Germany
Manufacturer/ Producer
Germany
The P-Pen 1000 Ex from Schütz is the compact measuring device for the exact determination of operating pressures up to 5 bar. o simple operation o reliable measurement results o small and compact o extremely robust o with Ex Protection approval
Request for a quoteGermany
With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.
Request for a quoteGermany
Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included
Request for a quoteGermany
With the telescopic aerial probe, any gas traces that may be present can be better detected. This is particularly recommended in pedestrian zones. Due to the high suction power of the extraction system, the gas concentration in the ground is already very diluted. However gas may still be later detected - but not with the telecopic aerial probe. Depending on the requirements, the telescopic aerial probe can be clicked into place quickly.
Request for a quoteGermany
The Laser Mini offers a selective measurement of methane without interfering cross-sensitivities. The device monitors itself and is therefore almost maintenance-free. Thanks to the menu navigation in conjunction with supporting displays of the measurement history, absolute value, etc., the Laser Mini is easy and safe to use even by inexperienced users. The Laser Mini only needs to be switched on.
Request for a quoteGermany
GasMan is designed for personal surveillance tasks in harsh industrial environments. The GasMan is available for many types of gas.
Request for a quoteGermany
The GasPro gas detector can be equipped with sensors for up to five gases with ATEX approval. With the option of equipping the gas detector individually with various sensors, the GasPro gas detector is ideal for use in sewers, sewage treatment plants, landfills, ships, chemical and oil processing industries. An important unique novelty "positive safety" display. The GasPro signals the status at a glance via a three-color LED, green display = everything OK, yellow display = still OK, but a check is due soon, red display = not OK Particularly noteworthy is the loud alarm at 95 db and the optical signaling indicated by two LEDs that can be recognized from each side. The measured gas concentrations are saved every 10 seconds and stored in the internal memory. In addition, various events (switching on, alarm, calibration) are stored in the memory. The collected data can be transferred to a PC with a USB cable. A charging station with interface or a calibration station are also available.
Request for a quoteGermany
foldable carpet probe (carbon-fibre) 180mm diameter wheel. Bore-hole probe (carbon fibre). Bell-probe funnel for attachment. Telescopic aeriel probe. Instrument filter. Carry-strap. Carry-case. Charger not included. Gas detector not included
Request for a quoteGermany
Easy-to-use, mobile carpet probe with surface grille, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.
Request for a quoteGermany
Easy-to-use, mobile carpet probe with surface plate, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.
Request for a quoteManufacturer/ Producer
Einsteinallee 5
77933 Lahr - Germany
Germany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteGermany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.