MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG

MicroControl’s I/O modules of the µCAN-BOX product family provide the link for digital and analogue I/O signal networking on a CAN bus. The premium electronics of our µCAN modules facilitates connection of a wide range of sensors and actuators. A/D conversion directly on the spot has significant advantages: due to their robust design the modules may be installed directly at the signal source – even in adverse environmental conditions. An additional control cabinet is not needed. The electronics of the µCAN-BOX series is tightly packed in a rugged aluminium casing (IP66 rated) protecting it reliably from dust and water. Signal wires may be connected via metric cable connectors or M12 plug-in connectors.

Voltage +/- 10 V Current 0(4)…20 mA Accuracy 0.01 % (FS) Resolution 16-bit (1 mV / 1 µA) Sampling rate 20 ms / 50 Hz Galvanically isolated fieldbus Electronics protected up to 40 G (option) Vibration resistant up to 4.5 Grms (option) Feldbus CAN Protocol CANopen / Raw CAN

Strain gauge full bridge Voltage 0…100 mV Supply voltage 5.0 V Accuracy 0.1 % (FS) Resolution 16-bit (1 µV) Sampling rate 20 ms / 50 Hz Galvanically isolated fieldbus Electronics protected up to 40 G (option) Vibration resistant up to 4.5 Grms (option) Fieldbus CAN Protocol CANopen / Raw CAN

The µCAN.1.ti-BOX is the single channel solution for measuring temperatures. Resistance sensors as well as thermocouples may be connected to the module. The CAN interface supports the protocol CANopen.Temperature Thermo type J, K, L Temperature Pt100 (2- / 4-core) Accuracy +/- 0.5 K (Thermo) Accuracy +/- 0.1 K (Pt100) Resolution 16-bit (0.1 °C) Sampling rate 20 ms / 50 Hz galvanically isolated fieldbus Signal type freely configurable Electronics protected up to 40 G (option) Vibration resistant up to 4.5 Grms (option) Fieldbus CAN Protocol CANopen / Raw CAN

The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen.Voltage +/- 10 V Current 0(4)…20 mA Accuracy 0.01 % (FS) Resolution 16-bit (1 mV / 1 µA) Resolution up to 24-bit (0,01 mV / 0,01 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Adjustable scaling Signal type freely configurable Protected against mechanical stress Fieldbus CAN Protocol CANopen / Raw CAN

The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939.Voltage +/- 10 V Current 0…20 mA Accurany 0.05 % (FS) Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz Galvanically isolated fieldbus Galvanically isolated analogue outputs Signal type freely configurable adjustable scaling Protected against mechanical stress Fieldbus CAN Protocol CANopen / Raw CAN

The µCAN.4.sg-BOX is a decentralized measurement data acquisition module for the acquisition of four strain gauges or resistance bridges. The resistance bridge date is acquired at a total sampling rate of 400 Hz.Strain gauge full- / half- / quarter bridge Voltage +/- 60 mV Supply voltage 4.096 V Accurany 0.01 % (FS) Resolution up to 24-bit (1 µV) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Anti-aliasing filter Adjustable scaling Protected against mechanical stress Fieldbus CAN Protocol CANopen / Raw CAN