germany
Swept outlet similar to ANSI B 16.19 / ANSI B 36.10 Swept outlets in pipeline construction A swept outlet is used in pipeline construction just like a welding outlet, a socket welded outlet or a threaded outlet for a 90 ° branch. A swept outlet is an alternative to the T-piece / red. In comparison to the T-piece / Red.Tee, the installation effort for a swept outlet is lower because only one hole has to be drilled into a pipe. The swept outlet can then be welded into this hole. A swept outlet differs from a welding outlet in the type of welding. While a welding outlet is only placed on the run pipe and then welded, a swept outlet is welded directly into the run pipe. Ideal stress distribution Swept outlets were developed in order to achieve the best possible stress distribution for internal pressure and pipe forces. Due to the favorable voltage level, swept outlets are often used in highly stressed pipes in the oil and gas industry.
Request for a quoteSwitzerland
The mta OEM soldering robot for integrator can be used for semi or fully automatic operations of selective point to point soldering from above. Thanks to its unique concept, the OEM robot is delivered to the system’s manufacturer with a process guarantee. The OEM robot can be equipped with any of mta’s soldering heads: soldering iron, induction, microflame; except for the mta MLH45 laser head. The 3 or 4 axes of the OEM robot are fully programmable through the mta-MotionEditor software, including soldering parameters such as: Solder quantity, wire feed speed, preheating/postheating times, automatic tip cleaning cycle intervals and other parameters for each soldered point. With its flexible and modular concept, the OEM robot can be fully and easily integrated into a production line.
Request for a quoteSwitzerland
The TR300 is mta’s table-top soldering robot platform. This robot is purpose-built and standardized for semi-automated applications that require point-to-point soldering. The table-top platform is a cost-effective solution to automate existing hand-soldering processes without the cost of fully-automated systems. Automating the solder process has several advantages over hand soldering. It produces highly consist joints, improved quality, higher throughput, and it requires less skill and training than hand soldering. This table-top soldering robot platform is also ideal for applications where human dexterity is required to position the parts. This is because operators can load and unload the parts in offline fixtures to minimize machine downtime. Because the TR300 is a purpose-built solution, it can support any of mta’s soldering heads without compromise. The ball-screw axis and motors provide fast repeatable motion.
Request for a quoteSwitzerland
As a complement or an alternative to wave, mini-wave and traditional selective soldering techniques, the MPS700 bottom side selective soldering machine provides maximum accessibility and meets mass production requirements of quality, reliability and cycle times. The iron head is equipped with a powerful heating element and a high precision wire feeder. The solder point positions are adjusted using a compact vision system close to the iron head. A 4-axis system guarantees quick and precise movements. The MPS700 can be equipped with mta classic soldering iron head and MSH150 soldering iron head.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.