PVR PRINT UNIPESSOAL LDA

PORTABLE INKJET MARKER MOD. FPA2-SMART MOB - MAXIMUM PRINTING HEIGHT 12.7 mm New portable inkjet marker, suitable for marking on porous, semi-porous (boxes, cardboard boxes) in different work stations. Allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on 4 lines with a total height of 12.7 mm. The marking speed is set directly on the marker keypad and you can always write accurately and without deformation of the characters. The cartridges are independent and directly in contact with the print head. The marker is equipped with an automatic nozzle cleaning system so in case of very long machine stops, there is no danger of blocking, but simply replace the exhausted cartridges without further maintenance. The message to be printed can be set by PC in any Word font format. To use it, simply save it on the SD card included in the machine.

The DSL professional inkjet marker is suitable for marking on porous surfaces (cartons, cartons). Thanks to the external ink tank, it is possible to position the marker on automatic lines and save considerably on consumables and cartridge replacement times. The cartridges contain 420 ml. The cost of printing is about 5 times lower than the other FPA2 series markers. It allows to print alphanumeric texts, logos, date / time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 5,4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages.

The FPA2-PRO marker is the most professional version of inkjet markers. It allows to write up to 12,7 mm on several lines of printing, even on non-porous surfaces (boxes, bottles, glossy cards, jars, etc.). It can reach a speed of 72 m/min. It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 2,7 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (maximum 12,7 mm) and any Word font format.

The ONE inkjet marker is a professional model but very simple to set up and use. It is suitable for marking mainly on porous (boxes, carton boxes) and semi-porous surfaces (with special cartridge). It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 25,4 mm. The minimum printing height is about 5,4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. Following tests, unlike other cartridges, they proved to be working even after leaving them uncovered for weeks. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (max 25,4 mm) and any Word font format.