Germany
Manufacturer/ Producer
Germany
The new Scout VGS 4500 measuring station consists of measuring probes mounted on the front of the vehicle and a measuring cell installed within the vehicle. These two parts are connected via a suction hose. The system can be mounted on different type of vehicles such as a pickup truck, quad or car. To adapt to nature of the surface to be measured, the probe distance can be adjusted quickly and it is just as easy to store the entire front probe. With the Scout VGS 4500 measuring station from Schütz, very large sections of network can be inspected and the results can be recorded in a short time. With the vehicle-based measuring system, measurements are accurately taken at speeds up to 50 km/h. Even under the most difficult conditions, Scout VGS 4500 has proven its reliability. The system was successfully subjected to a resistance test in the desert at an outside temperature of over 36 degrees Celsius.
Request for a quoteGermany
The GMS 4000 offers even higher accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow as well. In addition to reliable measurement results, optimal stability and constant response times are also achieved. The easiest maintenance and maximum accessability because the intelligent measuring sensors can be quickly replaced without configuration problems, if necessary. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GMS 4000 is easy and safe to use even by an inexperienced user. All that is required for commissioning is the selection of a task from the main menu, e.g. gas detection. From there the measuring device sets itself automatically according to a defined program, sensor selection, measuring range, pump output and alarm message.
Request for a quoteGermany
The GM 3100 offers even higher accuracy of results even with changing tasks, since it can be set for different measuring tasks and environments. The device monitors the intake volume flow and can adapt to the changed measuring environment, preset, monitor and the volume flow. In addition to reliable measurement results, optimal stability and constant response times are also achieved. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GM 3100 is easy and safe to use even by an inexperienced user. For commissioning, all you have to do is select a task in the main menu, for example gas detection, and the measuring device then automatically sets the sensor, measuring range, pump output and alarm message according to a defined program.
Request for a quoteGermany
The GM 5 from Schütz Messtechnik always offers the highest accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow and can then adapt to the changed measuring environment and set, monitor and adjust the volume flow. In addition to reliable measurement results, optimal stability and constant response times are achieved. The menu navigation in connection with the automatic measuring range selection makes the GM 5 easy and safe to use by any user at any time. All that is required for commissioning is the selection of a task in the main menu and the measuring device independently sets the sensor selection, measuring range, pump output and alarm message according to specified specifications.
Request for a quoteGermany
With the GPD 3000 Ex you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. o simple. Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 Ex is a professional leak detector for everyday work.
Request for a quoteGermany
With the GPD 3000 you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 is protected from dirt and mechanical stress by a metal protective cap. o simple o light o exact o rugged o 30 year guarantee o includes a free annual revision Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 is a professional leak detector for everyday work.
Request for a quoteGermany
With the GPL 3000 Ex you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 Ex is a professional leak detector for everyday work.
Request for a quoteGermany
With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 is a professional leak detector for everyday work.
Request for a quoteGermany
With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.
Request for a quoteGermany
The P-Pen 5000 Ex from Schütz is the compact measuring device for the exact determination of operating pressures up to 5 bar. simple operation, reliable measurement results, small and compact, extremely robust, with Ex Protection approval
Request for a quoteManufacturer/ Producer
Einsteinallee 5
77933 Lahr - Germany
Germany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteGermany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.