protective caps Germany

...Protective caps for ISO 26623-1 tool holders with polygon shank Protects sensitive polygon shank tool holders from damage and contamination during transport and storage. Internal locking tabs prevent unintentional release from the shank. Made of impact-resistant and break-resistant polyethylene.

... primary packaging with a strongly rounded opening for easy insertion; double-walled design for maximum protection and elasticity; closed round protective base with an inner diameter of 10 mm; total length 80 mm, usable length inside approximately 70 mm for diameters from 4 to 10 mm. Color: orange with all the advantages of protective elements based on nets: > highly elastic and tear-resistant, adapts to...

...Pressure gauge protective caps primarily serve as impact protection against shocks, corrosion, and weather influences. The different colors are used to identify the application area. We offer standard stock sizes: NG 40 to NG 100; in the colors: black, red, blue, gray, yellow, green; in the designs square hole - slotted, without slot - without hole, square hole - without slot. Click here to view our related catalog page.

...Protective plugs and caps are used throughout the machinery and plant engineering as well as in the hydraulic industry. They serve to seal and secure sensitive components, effectively protecting them against scratches or other damage. We offer various designs for your specific application case. You can choose from different plastics and colors. Areas of application for protective plugs and caps: - Sealing and securing critical connection parts and end pieces. - Protection of internal and external threads. - Covering openings and drill holes. - Dust protection for sensitive components.

... anchor and foundation bolting with counter nuts. SECURE HOLD The high clamping cap HSW features a continuous clamping edge. This engages under the chamfer of the nut, ensuring a firm connection. LONG LASTING For our clamping caps, we always use high-quality and recyclable materials. The choice of materials and the round cross-section of the cap prevent bursting during assembly and in use. We standardly supply in black, which guarantees the UV stability of the cap and prevents premature damage and fading.

... of the protective caps has a round shape on the outside. These screw protective caps are available in many sizes for DIN and ISO standards. Decorative caps for cross-recess screws and internal hex screws also protect against dirt and damage by simply being pushed into/on the drive in the screw head.

... just as happy to create individual pieces and prototypes for you as we are to produce protective covers or coverings in series. Industrial and commercial customers can always rely on our service. With decades of experience in plastic processing for machine and metal construction as well as for technical objects, we are the right contact for you. We manufacture the covers in your desired size and quantity. There are no limits to size and quantity. Covers: Drywall Elements Protective Covers: Dry Construction Box Covers: Construction Elements...

The company Bäcker has been a manufacturer and supplier of technical standard parts, control elements made of plastic and metal, as well as custom plastic solutions for the industry for over 45 years. The extensive product range includes over 5,000 items with a total of 23,000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec®, and PlacoCap®. Our p...

... 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

...Load class D400 according to DIN EN 124. Slip-resistant surface. Protective coating. Locking with screws with internal hexagon SW14 (special screws optional). Insert field for optional operator logo. Includes protective caps for locking and extraction openings. Steel frame hot-dip galvanized with elastomer insert.

... jars • Position control during the tactile round transport • Dosage pump made of 1.4404 • 10 l hopper with level control • Filling nozzles operated by LinMot e-motor • Film placing system for pre-punched sealing films from a magazine operated by LinMot e-motor • 1-point pre-sealing to fix the film on the sealing edge of the jars • Sealing system with conductive sealing head (1200 W) • Screwing station with LinMot e-motor • Infeed conveyor for screw caps • Control cabinet with operating panel • Manual central lubrication • Protective glazing in aluminum/Makrolon Operating mode: fully automatic...

... Protective Caps 07111 Ball Pressure Screws Stainless Steel 07119 Pressure Screws Stainless Steel 07120 Threaded Pins with Pressure Tip DIN 6332 07140 Pressure Pieces DIN 6311 Order Number: 05900-106102 05900-106102 Hole Pattern M: 3 M6x35 Opening Angle Holding Arm A: 86° 26 Opening Angle Grip A1: 67° 39 Hand Force FH N A2: 160 6.5 Holding Force F1 N B: 1350 28 Holding Force F2 N B1: 1900 39 Clamping...

...Hinges, double hinges, ISO blind nuts, folder rivets, extension discs for folder rivets, screw rivets, drift pins, pointed staples, blind rivets, screw blind rivets, panel fasteners, Tree-Lok pins, Tree-Lok sockets, hex nuts, threaded pieces, hex screws, hex caps, thread protection sleeves, decorative caps, vent plugs, glass pads, elastic buffers, universal buffers, felts, anti-slip pads, covers for drill holes, ball knobs, protective corners, threaded plugs, adjustable gliders.

