Results for

Distributor - Beams

50 Companies

225 Products

Product recommendations

Latvia

Sweden

Germany

Turkey

See more products

OLIVINI GROUP

Italy

OLIVINI GIUSEPPE SRL, located in Flero (Brescia), have 52 years of experience in Steel distribution.Developed on a surface of 16.000 mq, Olivini supply every day Wholesalers in Italy and abroad. Complete range of STRUCTURAL PIPE EN 10219 Square, Rectangle and Round, service of Cut and Drill Complete range of BEAM until to section 600 mm., service of Cut and Drill Welded Pipes, quality available in Stock s355 s275 s235 lenght 6/12 metri + service of Cut and Drill Commercial rolled section, quality s275. Stainless Steel also Structural profiles. Eridian srl is a subsidiary of Olivini Giuseppe srl which was established in 1975 and it is based in Flero.In addition to the marketing of very thick welded and seamless tubes and of rolled, turned and forged round steel bars up to a diameter of 800 mm, Eridian is a producer of drilled steel round bars. The drilled bar is made when tubes hot-rolled by pipe mills are not available, when the quantity does not justify its industrial production.
KERAMZYT SYSTEM. BLOCZKI FUNDAMENTOWE, PUSTAKI ŚCIENNE, BETON TOWAROWY

Poland

The company KERAMZYT SYSTEM. BLOCZKI FUNDAMENTOWE, PUSTAKI ŚCIENNE, BETON TOWAROWY, is a Multi-Category, which operates in the Concrete products and conglomerates industry. It also operates in the Poles, concrete, Concrete blocks, Flooring, prefabricated concrete, beams, Poles, concrete, Concrete blocks, and Flooring, prefabricated concrete industries. It is based in Szczecin, Poland.
AUGUST FAVEERE-DEVOS

Belgium

The company AUGUST FAVEERE-DEVOS, is a Multi-Category, which operates in the Steel & Metals industry. It also operates in the pipes, Round reinforcing bars, beams, and metal sheets industries. It is based in Waregem, Belgium.
VAN LEEUWEN BUIZEN GROEP

Belgium

The company VAN LEEUWEN BUIZEN GROEP, is a Multi-Category, which operates in the Tubular structures industry. It also operates in the merchant finished steel bars, valves, and beams industries. It is based in Vilvoorde, Belgium.
LUXMA

Belgium

The company LUXMA, is a Distributor, which operates in the Doors, house industry. It also operates in the exterior doors, and beams industries. It is based in Halen, Belgium.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

JONCKHEERE CHARPENTES

Belgium

The company JONCKHEERE CHARPENTES, is a Multi-Category, which operates in the Framework, wood industry. It also operates in the Concrete forms, Structural frame, beams, timber for structural frames, and Concrete forms industries. It is based in Colfontaine, Belgium.
STAPPERT INTRAMET SA

Belgium

For 40 years STAPPERT has been a group leader for stocks and distribution of stainless steel products. Our range of 15, 000 articles includes: Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

All the products for "beams"

T-beam, hot produced resp. welded, heat treated, pickled,

T-beam, hot produced resp. welded, heat treated, pickled,

T-beam, hot produced resp. welded, heat treated, pickled,

T-beam, hot produced resp. welded, heat treated, pickled,

T-beam, hot produced resp. welded, heat treated, pickled,

Website See all products
RACK CONCEPT

Belgium

RACK CONCEPT is a company based in Belgium that has specialized in shelving for over 20 years. We principally carry second-hand storage, warehousing and shelving systems for warehouses, shops, offices, etc. Our range includes shelving for heavy loads, semi-heavy or light loads, for long loads, platforms or mezzanines and even industrial up-and-over doors, complemented by accessoiries such as floor grids, meshed partition walls, guardrails and metal pallets. Our stock includes shelving made by the main European storage system manufacturers such as FERALCO, MECALUX, STOW, DUWIC, SSI CHAEFFER, REDIRACK, POLYPAL, and AR RACKING. We work closely with the second-hand shelving sector leaders for sales of second-hand shelving. We operate in Belgium and also in France, Luxembourg and the Netherlands. Our mobility is one of our assets, in addition to our responsiveness. What is more, we undertake to deliver within the agreed timescale. That is how we have gained the trust of customers like SNCB, Interlogistics, Intertrans, Carrefour, Options, Carlam. Feel free to contact us for more details!

