The company TITAN CEMENT COMPANY S.A., is a Manufacturer/ Producer, which operates in the Cement and additives industry. It is based in Athens, Greece.
Other companies in the same industry:
COMPOSITION AND APPEARANCE
Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures.
The compound obtained is white in colour.
• Setting time : 30 to 40 minutes
• Hardening time : 1 to 2 hours.
• Second coating : after 3 hours
• Adherence : complies with NFT 30 608
All types of interior surfaces complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc.
After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste.
PREPARATION OF SURFACES
Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.
TRADE AND PRODUCTION ENTERPRISE BONUSTRADE LLC
TPE Bonustrade LLC offers to delivery, to your enterprise, carbon additive for grinding cement.
Carbon additives (Intensifiers) are organic compounds that are added during the grinding of the clinker directly into the mills. Used in the cement industry in order to reduce energy consumption, increase grinding efficiency and obtain high fineness grinding. In addition to the above, cement mobility in supply lines is improved and blockage in storage bins is prevented.
Bentonite powders HDD (ГНБ) – 30 is intended for the construction of crossings and the laying of services using HDD method.
It is produced from high-quality bentonites of Ziryanskoye (Kurgan region, Russia) and Dash-Salakhlinskoye (Azerbaijan) deposits.
Manufactured by: Kurgan Bentonite Limited.
BENEFITS OF USING OUR BENTONITES FOR HDD:
Improves drilling efficiency;
You get a good quality drilling fluid based on the water of any hardness WITHOUT any additional water and polymers treatment;
The risk of accidents is minimized;
Increases the equipment service life;
Hazard category of drilling cuttings is lowered.
Kurgan Bentonite Limited manufactures the following grades of bentonite powders PBM-18, PBM-20, PBM-22 which are used for the EPB tunneling, the construction of "slurry wall", groundwater cutoff, "thixotropic jacket" and other construction works.
SPECIAL PROPERTIES OF PBM-GRADE BENTONITE POWDERS:
Developed in accordance with recommendations of the Branch of the JSC TSNIIS R&D “Tunnels and metro” under Russian quality standards in accordance with Technical Specification 5751-001-41219638-2010;
Are a low-budget basis for flushing fluids used in construction;
FLUSHING LIQUIDS FOR CONSTRUCTION WHERE OUR BENTONITE IS USED:
Have low sand content thus reducing wear on drilling equipment.
Possesses optimal viscoplastic and filtration characteristics.
Provides effective borehole cleanout;
Have excellent penetrating and sealing properties