Results for

Industrial batteries - Germany

36 Companies

61 Products

Product recommendations

Industrial kitchen sink faucet with water filter | 11-endf200

Turkey

Lavella industrial kitchen sink faucet | 11-end200

Turkey

Italy

See more products

HOPPECKE BATTERIEN GMBH & CO. KG

Germany

We make electrical energy available for anyone, anywhere." That is the vision that drives us forward every day. Because we firmly believe that the availability and safeguarding of electricity are among the most important social requirements and a key challenge of our time. We therefore help meet the needs of the economy and society as a whole by ensuring the availability of electrical energy. In this world where everything is powered by electricity, HOPPECKE is your partner and expert for reliable and long-lasting energy storage solutions, to drive industrial trucks and railway vehicles, to safeguard electrical systems in trains, for power backups and emergency energy supplies for UPS systems as well as IT and telecommunications systems, and for the intermediate storage of wind and solar energy in off-grid and on-grid applications. Our portfolio includes batteries and cells, charging technologies, monitoring, battery change and complete energy systems, turnkey battery charging stations and service solutions. We have incorporated all relevant, tried-and-tested storage technologies into our portfolio: lead-acid, nickel-cadmium and lithium-ion technologies. Since it was founded in 1927, HOPPECKE has been owned by the Zoellner family. At present Dr. Marc Zoellner is the fourth generation of the family to manage the industrial company. Today, HOPPECKE is the largest family-owned manufacturer of industrial batteries in Europe.

All the products for "industrial batteries"

trak | uplift air

Website See all products
FRIWO GERÄTEBAU GMBH

Germany

FRIWO, a subsidiary of FRIWO AG, listed in the General Standard, is an international manufacturer of technically leading chargers, battery packs, power supply units and LED drivers. With its solutions, the company supplies demanding customers from future-oriented industries such as electromobility, medical technology, industrial automation or battery-operated tools. In addition, the company acts as a system provider and supplies digitally controllable drive solutions from a single source. The product range includes all components required for a modern electric drive train: From the display and engine control to the battery, charger and control software.

All the products for "industrial batteries"

Li-ion battery - 10SxP

See all products
SMI HANDLING SYSTEME GMBH

Germany

SMI Handling Systeme is a medium-sized family business with more than 35 years of experience in the distribution of vacuum lifters and handling equipment. The headquarters of the internationally active company is in Wetter (Ruhr) in North Rhine-Westphalia. The company currently employs 22 people here. SMI is supported in sales throughout Germany by 5 representatives and abroad by independent partners. SMI specialises in developing solutions for handling goods. The main focus is on vacuum lifting technology. Under the brands smilift and smigrip, SMI has complete product ranges and special devices for the transport of loads from small to heavy duty. After more than 35 years of activity in the international market, our customers can be found in almost all business fields of industry and trade. Due to the different industry coverage, we additionally offer our products in stainless steel design as well as for Ex-areas. In addition to "standard products" such as sacks, boxes, buckets, barrels and canisters, we also design special solutions for handling e.g. cheese and butter blocks, EURO pallets and industrial pallets, rubber bales, batteries, coils and spools, car roofs, discs, cans, rims (aluminium rims, steel rims) or various plates.

See all products
REUTTER GMBH

Germany

REUTTER/ITIB is a modern company firmly established in Europe and six locations worldwide. Innovative solutions have made us one of the leading companies in our industry. Our key area of operations is in developing and producing assemblies which are mostly made of plastic using injection moulding, extrusion and blow moulding. The manufactured components are then refined by means of fitting and test processes. The Reutter/ITIB Group develops and produces the following components and systems for the global automotive, truck, agricultural machinery and construction machinery industry: - Battery vent/burst valves - Cooling agent/radiator caps - Cooling agent pipes/cooling agent pipe systems - AdBlue/SCR caps - AdBlue/SCR filling systems - Oil caps - Vent valves for other applications - Diesel and AdBlue truck tank caps and fillers - Air ducts. The Reutter/ITIB Group also develops and produces components and systems for the household goods and building industry, as well as for medical applications. This includes: - Supply and drain hoses for dishwashers - Supply and drain hoses for washing machines - Pipe assemblies for refrigerators - Pipe assemblies for tumble dryers - Pipes for aeration of residential and industrial buildings - Pipes for exhaust systems for residential and industrial buildings - Pipes for domestic and industrial vacuums - Pipes for colon cleansing - Valves for household applications
ATV ELMER GRONAU GMBH

