steel strips Germany

...This material group comprises C-steel with low carbon content, good formability and fineblanking quality. Due to case hardening, the components have low-wear surface layers with high hardness and sufficient toughness in the core. They thus combine numerous properties and application possibilities in a wide variety of industries. To increase the wear resistance, you can also carburize or carbonitrate partial areas. C 10 E, C 15 E /➔ according to DIN EN 10132 - 2 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

...Gravel retention strip 120 / 75 mm: Material: 1.5 mm aluminum (AlMg3) or 1 mm stainless steel (1.4301) Support leg: 120 mm / Height 75 mm Lengths: 2000 mm Drainage holes 6.5 x 30 mm, spacing 60 mm Cutout in the support leg 60x78 mm every 200 mm as an adhesive surface. Gravel retention strips with drainage holes provide a secure and clean boundary between the gutter and the loose substrate on balconies, terraces, or roof terraces. They ensure reliable water drainage. This keeps your green roof where it belongs - on the roof.

...The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips...

...Solid Beech Tabletop: - Glued laminated panels made from individual solid wood strips - Colors: Oiled beech, lacquered beech, or stained in walnut or wenge - Anti-warping rails included on the underside - Hygienically safe for contact with food High-quality RICHMOND pedestal table frame for bistro tables: - Steel, powder-coated or stainless steel - Square variant: Square column 80 x 80 mm...

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

...Stainless steel, titanium, tungsten, molybdenum, bronze, nickel silver, etc.

...We exclusively galvanize on frames. The process is primarily used for high-quality and demanding surfaces such as decorative strips, fittings, or profiles. Through the three-dimensional movement of parts in the galvanizing bath, we can ensure an optimal coating result. For simpler items, we have standard frames, and for more complex parts, we can have frames made for our galvanizing in a timely manner.

...RUBI Steel Bollard with Metal Cap Upper part with applied red and white reflective foil. Fastening material included. Mounting Info: tiltable with base plate Mounting Type: for surface mounting Total Height: 900 mm Height Above Ground: 900 mm Drive-Over Height: 90 mm Bollard Dimensions: Ø 76 mm Weight: 8 kg Surface: hot-dip galvanized, galvanized Locking: triangular lock Cap: with flat head Material of Cap: Metal Number of Reflective Strips: 2 tiltable: yes Number of Keys: 1 piece...

...RACK WITH CONTINUOUSLY ADJUSTABLE 19" FRAME Screwed construction based on horizontal aluminum profiles and vertical steel beams. Standard racks are placed on leveling feet. Use of various network cabinet accessory elements is possible - wheels, device shelves, drawers, connection strips, etc.

...Belt width: 500-1800 mm Recommended speed: max. 3.0 m/s Quick and simple exchange of wear parts Blade material: polyurethane + hard metal / stainless steel / ceramic ...

...Floor profile strips must be scratch-resistant and easy to clean. Our colored enamel strips can be additionally equipped with glow-in-the-dark enamel stripes if needed. Complicated profiles made of aluminum can be produced cost-effectively through extrusion.

... accessories, functionality can be further optimized. This allows us to achieve the best possible results even in properties with complicated architectural requirements. Special shapes, slopes, and cutouts: aluminum profile mats can be individually tailored to any location. Entrance areas that do not have a rectangular floor recess are therefore not a problem. Further possibilities: solutions for floor profiles, engraved stainless steel profiles for entrance mats, accessibility in public buildings, cover strips for entrance mats with revolving doors, dirt-catching trays for high...

...T30 Brand and Smoke Protection Doors • Single and double-leaf solid doors optionally with F30 vision panel. • Leaf widths single-leaf up to 130 cm; double-leaf up to 249 cm. • Leaf heights up to 249 cm, with top panel up to 350 cm. • Suitable for wooden frames, block and flush frames, steel frames. • Custom wood selection or opaque colored coating. • Surface applications such as decorative strips, panel fillings. • Various wall connections. • Sound insulation requirements up to 42 dB. • Test certificate License Hoba Z-6.20-1962...

...Accessories for fences and gates, clamps, mounting brackets, angles, sheets, clamp brackets, connectors, caps, post caps, clips, demolition nuts, wall strips, connection strips Mounting brackets for SUPREME fence panels (Set of 4) Mounting brackets for design steel fence panels. Each mounting bracket includes 2 self-tapping screws, one M8 screw, and covers. 4 mounting points are required per fence panel. Replacement accessories – the mounting brackets are included free of charge with an order of fence panels or posts. This is replacement accessories for subsequent ordering.

... technology, we manufacture everything from simple one-sided machining on conventional milling machines to fully synchronized freeform shapes on 5-axis milling centers. The following are utilized: • Conventional tool milling machines • 3-5 axis machining centers • Fully automated special systems • Cycle machines Product examples: Front panels, housings, holders, frames, joints, connectors, covers, strips, base plates, lamp bodies, weight plates, heat sinks, couplings, cross beams, locking levers, corner hinges, etc.

...Affordable metal squeegee for light use. The working strip consists of two 8mm microcell strips. Sizes: 45 / 60 cm Colors: Rubber = dark gray Material: Squeegee body / handle holder = cadmium-coated steel sheet Working strip = microcell (2 x 8mm, PU foam)...