All the products for "beams"

Decking sleepers

Website See all products
ZEMO VERTRIEBS GMBH

Germany

Our highly experienced torque specialists focus on controlled screw tightening as an area of expertise. Besides high-quality screw systems for industrial manufacturing, we also supply reliable pneumatic tools for maintenance and repair work (within the automotive segment). We can also create individual special purpose tools according to design for particular screw tightening situations. In addition, we can provide on-site training for your operators. Last but not least, we can service, calibrate and (if needed) repair torque equipment and pneumatic tools in our in-house workshop.

All the products for "beams"

Direct Reading Flat Beam Torque Wrench 'M'

Website See all products
TECHNIC MACHINES

Turkey

Technic Machine is a Turkish company founded in 2012 and specializing in Machine Supply. We exported our machines to more than 70 countries until today. We are your industrial machine solution partner on your machine research ! Our company works on metal working machines and plastic processing machines. Such as for metal working machines coil cut to length machine line, coil slitting line, roll forming machine lines, coil and press feeding machine systems, NC or CNC pipe bending machines, coil fed laser machine, sandwich panel production line and etc. As plastic processing machines we deal with plastic extruder machines, plastic recycling machines, injection molding machines, thermoforming machines, plastic bag production machines and etc.. We are finding the optimum results for our customers from the Turkish machine suppliers, finishing contract negotiations and sales, following shipment and other process. Consulting to our customers about their purchase from Turkish market.

Website See all products

WOOD IS GOOD LTD.

Latvia

Wood is Good is company with more than 10 years of experience in the production and export of kiln dried firewood. Thanks to our experience and knowledge, we will always offer you quality products (FSC certified) and professional service (including private branding and possibility to add labels according to your design). We offer delivery services to any address you provide. We also have favorable payment terms as we offer post-payment for 30-90 days. Our main products: Hardwood firewood - produced according to customers specifications in length from 22 to 30 cm, dried to a maximum of 20% moisture and packed in net bags, plastic bags and boxes. Available species are birch, alder, ash, oak. Softwood kindling - possible length from 13.5 to 19 cm, kiln dried with maximum moisture content 12% and any packaging available in different sizes (net and plastic bags, boxes, crates...). Kindling is produced from softwood – pine and spruce. Bonfire Swedish torch - three diferent diametars available, height 18 cm, length of burning depends on diametar and can be from 1.5 to 3 hours. Produced from birch, suitable either indoors in the fireplace or outdoors in nature. Sawn timber - produced in pine and spruce. Pine has superior drying, precise dimensions and grading. Spruce is stronger than fast-growing wood and thus is suitable for the load-bearing structures in a wide range of buildings. Due to its dense grain, our sawn goods have excellent moisture and thermotechnical properties

All the products for "beams"

Pine timber

Website See all products
HIERROS Y TUBOS LORCA SL

Spain

We are Hierros y Tubos Lorca S.L, a company specialised in sales and the distribution of steel-working equipment at our Humanes de Madrid store, opened in 1988 and from where we carry out our sales activity by increasing our business, infrastructures and storage units to provide our customers with a quality service.

Website

Product recommendations

Belgium

Germany

Germany

Germany

See more products

REPRESENTACIONES ÁNGEL LÓPEZ SL

Spain

Our family-run business is devoted to wood. More than 20 years' experience in the sector. We have top quality wood and provide the following items: glulam and solid wood beams, covered parquets, sprung floors, outdoor panels and flooring, and much, much more.Our large catalogue of wooden products which we make available and the training of our technical experts are the keys to our success.