Germany

ATV Elmer Gronau GmbH is based in Gronau (Westphalia) on the border between Germany and the Netherlands. We have a comprehensive and consistently growing stock and supply range which includes more than 500, 000 items. It is our intention to redefine the market requirements of the future. Market observations have shown that fast delivery, flexible goods procurement and a high level of quality are going to be of great significance in future. Expert consultation from appropriately trained personnel is a service which goes above and beyond at our company. It is our aspiration to provide a complete and well-rounded range to each company. Our customers from all over the world include exporters, importers, vehicle component wholesalers and retailers, vehicle manufacturers, transport companies, workshops, construction companies, industrial operations, administrative bodies and public authorities.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ELECTRONICX GMBH

Germany

We specialise in selling batteries, lights and seat heaters for cars. We also offer parking assistance systems, tyre pressure and parking sensors, and multimedia items.

Website
ETERNITY TECHNOLOGIES MANUFACTURING (GERMANY) GMBH

Germany

The company Eternity Technologies Manufacturing (Germany) GmbH based in Wernigerode. The company belongs to the international Eternity Technologies FZ-LLC, based in Ras Al Khaimah in the United Arab Emirates. Production uses state-of-the-art manufacturing facilities in Europe and the USA, which provide the capacity for high-volume production. This puts us among the five biggest battery manufacturers. With its headquarters in the United Arab Emirates, a country with a dynamic and vibrant economy, Eternity Technologies has built a modern production site in which the newest designs and manufacturing processes are put to use. With sales activities in more than 100 countries worldwide, Eternity Technologies is a successful global provider on the industrial market. Business partners have been established in Germany, Great Britain, Canada, South Africa, Chile, Spain and India in order to support regional sales.

Website See all products
WIFERION - A PULS BRAND

Germany

Wiferion is a pioneer and technology leader in the wireless power supply of mobile robots (AGVs/AMRs) and forklifts. The inductive charging systems of the etaLINK family eliminate unnecessary machine downtimes and sustainably increase fleet efficiency by up to 32%. As an independent business unit based in Freiburg, Wiferion has been part of PULS GmbH since 2023. With the acquisition by the market leader in DIN rail power supplies, Wiferion is ushering in the next phase of global scaling. There are significant synergies between the two companies, benefiting Wiferion's customers. The PULS Group, with its 1, 700 employees, has its own modern production facilities in the Czech Republic, China, and Germany, a global sales network, and longstanding customers in the fields of intralogistics and manufacturing. New products can be developed even more quickly thanks to the over 100-strong PULS development team. Furthermore, customers benefit from improved application support and service.

All the products for "industrial batteries"

etaTRAY

etaLINK 3000

etaSTORE LTO- Lithium Titanate Battery

etaSTORE LFP

See all products
ANSMANN AG

Germany

ANSMANN stands for quality and safety. To keep it that way, we rely on process-oriented quality management. Our claim is the daily work according to the strict rules of ISO 9001: 2015 – worldwide and without compromise. The strong will to constantly improve, combined with our passion to produce great products of the highest quality, is the basis for our well-functioning standards. For special industries, specific requirements are also integrated into our processes. A good example of this is our ISO 13485 (Medical) certification, which we achieved in 2017. Our energy specialists deal with all aspects of mobile energy in two business units. Experienced engineers develop customised solutions for mobile power supply for the Industrial division. Our extensive product range for consumers includes rechargeable batteries, batteries, chargers and torches.

Website See all products
BATTERIE TECHNIK VRI GMBH

Germany

Energy performs our life! Whether in medical technology, professional industrial applications, power tools, e-mobility, robotics or even aerospace – the areas of application for autonomous and mobile sources of energy are almost limitless, and an essential part of current and future product developments. Application-specific design and engineering, in addition to project-specific and product-specific implementation, are essential success factors in developing high-quality products and solutions. At VRI, we support you with this at all points of the product lifecycle. From design and development right through to production and service. When it comes to the development and production of customised solutions or the adaptation of our flexible and certified systems – we are your partner in the field of intelligent battery systems, because your success is our passion. This is what we have been doing for over 25 years.

