ROTAFIX

Rotafix Structural Adhesive (RSA) is a high performance unfilled thixotropic slow setting structural epoxy adhesive which is used in timber engineering. The slow setting nature of the epoxy adhesive allows the manipulation of timber joints for a period of time. This is particularly useful for flooring boards, roofing sheets or complex joints. RSA is used extensively for: Bonding rods and plates into timber engineering repairs, such as Timber Resin Splice Upgrading timber strength using bonded in flitch plates GluLam delamination repairs using rods Construction in wood Structural joint glue Moment resisting joints Stressed skin floors Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 38N/mm2 Tensile Modulus: 2GPa Flex Strength: 70N/mm2 Bond Strength: 6-10N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C

Rotafix TG6 Timber Grout is a filled 3- part epoxy resin repair system specifically designed for repairing and upgrading of timber beams. The resin repair system has been used extensively in period properties to upgrade timber that has been ravaged by fire, decayed or under-specified. Rotafix TG6 is a combination of epoxies and contains especially fine graded fillers. The grout is very searching and will flow into very fine fissures and cracks. This unique formula is fire rated to 1 hour. The main uses of Rotafix TG6 Timber Grout are:- Timber Resin Repair Timber Splice Wooden joist repair Beam strengthening upgrades such as modified flitch Wall pocket beam end replacement Epoxy wood filler Timber beam compression strength upgrades Rafter feet Additional Information: Compressive Strength: >50N/mm2 Tensile Strength: 17N/mm2 Tensile Modulus: 9GPa Flex Strength: 32N/mm2 Bond Strength: 3N/mm2 Specific Gravity: 1.65 Workable for 50 minutes at 20°C

Rotafix Engineering Adhesive is a high strength structural epoxy adhesive, part of the Resiwood product range. The 2-part unfilled epoxy adhesive has a degree of flex which makes it well suited to wood engineering and timber applications. The slow setting nature of Rotafix Engineering Adhesive lends itself to working on site where time is needed to create and move joints prior to finalising the assembly. Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 40N/mm2 Tensile Modulus: 3GPa Flex Strength: 70N/mm2 Bond Strength: 6N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C Supplied with: Cartridge set Nozzle Follower plate Available Sizes: 400cc (Product code: 3560)

Rotafix Aquachem is a solvent-free coating used a membrane for tanking, waterproofing, gas barrier and as a high-performance floor coating. Rotafix Aquachem is a 2-part liquid epoxy that can be applied as a floor finish. Combining aggregates with the top coat creates a skid resistant surface. Adding flakes to the top coat will give a decorative finish. It has been used extensively in food preparation areas and medical environments as it is easy to clean, resistant to chemical cleaners and resistant to the formation of mould. Rotafix Aquachem can be used as a liquid applied damp proof membrane. The liquid membrane can be applied to prevent moisture ingress both positively and negatively. So if it is applied to the outside of a wall, water will not penetrate, equally if is applied internally then moisture penetrating the substrate will equally not penetrate. The average bond strength of Aquachem is 4N/mm2 , it would require a head of water of 600m to force the Aquachem to break away.

Pyroprotect is a Class B-s1,d0 flame retardant impregnant for exterior use. This waterborne, transparent coating helps to prevent mould, rot, mildew and fungi as well as offering class-leading fire protection. Pyroprotect is a flame retardant impregnant for wood with excellent weather resistance properties. Suitable for processing new and wood preservative-treated wooden surfaces, not suitable for surfaces treated with film-forming coatings (lacquers, paints, oils). Pyroprotect is used extensively in rail applications where timber sleepers are exposed to flammable liquids, debris and then sparks from power rails. Pyroprotect is applied at ambient temperature by brush, roller or spray applied there is no requirement for heat treatment or specialist pressure treatment. Surfaces are flame retardant 5 days post coating. Additional Information: Class B1 D0 S1 flame retardant VOC free.

Rotafix Zeroset Anchor Grout is a 2-part high strength epoxy system that is used for the fixing of metallic objects into concrete such as anchors and studs. Rotafix Zeroset Anchor Grout has been specifically designed for setting at low temperatures in smooth-walled, diamond drilled holes. This chemical anchor will displace water from a hole then cure under any residual water. This high-performance chemical anchor grout has been approved by the Department of Transport for parapets and street lighting. Additional Information: Compressive Strength: 70N/mm2 Tensile Strength: 16N/mm2 Flex Strength: 32N/mm2 Workable for 20 minutes at 20°C Available Sizes: 500cc (Product code: 3542)