Website
MONTAGNOLI EVIO

Italy

Since 1921 Montagnoli has been producing timber for works and carpentry, even on a large scale, and also providing its customers with numerous services. Engineered wood is also available for covers in the construction field. We make wooden items and structures for construction, covers for the domestic, industrial and religious context and for sports facilities and lofts, in solid wood or combinations with cement, and prefabricated constructions.

Website
SELMACH MACHINERY LTD

United Kingdom

Selmach's brands date back to the 1800s. As experts in producing engineering machinery, we've got 100s of years of experience in producing high-quality, accurate engineering machinery to suit your requirements. Whether it's for bending, folding, cutting, shearing, drilling or sawing, our product range has you well covered. Machinery capable of cutting a variety of metals, including mild steel, stainless steel, aluminium, brass, copper and beyond. We ensure all of our quality machines are backed up by an equally effective service team. Our team of engineers are available for installation, commissioning, servicing and repairs, ensuring your workshops are in top condition at all times. Speak to us about your machinery requirements, as beyond our standard product range, we can also secure specialist machinery and one-off products as required for your unique requirements.

All the products for "beams"

Morgan Rushworth BHGS Hydraulic Swing Beam Guillotine

Morgan Rushworth HSGS NC Swing Beam Guillotine 415V

Ocean Avenger CNC Drill Line Beam

See all products
VEDARD SECURITY ALARMS

China

China manufacturer and supplier of security alarm systems, security device, fire alarm, burglar alarm, intruder alarm, perimeter protection, PIR detector, motion detection, gas sensor, smoke sensor, door contact, wireless alarms, home alarms, home security equipment, alarm panel, alarm controls, alarm console, business security, wireless siren, ademco alarm, auto alarm, GSM alarm, pstn alarm, networking alarm, smart telephone alarm, office security device, security system, security alarm kit, professional alarm, smart alarm, alarms. Online shop and low price wholesale are available for worldwide buying. Technical supports for our security alarm systems are provided for all life time.We cooperate with Security Service, Alarm Installer, Security Engineer etc. by providing requested security solution for security project and complete security systems.Welcome to Visit our web at http: //www.vedard.com and contact us.

All the products for "beams"

Solar wireless security alarm system anti-theft

Garden security solar wireless alarm with LED lamp

Fire Detection Smoke beam reflected smoke detector

See all products
PAULY STAHLHANDEL RALPH PAULY E.K.

Germany

Your specialist for any needs! For over 25 years, Pauly STAHLHANDEL has worked in the retail, storage and processing of steel, non-ferrous metal and special material products, as well as related products. The family company, which is now managed in its third generation, focuses on the area of steel and related materials. Thanks to our market knowledge gained from our national and international contacts, we are able to procure unusual materials and uncommon sizes at competitive prices and by your deadlines. Among other areas, this applies to the automotive industry, mechanical engineering, the food and aviation industries, as well as steel, gear wheel, valve and gear construction. We are a competent partner with the technical and staff capabilities to meet the objectives of challenging tasks and give you a significant competitive advantage.

All the products for "beams"

1.0596 – S 355 K2 +AR – Profile/Beams – IPN 280 x 2050

1.0038 – RSt 37-2 – U-Profil / U-Beams – U 240 x 140 mm

See all products
VISION X EUROPE

Belgium

Created in 1997, Vision X is devoted to revolutionising the lighting equipment industry. Vision X Europe, based in Belgium, was created in 2011 to reinforce our position and ensure the brand continues to develop across the continent! Every day, new customers and partners join us, placing their trust in us and enabling us to manufacture all types of machines equipped for the next generation of our LED lighting. Vision X Lighting is one of the leading suppliers of lighting solutions for all types of static equipment and vehicles. We have worked with prestigious companies such as NASA, the US armed forces, and other major, globally renowned manufacturers of machines; from mining to agriculture, from the sea to the forests, and, last but not least, on our roads to support the public sector.