Website

OMNITRON GRIESE GMBH

Germany

High technology and tradition? To us, this is not a contradiction. OMNITRON has established itself as the number one component partner over more than three decades. We offer individual solutions to complex tasks surrounding the electricity supply of mobile devices and digital radio relay technology. all from one provider. Anyone who has been in the business this long has a wealth of experience unmatched in these fast-moving industries. High quality materials and primary products, as well as our rechargeable battery production "Made in Germany", secures a consistently high level of quality. Our service concept ensures that we actively support our customers even after they buy our products. The integration of new technologies for the further development of product demands is as important here as securing the continuous reliability of our installed systems.

Website
SITEC INDUSTRIETECHNOLOGIE GMBH

Germany

As a system partner we develop, manufacture and supply customer-specific production technology worldwide as original equipment manufacturer. Our trademark includes flexible assembly systems, laser systems and systems for electrochemical metal processing for the automotive industry, electrical engineering/electronics, medical technology and alternative energy technology. For years, SITEC systems for the automotive industry have been used to fully automatically assemble and laser process high-pressure pumps, water pumps, oil pumps, shift forks, steering systems, camshaft adjusters, stators/inverters, piston rods and components for battery systems and fuel cells such as cell connectors, battery terminals or bipolar plates. In the field of medical technology, industry-compliant systems for the assembly and, in particular, laser micromachining of membranes, implants and surgical instruments are developed and built. In parallel to mechanical and plant engineering we have been producing assemblies and components for customers in the automotive industry in certified quality according to IATF 16949 for many years. Synergy effects result from our technological competence and tailor-made mechanical and plant engineering.

Website See all products

Product recommendations

China

Germany

Advice on the choice of batteries for the marine industry

France

China

See more products

CONDUCTIX-WAMPFLER GMBH

Germany

The core activity of Conductix-Wampfler is the development, production, installation and servicing of systems providing a tailor-made solution for power and data transmission to mobile equipment and machinery. In addition to its undisputed industry expertise, the company is characterised by its technical competence and innovative strength: All energy and data transmission technologies in common use today, such as cable trolley systems, conductor rails, spring cable reels, motorised cable reels, slip ring elements, through contactless energy supplies, battery charging solutions and battery management systems to safety radio remote controls and mobile controls are brought together under one roof. For customers, this means product-neutral advice and optimum technical implementation of numerous applications in the fields of industry, event technology and passenger transport, all from a single source.

Website
DIGEL STICKTECH GMBH U. CO KG

Germany

Digel-Sticktech GmbH & Co. KG was founded in 2006 in the Swabia region Germany, and has dedicated itself to innovation and fulfilling customer requirements ever since. We solve our customers' problems and apply our technical expertise to deliver not only high-quality products but also competitive benefits. In 2010, we doubled the size of our production facility and just two years later we extended it by another 3, 000 m² by building a new 3-storey hall. We stand out from the crowd thanks to our industry expertise in the following areas: – tailored fibre placement (TFP) – heating elements for the automotive industry (seat heaters, steering wheel heaters, interior heating elements, battery heaters, roof liner heating elements and textiles as well as flexible heating elements all around the vehicle) – modern infrared heaters and infrared heating elements – smart textiles, e-textiles – carbon-fibre-reinforced plastics (CFRP) – fibre composite products – vehicle parts made from glass-fibre-reinforced plastic (GFRP) – scrims made from technical fibres – smart sensors and smart textiles – scrims and reinforcement structures – preforms – carbon products – carbon-fibre textiles – inductive sensors. Our fleet of cutting-edge machinery comprises more than 80 embroidery units and our production is 100% carbon-neutral. We are committed to making our operations environmentally friendly, and apply technical and organisational measures to ensure that our company leaves the minimum impact on resources and the environment.

