The direct driven agitator SPR is Geppert Ruhrtechnik’s solution for all industrial mixing tasks that demand a turbulent mixing with high peripheral speeds. It is driven by a three-phase-motor with poles between 2 and 8 as well as drive ratings between 0.25 kW and 75.0 kW. The SPR could also be equipped with a frequency inverter upon request (up to 7.5 kW). The agitator shaft is directly connected at the shaft journal of the drive via sleeve or flange coupling. Solutions with quick-change or precisions-change coupling are also feasible for lower drive ratings of up to 3.0 kW. The standard agitator element is a propeller. Other mixing elements according to the mixing task upon request. The SPR can be mounted as a stationary unit or – at a weight of up to 25 kg – it can also be mounted directly onto the open tank via a vessel clamp Up to motor size 112, all SPR series agitators can also be provided with reinforced shaft. Type test certificate numbers for zone 0 (category 1).
Germany
Pneumatic drum mixer for highly viscous media. The FRP-HX is Geppert Ruhrtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the drums. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FRP-HX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers. Special solution for highly viscous liquids of up to 5,000 mPas. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (device group II, category 1-3).
Request for a quoteGermany
The pneumatic FRP-LX mixer series has been designed for easiest operation. Aluminum being the material of the housings and the adapters, it has a weight of only 6 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile agitator FRP-LX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers.
Request for a quoteGermany
The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.
Request for a quoteGermany
Electric drum mixer for highly viscous media. The FR-HX is Geppert Ruhrtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the tank. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FR-HX is by default equipped with an on-/off-switch with low voltage breaker and – upon request – with a connection cable. . The FR-HX could also be equipped with a frequency inverter upon request. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (Device group II, category 1-3).
Request for a quote