... one hand, we differentiate between manufacturing from discs, and on the other hand, we produce rings with a diameter of approximately 500 mm from laser-cut sheet strips or from slit bands. These are rounded on a three-roll bending machine and subsequently welded on a special burn-off stump welding machine.

...Strips can be custom cut to the width you need. For carbon steels and brass, the desired width is available up to 300 mm. Stainless steel strips are generally available up to 300 mm, and in material 1.4310, new production can also provide widths up to 600 mm with a thickness of up to 1.00 mm. Deburred or rounded edges are available for an additional charge. The minimum length is 50 meters, and for thicknesses over 0.80 mm, shorter lengths are also available.

...Whether for rolled metal strips with unique dimensions or for metal coils: Our sleeves for metal meet all your requirements. Whether aluminum strips, steel sheets, or other metals: Heavy products require particularly sturdy sleeves. To ensure that your winding material receives the appropriate sleeve and withstands any load, we at Paul & Co have developed metal sleeves in collaboration with you...

... thicknesses of 15.0 or 20.0 mm. 3. Absorption Profiles The absorbers, bent from seawater-resistant aluminum with a high perforation ratio, are invisibly attached to the frame parts using stainless steel springs. The internal mineral fiber strips with a raw density of 100 kg/m³ are fully laminated with glass fleece. This achieves a sound absorption of 4 dB. 4. Design All aluminum materials can be color-customized and can be used in combination with other noise protection elements made of concrete, wood, or aluminum.

... profile itself. To prevent the screw spiral from scraping directly on the trough or tube floor, either special wear protection strips or complete linings are used. Conveyors without a support tube are used for transporting coarse, bulky, clogging, adhesive, bridging, or muddy products. We offer plastic linings or replaceable wear strips for spiral conveyors. The plastic lining serves, among other things, to improve sliding properties. Design (Material): Normal steel or high-quality stainless steel Length: up to 20 m Diameter: 100 to 700 mm...

.../stamping strips Aluminum alloys Copper and copper alloys such as brass, bronze Special materials like Hastelloy In the subsequent compound tool, additional processes such as thread cutting or thread forming can be integrated. Depending on your needs, we deliver as bulk goods, finished, in trays, as stamping grids, or in stamping strips, as well as specific packaging solutions. Post-treatment of the products is also possible, including degreasing, vibratory finishing, tumbling, ultrasonic cleaning, brushing, electroplating/treatment, KTL coating, laser marking, etc.

...Double Puller Systems - Automatic pressing possible (distance to counterhold approx. 1m) - With active tensile force measurement - With active pneumatic chain tensioning - Vulkolan rollers for vibration damping in the puller path - Contactless puller jaw monitoring - Omega drive principle to reduce friction in the puller path - No hydraulic components installed – everything is electric - Single puller emergency operation possible - Rear position for maintenance and repair work with additional function control panel - Package formation of clamping strips possible...

...Component manufacturing for building services, construction and industrial technology, conveyor technology, pharmaceutical technology. Complete manufacturing and component processing on a contract basis. TIG welding and traditional stainless steel processing. Stainless steel component manufacturing: Building services - floor drains, towel holders Entrance doors - decorative elements, connectors, tread plates Rail vehicles - grab poles, decorative strips, bumpers Construction - bollards, supports, structures, planters Architecture - facade components, table frames,...

...Anti-slip coating with high adaptability and extra strong slip resistance. The back is coated with a self-adhesive, flexible aluminum foil that permanently conforms to the structure of the substrate. Ideal for metallic surfaces, such as steel, stainless steel, or aluminum checker plate/diamond plate. The shape adjustment is done with a standard rubber mallet. Key data: 150 x 610 mm (W x L) black self-adhesive very durable and long-lasting rounded corners...

... connectors required). Electrification: Cable channel: Metal black 9005 powder-coated. Cover flap: Perforated metal, powder-coated according to color chart or 6018 yellow-green, 1016 yellow, or 5009 azure blue. Possibility to attach data and power strips to the underside of each cover flap. Accessories: Insert for flower trough/drink holder: Plastic black. Surface and frame colors download (0.6 MB) Conference table Pulse also available with T-foot (below).

...Excellent penetration properties due to special spoon shape Construction Features Deep profile allows for high capacity with minimal distance from the spoon pivot point to the tooth tip, resulting in high breakout force. Outstanding filling and emptying properties Wear-resistant quality steel Blades made of HB 400 or higher Wear strips on the back of the spoon...

...Idea and Design Idea and Design Development Precision drawings and measurements as the basis for production. Development Raw Material Various types of aluminum strips in different widths and thicknesses. Raw Material Production Introduction of the aluminum strip for stamping Stamping tools Finished grid profile with stamping Production Final Product Ceiling grids for different spaces Final Product...

... rigid circuit board. This circuit board can also accommodate additional components. Combination of the foil keyboard with carrier, housing, display, or other components: - Carrier made of aluminum, steel, or plastic - Housing in metal or plastic, standard or custom design - TFT displays - Touchscreen - Control elements, e.g., emergency stop, joystick, etc.

... front of the window opening or fitted precisely into the window reveal. For surface-mounted installation, we recommend the Pointum glass holders made of stainless steel. For flush-mounted installation, clamping strips or glass clamps are suitable for mounting.