All the products for "beams"

Xmitter Prime Race Spot Beam

See all products
KBC DIFFUSION

France

Specialist in sale of construction equipment. We provide a wide range of horizontal and vertical formwork, as well as shoring towers and worksite electricity supply cabinets. You will find high-tech equipment which satisfies both current safety requirements and your technical needs. You will feel the benefits of our specialist expertise, personal advice and an optimised supply chain and supplier network.

All the products for "beams"

H20 timber beams

See all products
GUANGZHOU JR LIGHTING EQUIPMENT CO.,LTD

China

Guangzhou JR Lighting, a professional manufacturer of Stage lighting, including LED PAR Light, LED BAR Light, Matrix Audience Blinder, Moving Head Light, Mirror Ball, Theatre Projector, Effect Machine, City Color, Sky Light, Controller, Accessories, etc. From the first day we set up the company, we focused on the business of entertainment Lighting, in the past years, we provided the market with professional moving head, we begin to provide the architectural lighting including LED products.We bear in mind from the first date that our goal is to play as an important role in the international lighting market. We always specialize in technology innovation and idea creativity. Thanks to the efforts of all our staffs as well as the supports from our close cooperation customers , we have the opportunity to grow up stronger and stronger. Hope you can join us to welcome the bright future of JR Lighting.OUR VISION & MISSION & SERVICE: VISIONOur vision is to create an exiting new way of lighting easy to

AKDAS BETON KALIP

Turkey

Akdaş Beton Kalıpları is a manufacturer of all types of concrete molds. The company is founded in1992 in Konya -heart of Turkey, the 4the biggest industrial zone inTurkey. We can produce differant types of molds like garden wall molds with differant patterns; minrate molds and building group whatever the biggest of your project or whatever the art work you needed or precise that required because we believe in our capacity to reply to our customers demands. We can produce column moulds with differant sizes for differant purposes, also balcony moulds with differant shapes, fundimantales of buildings, stairs molds, manhole moulds, median moulds, elevation mould. Mould feed, grave mould, dam tunal phrases, road construction mould like refuge mould or tunnel mould.
HALIVES S.A. STEEL HOLLOW PRODUCTS

Greece

The company HALIVES S.A. S.A. since 1950 trades iron and metal steel products in Greece. The privately owned facilities of 8.5 acres with 2400 m² coverage since 1994 is a primary location and particularly advantageous due to the short distance of 500 meters from the National road of Thessaloniki - Athens and 1.500 km. from the port of Thessaloniki. The company employs 20 permanent staff and a has turnover of more than 6.500.000 euro. Our products include Hollow sections, Hot rolled plates, Hollow Rectangular Beams, Round hollow section pipes, Beams: UPN, IPN, IPE, HEA, HEB, Merchant Bars: Flat, Square, Round, Angle, Tee, narrow beams IPN, plates and hot rolled strips, Corrugated Sheets, Coils, Strips Sheets and plates, welded sections, welded hollow sections, black round pipes, black and decape metal sheets Sheets and strips, steel, hot rolled Bars, steel and rolled steel Sheets and strips, steel, cold rolled Iron and steel wire rod. Drawn steel wire, reinforcing steel Semi-manufactured products, aluminium and its alloys Semi-manufactured products, magnesium and its alloys Pipes, tubes, ducts and pipelines, ferrous metals Pipes and tubes, non-ferrous metals Pipes and tubes, non-ferrous metals, by use Wholesale trade
OTEP