Website
BICKER ELEKTRONIK GMBH

Germany

We are your partner and solutions provider for reliable UPS systems, system components and power supply solutions for industrial and medical technology. Founded in 1994 and with its head office in Donauwörth, Bicker Elektronik GmbH develops, manufactures and sells reliable power supply solutions (3 to 24, 000 Watts), UPS systems and system components. These include industrial, IPC and medical supply units, encapsulated modules, DIN rail power units, DC/DC converters and modular DC-UPS systems with long-lasting energy storage devices (Supercaps, LiFePO4-, Li-Ion- and lead batteries) for uninterrupted power supply. The portfolio is completed by appropriate industrial mainboards from market-leading manufacturers. The perfectly coordinated "Power+Board" bundles save valuable time and money in system development. In addition to the core components of mainboards and power supply, Bicker Elektronik provides suitable processors, storage devices, coolers and an extensive range of industrial-quality accessories.

Website See all products
FRIGORTEC GMBH

Germany

Our products bear a special seal of quality: "Quality Made in Germany". There are good reasons why thousands of customers around the world rely on us: We know the industry and offer concrete solutions for specific challenges. We develop technically mature and robust products, produce them ourselves and put them through their paces. Our service is available to customers worldwide. FrigorTec has taken over the refrigeration division of Axima Refrigeration GmbH (formerly Sulzer Escher Wyss). The new brand stands for a young company that can draw on 60 years of experience. We use this experience in advising our customers, in development, production and in the service we offer. FrigorTec offers grain cooling systems, crane cooling systems, hay dryers, equipment for heat treatment of insects, individual container cooling systems, battery storage cooling systems and standard cooling systems - worldwide. Feel free to ask us for a cooling solution for your individual application!

Website See all products
ZS-HANDLING TECHNOLOGIES GMBH

Germany

ZS-Handling GmbH is an independent company that develops systems and installations for industrial handling technology based on ultrasonic air bearing technology. We offer products for gripping, conveying, loading and unloading, inspecting, sorting and isolating workpieces. Our areas of application include battery/fuel cells, films, glass, lenses, medical technology, packaging, wafers and chips. We operate internationally and sell our products all over the world. Our range is developed and produced at the Regensburg site in Bavaria. 2006: Founding of ZS-Handling GmbH in Regensburg by Dr.-Ing. Michael Schilp and Dr.-Ing. Josef Zimmermann with our patented ultrasonic bearing technology. 2008: Certification according to ISO 9001 – 2008 international quality management system certification. 2011: Market launch in China and Taiwan. 2013: Market launch in Korea. 2014: Production of first series systems. 2019: Entry into medical technology, especially ultrasonic grippers for intraocular lenses.

See all products
DEUTRONIC ELEKTRONIK GMBH

Germany

Deutronic supplies industry all over the world with leading technological solutions. As a specialist in power electronics, Deutronic designs, develops and produces innovative solutions with superior added value. As a result, our customers benefit from all the advantages of an owner-managed medium-sized high-tech company. As a technology and market leader for automotive battery charging systems, our products are used all over the world by leading automotive manufacturers in production, in workshops and in showrooms. Deutronic designs and implements application-specific special devices and customised solutions. The in-house research centre for energy storage technology systematically researches the performance of energy storage devices. The results of this research form the basis for optimum operational management. We focus primarily on the optimisation of battery-saving charging strategies in use. This leads to extensive knowledge in the area of battery charging technology.

See all products
LEONI DRAHT GMBH

Germany

Our LEONI Business Group Wire Products & Solutions is a leading supplier of highly advanced products and solutions made out of copper and LEONI Histral® alloys bare and plated, as well as composite materials. These are developed in close cooperation with customers for electrical components applications and the cable industry. Our versatile product portfolio includes a unique choice of wires, strands, ropes, heating conductors and wire solutions for automotive manufacturers and automotive suppliers. In addition we offer engineering services and innovative products for e-mobility as well as high power connectors and solutions for 48-volt systems, high voltage batteries, electric motors and for industrial applications. Apart from that, we have not forgotten our origins, despite all these modern, high-performance materials. We still produce traditional “Lyonese wares”, such as gold and silver-plated spun threads, bouillon and pearl wires for sumptuous embroidery and woven fabrics. Highly satisfied customer needs are the focus of all our actions. Our global sales and production network, consisting of locations in Europe, China and the USA, guarantees local consultation and support around the globe.

