Thermowells are generally used where they remain in the measured medium and only the temperature sensor is to be replaced or retrofitted or the measured media must not touch the temperature sensor directly. Thermowells also provide protection against mechanical stress. Labom thermowells are manufactured according to national standards or to customer specifications. The corresponding Labom dial thermometers and temperature measuring transmitters are optimally adapted to them in metrological terms.
Germany
Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +750 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere
Request for a quoteGermany
Ex Thermostat - the Thermostat serves for limiting, monitoring or control of room temperatures, medium or surface temperatures within hazardous areas of categories 2 or 3. Type ExTR60E-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with knob, current rating 16A. Type ExTR60D-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with screw, current rating 16A. Type ExTR60D05/10/15 With fixed temperature 5 / 10 / 15°C - for simple control of the room temperature (e.g. frost protection) in explosion hazardous areas. Design with fix mounted 2m connection cable.
Request for a quoteGermany
Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.
Request for a quoteGermany
The automotive industry standard in thermal profiling of paint cure processes Silicone-free technology Multiple oven tests possible before returning to PC Process Pass/Fail at oven exit Up to 16 measurement locations in a single run Hard wired real-time data analysis from batch ovens Fully customizable and easy-to-use Insight analysis software Wide range of thermal barriers & thermocouples to suit your process needs
Request for a quoteCreate one request and get multiple quotes form verified suppliers.