OMEGA AIR

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>

BF filters are designed for protection of the downstream compressed air system and equipment against defects and other failures. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

CS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CS cyclone separator it is essential to install automatic or electronic condensate drain. CS cyclone separators are also available in stainless steel version CS-SS.

SFH condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH cyclone separator it is essential to install automatic or electronic condensate drain. SFH cyclone separators are also available in stainless steel version SFH-SS.

AAFs filters are designed for applications in paint industry. Quantity of substances that could cause impairments in paint wetting applications or cause defects in paint work have been reduced to a minimum. To meet the required compressed air quality appropriate “paint compatible” filter element must be installed into filter housing.

AAF HT series - Aluminium high temperature compressed air filters are designed for very high efficient removal of solid particles, water and oil aerosols, from compressed air systems in high-temperature applications. To be able to achieve the required compressed air quality, an appropriate filter element (BHT, N25HT, N5HT, XRHT, XMHT, XSHT) must be installed into the filter housing.

AAF O2 series of filter housings have been specifically developed for high efficient removal of solid particles from compressed Oxygen applications.

P-VAC filters are designed for protection of vacuum pumps. These filters are optimized for high-efficient removal of solid particles and other contamination from the suction side of vacuum pumps preventing damage to the pump. Two filtration stages are available for P-VAC filters. Rough prefilter “VACP” removes bulk liquid and large solid particles, while high efficiency microfilter VACM removes very fine impurities which may damage the pump.

M-VAC filters are designed for medical vacuum applications. Medical vacuum filters are optimized for high efficient removal of bacterial and other contamination (solids and liquids) from the suction side of vacuum pumps preventing damage to the pump and the potential biological infection of the surrounding environment. Removed liquids are collected in a transparent flask which can be removed for sterilisation. The efficiency of the installed filter elements exceeds the 0,005 % penetration specified in HTM 2022 for infectious disease units, when tested in accordance with BS 3928.

BF HP filters are designed for protection of the downstream compressed air system and equipment against defects and other failures in high pressure applications. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 25 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.