See all products
IN-TEC BENSHEIM GMBH

Germany

Consultancy – Development – Prototyping – Production. IN-TEC BENSHEIM has been supporting market-leading manufacturers from various industries in their production processes since 1996: As a system supplier, OEM and contract manufacturer, we have specialised in the production of prototypes, assemblies, cable assemblies and the assembly of complex equipment. Thanks to our many years of expertise, we provide inspiration in development processes and support you in creating individual solutions. We also offer our customers a full service, take over of the purchase, the component's logistics and their stocking. In the "e-mobility" sector, we support and advise you on topics such as HV on-board power systems, LV and HV cabling, HD Power Distribution Unit, fuse and breakout boxes, battery module connectors and on-board charger cable. With more than 80 employees and flexible designed production processes, we can respond very quickly to various customer requirements.

SCHÄFER ELEKTRONIK GMBH

Germany

DC/DC converters, AC/DC power supply units & battery chargers, DC/AC inverters, AC/AC frequency inverters, active harmonic filters, electronic loads, as well as thyristor-controlled power supply units & battery chargers. RANGE OF SERVICES: As a manufacturer of more than 4000 standard power supply units ranging from 100 W to 45 kW, the company also has the capacity to develop customer-specific products up to 3 MW. EXPERTISE: SCHÄFER, a manufacturer with over 40 years' experience in the development and production of industrial power supply units, stands for quality that is "made in Germany". The medium-sized company run by its owner has its headquarters in southern Germany, a production site in Ireland and sales branches in Boston, the USA and Dubai (UAE), as well as numerous representatives worldwide.
BST ELTROMAT INTERNATIONAL GMBH

Germany

By the merger in 2014, the long-established companies BST International and eltromat combined our expertise and know-how to a strong brand: BST eltromat International. Thus they are the leading full-service provider for quality assurance and production optimization for the web processing industry. BST eltromat is the only supplier in the market to offer its customers the whole range of quality assurance from a single source. The solutions are used in the printing, packaging, coating, converting, foil, rubber and tire production and the solar cell and battery manufacturing worldwide. No matter if individual components, standard applications or complex networked systems: On the basis of the decades of market experience, BST eltromat combines advanced technology with an eye for your individual production requirements. Their customers also benefit from the products of the strong brands BST ProControl and AccuWeb.
MICRO SYSTEMS TECHNOLOGIES MANAGEMENT GMBH

Germany

The Micro Systems Technologies (MST) Group, which is globally active, incorporates four technology companies with more than 1100 employees in three countries. The MST Group specialises in the development and manufacture of highly reliable electronics modules for sophisticated medical technology and industrial applications. The range includes: Highly complex flexible, rigid-flex and rigid HDI/Microvia printed circuit boards. LCP and chip substrate solutions. LTCC (Low Temperature Co-fired Ceramic) substrate. Semiconductor packaging, including the manufacture of stacked die BGAs. Latest assembly processes for SMT and chip-and-wire. Highly reliable batteries and battery systems for active implants. The MST technology companies have developed comprehensive and systematic methodologies to ensure impeccable product quality and reliability, and guarantee complete traceability of materials and processes.
E-STREAM GMBH & CO. KGAA

Germany

E-Stream GmbH & Co. KGaA was founded in 2019. Our core activity is currently the distribution of lithium-ion battery cells and energy storage solutions. Our maximum production capacity in the field of lithium-ion cells is as high 800, 000 cells per day (18650 and 21700). We are also currently in the certification phase of residential and industrial energy cabinets as well as energy storage containers, which will already be available for delivery in 2021. Furthermore, the E-Stream Research and Development department has worked on developing energy storage solutions which, thanks to their particularly rapid charging capacity, can be connected to charging stations using sustainable E-Stream technology. E-Stream implements products from the research and development stage through different stages of testing, which check for series conformity and operational capability, the manufacture of the initial prototypes to series production.
STAHLWERK SCHWEISSGERÄTE GMBH

Germany

STAHLWERK – Designed to impress! As one of the leading companies in its field, STAHLWERK has provided customers with leading products in premium quality, manufactured in its in-house facilities, since 1998. With its 7-year guarantee and comprehensive service even after the guarantee period, STAHLWERK is setting the standard even today. A wide product range – all from a single source Choose from our wide range: At STAHLWERK, you will find everything you need in the areas of TIG, MIG/MAG, ARC/MMA and electrode welding, as well as plasma cutters, battery chargers, compressors and a wide range of tools, spare parts and wear parts. Maximum quality and reliability Precisely coordinated manufacturing processes, expert employees and professional support for our customers even after purchasing are the hallmarks of our company through to the present day. Numerous satisfied customers across Europe – in industry, the trades and DIY – trust in our expertise.
MWT GMBH

