Czech Rep.
Manufacturer/ Producer
We produce hydraulic presses since 1994 and we already have many satisfied customers. Hydraulic presses are designed for the implementation of the pressing and similar operations in engineering production. On the basis of these experiences are now machines with hydraulics for wide use in the industry. Our production includes the following groups of presses: vertical and horizontal baling presses for municipal waste, textiles and metalshydraulic presses for repair shops, metalwork, and other areas where pressing procedures with rigid press fit forces up to 5000 kN are needed; specific implementation of presses with rigid press fit forces up to 15 000 kN; pneumatic-hydraulic presses with a power up to 200 kN. Our hydraulic presses are designed, in principle, on the basis of the requirements of the customers and thus correspond to the specific needs of technological processes.
Manufacturer/ Producer
Důlní 106
415 10 Teplice - Czech Rep.
Germany
The RUF briquetting systems of the Biomass series process dust, shavings and wooden chips into briquettes of consistently high quality and density. Varying bulk densities are offset automatically during the process. These materials can be pressed into a compact form without the use of binders. It is important that the moisture content of the chips is below 15%, preferably under 12%, and that the chip size does not exceed 50mm. The general rule is that the finer the material is, the smoother and more solid the surfaces and edges of the resulting briquette. The systems can be equipped with a multitude of options, thus optimally adapting them to customer needs. This series offers maximum flexibility. All systems are extremely energy efficient thanks to the innovative RUF hydraulic system. Depending on the model, the machines are equipped with motors ranging between 4 kW and 90 kW. The throughput capacities of the RUF Biomass presses range between 50 and 1,300 kg/h.
Request for a quoteFrance
A flow straightener greatly reduces disturbances in a flow while a conditioner reduces disturbances and also allows a good redistribution of the speed profile, at each point of the section of the pipe. Thus, these devices make it possible to reduce the upstream straight lengths and to improve the measurement accuracy in the case of a flow measurement. They are therefore to be positioned between a pipe fitting (elbow, reduction, etc.) and a flow measurement element while respecting the distances specified in the standard.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.