Sheathing thermocouple | Fibreglass | Type N |

Sheathed thermocouple


Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous

Temperature sensing devices
  • Sheathing thermocouple
  • thermocouples
  • Fibreglass

Product features

Sheathing thermocouple pairing Type N
Limiting deviation Cl. 1 as per DIN EN 60584-1: 2014-07
Sheathing material Inconel600
Measurement point hot junction insulated
Probe diameter 1.0–3.0 mm
Element length 50–1,000 mm
Adapter sleeve 5.0 x 40 mm
Conductor Fibreglass with VA braid
Conductor Strand, 2x 0.22 mm²
Wire length 500–5,000 mm
Connection Selection

Products similar to this business

Other products from this business