Germany

1989–1999: Dr. Deyan Guan establishes MWT GmbH in Hamburg. Under the MicroWaveTechnologie label, the founder carries out technological research and development. A year into the company's existence, he enters the PCB business. Trade links with China are strengthened through the import and export of screwdriving tools and machines for the automotive industry. 2000–2009: MWT GmbH's most important cooperation partners are established – MWT International Trading Co. Ltd. in Shanghai and MWT Tools & Equipment Co Ltd. in Changchun. With the development of battery charging systems, MWT GmbH consolidates its position in the automotive industry. 2010–2019: MWT GmbH has firmly established itself in the trade and construction of systems, tools and machinery for automotive manufacturing as well as in the PCB business. The MWT research and development team now places new emphasis on the manufacturing of needs-oriented in-house products, encompassing all stages from market monitoring to market maturity.
LEDDEVIL (INGENIEURBÜRO WARNKE GMBH)

Germany

Warnke GmbH engineering company is a manufacturer and wholesaler of modern lighting for households, hobbies, industrial use and trade. Wholesalers of LED lighting for aquariums, manufacturers and wholesalers of industrial lighting, LED spotlights and solar street lamps, online seller of low-cost LED pendant lights, manufacturer of LED street lights with solar modules and 30 – 100 Watt batteries, wholesaler of park lights with infra-red motion sensor, wholesaler of LED spotlights for the film industry
ASGLAFORM COMPOSITES GMBH

Germany

We are an innovative service provider and manufacturer in the compression moulding of glass-fibre reinforced plastics. We supply a range of sectors, manufacturing not only vehicle parts but also underbody panelling, battery carriers and coupling keys for firefighting technology, as well as rudders for small boats. Our range of services includes designing, testing and optimising existing 3D data, as well as project management and manufacturing your products. The main areas of focus of our manufacturing are our presses with a pressing force of between 35 kN and 25, 000 kN, infrared and convection oven technology with heating surfaces up to 2.20 m x 3.40 m, our CNC machining with a 3D machining area of 2.45 m x 2.00 m x 0.6 m, and our measuring systems for optical component measurement. We support well-established large-series manufacturers in the automotive industry with our machinery as a contingency strategy, act as an "extended workbench" and provide not only our presses but also material and equipment manufacturers to carry out processing trials.
DREI BOND GMBH

Germany

ADHESIVES – DREI BOND has an extensive range of highly developed adhesives and sealants, and has been a recognised system supplier to the automotive industry in this area for decades. SYSTEMS – Whether engines, gearboxes and batteries in vehicles, or consumer electronics, plastic products or LED lamps, adhesives and sealants are used everywhere in a large number of applications. DREI BOND makes a wide range of metering solutions available for this multitude of applications. SERVICES – We are available to you at every step of the process and validation. We want you to be able to work with your adhesives and metering systems without problems, which is why we offer a wide range of appropriate services, such as initial adhesive inspections, prototype and small series bonding, support for a suitable bonding design, system repairs on site, training and much more.
SUBCTECH GMBH

Germany

SubCtech offers underwater technologies, subsea solutions and ocean monitoring systems. We find solutions in close collaboration with our clients - in the industry, in science and offshore oil+gas. Li-Ion batteries, e.g. pCO2 analyzers and system solutions are our core products and one-stop service. Our reliable and precise high-tech “Made in Germany” products are easy to handle and efficiency to our customers. The mixture of experienced employees, young scientists and market knowledge is so successful that the company has been profit-making from the first year on. We are certified by ISO 9001: 2015 and manufacturing according to ISO 13628-6 and API17f for design and operation of subsea production systems. Our qualified workshop and engineers are educated and certified for highest-quality IPC-A-600/610 class 3 production up to SIL-2. Our goal: meeting customers’ requirements - communicating well - working flexible - developing products constantly Our promise: Solving complex and challenging tasks - delivering professional solutions Our products: reliable - easy to maintain - resistant - comfortable to handle