France

OTEP SA and AMAS France are 2 companies specialised in technology and materials for the pre-stressed concrete industry. OTEP is renowned for its great expertise and knowledge in technology for pre-stressed concrete products. The company makes plants for the production of pre-stressed concrete products: girders, precast slabs, beams and structural components, waffle slabs, street lighting columns, electricity poles (D, E, VHV, etc.), services ranging from feasibility studies, installation and "turnkey" or bespoke commissioning to staff training, technical support and after-sales services. OTEP technology and materials make for cost-effective production of optimised pre-stressed products that are reliable and sustainable made using high-performance concrete that complies with international standards. AMAS has been at your service since 1972, production workshop and special equipment maintenance.
SOUTH WEST STEEL SUPPLIES

United Kingdom

By way of introduction, we are a Steel Stockholder based in Portishead, Bristol. South West steel Supplies was established in 2001 & incorporated in November 2005. We operate from a 4000 Sqm2 site & are fully UKCA/CE and BSEN1090 accredited. We carry an extensive range of standard steel supplies and provide cutting service to your requirement. We can also offer non-stock items at competitive prices with a quick turnaround. South West Steel supplies offer a professional and prompt delivery service with our own fleet of 6 trucks that deliver to the southwest of the country. South West Steel Supplies Ltd also provide tubes, fittings & flanges as well as consumables, specialist welding equipment and industrial power tools. For the best steel stockholders in Bristol and the South West, look no further! We are committed to ensuring every customer receives the best service possible when choosing to purchase steel with us. With a highly skilled and knowledgeable team, you can trust us to provide the best quality steel on the market. We have been working within the steel industry for many years and have supplied materials for both domestic and commercial projects, so be rest assured you will be satisfied by the top quality steel we have to offer.Variety of Steel StockOur stock of steel is massively varied and we are confident that you will always be able to find the perfect material for your project.
SATURN ELECTRONICS CORPORATION

United States

Saturn Electronics Corporation is Quality Electronic Manufacturing CompanyWe attribute this growth to growing customer satisfaction, a growing referral base, and the overall increase in the use of electronics in manufacturing. Along the way however, Saturn’s management never forgot the original focus on quality. As a result, Saturn achieved its ISO9002 certification in 1985. In 1998, Saturn became the 5th PCB manufacturer in the country to achieve QS9000 certification. With industry-recognized certifications under our belt, we turned our focus towards strict, customer-specific certifications. Between 1998 and 2000 after investing approximately $3 million towards quality and capacity improvements we were certified for high-reliability, safety, and under-hood applications.
ENERGY SCIENCES INC.

United States

Energy Sciences' Flexo Inks and EB machinery are the gold standards in safety. EB processing is extremely precise and can be controlled to provide the exact cure desired. This is done through computerized systems that control the dose and penetrate depth of electron. Here at ESI, we provide B2B companies with the machinery and supplies needed to carry out these particular functions.
PRATLEY'S BUILDERS BEAMS

United Kingdom

Pratley and Sons Ltd is a family run business established in 1989 which offers a range of services for all your steel needs. Efficient and friendly service supplying beams and columns to fabrication and larger structural steel projects. We deliver up to 80 miles radius from our yard based in RG30 3NX. Will can go further but this will be POA as we use a carrier service. Delivery costs are as per web site.
OCHOA-LÁCAR, HNOS.

Spain

The company OCHOA-LÁCAR, HNOS., is a Distributor, which operates in the Rolled sheets - non-ferrous metal industry. It also operates in the Steel & Metals, Steel & Metals, steel beams, steel tubes, and steel plates industries. It is based in Pamplona, Spain.
PROVINORTE SAC

Peru

The company PROVINORTE SAC, is a Distributor, which operates in the Construction, industrial - contractors industry. It also operates in the laminated beams, and steel profiles industries. It is based in Lima, Peru.
NEGOCE+

France

The company NEGOCE+, is a Distributor, which operates in the Sections - ferrous metal industry. It also operates in the i-beams, steel joints and parts, aluminium sheets, and gratings industries. It is based in Tancarville, France.