Preparation system

Preparation system for granulation (PSfG) is our proprietary solution whose task is to stabilise and maintain the moisture content of the material fed to the granulation section at a level of ± 0.5% and to dose an appropriate amount of binder (e.g. corn meal), which significantly impacts on improving the physical and chemical properties of the final product. Stable moisture content and the addition of the proper amount of binder have a key impact on obtaining and maintaining high quality parameters of the pellets produced, such as: calorific value, hardness, strength, amount of ash after burning and dust content in the pellets. Proper moistening and maintaining the humidity of the sawdust at the required level greatly facilitates the compacting and binding of the material particles into granules, and thus enables to achieve a uniformly high quality of granules.

The ViscoTreat-R preparation and feeding system ensures an even and reliable product supply. At the same time, the medium is optimally prepared for the production process by stirring and circulating. The use of the VRP dispenser series for the further transport of the medium offers the following advantages: optimal processing of viscosities up to 50,000 mPas very low shear stress of the medium very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - no air supply necessary - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - Stator material is adapted to the medium to be pumped Application: - Feeding and processing of medium to highly sensitive media, e.g.: Silicones, adhesives, resins, greases, colour pastes, metal-filled pastes

Tube squaring machines are necessary to achieve burr-free and right-angled seam preparation for orbital welding. That‘s why Orbitec offers two machines, from the small handy Planfix 40 S to the large Planfix 115 S. The Planfix 115 S is a high-performance tube squaring and chamfering device with angle gear for mobile or stationary use with a mains drive. It has a large viewing window, a chip collector and a feed with 0.1mm scale graduation. Optionally, the device can be equipped with a tool carrier and a double-sided indexable insert holder or the well-known Orbitec L facing tool bits. Package includes exemplary for Planfix 115 S Power 230 V: — Tube clamping attachment — Drive — Tool set — Transport box

Tube squaring machines are necessary to achieve burr-free and right-angled seam preparation for orbital welding. That‘s why Orbitec offers two machines, from the small handy Planfix 40 S to the large Planfix 115 S. The Planfix 40 S is a powerful and handy squaring device for mobile or stationary use with battery or mains drive. It has a large viewing window, a tool carrier for mounting the inserts, double-sided indexable inserts, and a feed with 0.1mm scale graduation. Alternatively, existing Orbitec facing tool bits can be used without tool carriers. The new inserts have a long service life and can process unalloyed, low-alloy and high-alloy steel quickly and reliably with high precision. Package includes exemplary for Planfix 40 S battery pack 230 V: — Tube clamping attachment — Drive — 2 Li-ion batteries — Battery charger — Tool set — Carrying case