... for particularly high environmental requirements. Housing material: Plastic, metallized plastic, metal Design: Installation housing set, inline coupling, connector set, patch cables, protective caps Locking: Bayonet, M28 Mounting type: Front, rear wall mounting Special features: UV-resistant, weight-optimized variants available Connection type: Solder, IDC, screw connection Shielding: With/without shielding Connector type: RJ45...

...Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet. Article number:GU-50L D mm:50 d mm:20 h mm:0.5...

...An important factor that enhances hygiene and helps prevent infections is the proper surgical clothing: gowns, aprons, isolation gowns. Hygiene is the top priority in hospitals, especially in the operating room! An important factor that enhances hygiene and helps prevent infections is the proper surgical clothing: gowns, aprons, isolation gowns. But you will also find masks, caps, disposable gloves, protective sleeves, and shoe covers in our surgical clothing range.

...Protective caps for screws, hex nuts, and Torx screw heads, clamping caps for Pozidrive and Phillips screw heads, and covers for round and square tubes serve as protection against impacts and dirt while also providing an attractive appearance to the assembly. It can be manufactured in RAL colors upon request.

megro GmbH & Co. KG - Your company for medical technology has been a reliable partner of the medical technology trade as a wholesaler since 1972. As a logistics and marketing partner, we offer tailored solutions for medical wholesalers and specialists, for your practice, and for medical supply stores both domestically and internationally. We have continuously expanded our location in Wesel to meet...

...Protective Cap for Plasma Bottles Dimensions: H= 33.05 mm, D= 45.60 mm Item Number: 9501 Origin: Germany Material: PE...

...Safety helmets, caps, Safety glasses, welding goggles, face shields, Earplugs and earmuffs, etc. Work safety clothing Safety helmets, caps Safety glasses, welding goggles, face shields Earplugs and earmuffs Respirators, mouthguards Hand protection, protective gloves made of leather or rubber Foot and toe protection Safety shoes according to EN 345 Safety boots according to DIN Rubber boots...

...HATS, BEANIES, and HOODS are essential for many professions as work headgear or are required as protective headgear and safety hats. We offer a wide range of safety headgear. Catalog: https://www.davinci-smartwear.com/media/files/kataloge/DaVinci%20SMARTWEAR%20GESAMT-Hauptkatalog%20-%2002-03-2021.pdf...

...Robust Protective Cap Reinforced base and edge for increased durability. Ideal protection for cable and pipe ends of steel, copper, PVC, and HDPE pipes. Suitable for cables and round pipes 60-65 mm and particularly suitable for collection pipes. Material: Polyethylene (PE) Color: Yellow (RAL 1023) Manufacturer: WEROPLAST...

...Heat-resistant caps available in silicone (up to 300°C) or EPDM (up to 177°C), offered as standard parts or in custom designs, reusable. Heat-resistant caps made of silicone (up to +300°C) and EPDM (up to +177°C) in standard and custom part designs. We provide competitive prices and the shortest delivery times. Small series are also possible for custom parts at any time.

...Hexagonal protective caps, black for covering hex nuts and hex screws Material: Soft PE Color: Black similar to RAL 9005 Delivery time: approx. 3 working days...

...gastonmille protective caps for visitors - now even lighter...

... and possess antibacterial properties. The applications of these products include operating rooms, single-use masks, caps, surgical drapes, surgical gowns, and in all types of sets. For further details, please contact our customer service representatives.

...To better protect the sensor head of the GasPen from dirt, this protective cap can be put on the sensor head.

...PSA protective articles and antigen rapid tests are regularly available from us under very favorable conditions. Due to high demand, we kindly ask you to send your inquiries via email to info@soyoucheck.de. PSA protective equipment, antigen rapid tests, layperson tests, surgical masks, surgical caps, FFP2 masks, medical disposable masks, Category 3 overalls Type 3/4/5/6, protective gowns (SS and SMS), and much more. We welcome every inquiry. Please send inquiries to info@soyoucheck.de or call us at 0711/50438065.

...These caps are used to protect the factory-made weld bevels on large pipes (pipeline pipes). Thanks to the internal ribs, these caps provide a secure fit and allow for easy installation. • Up to Ø 6" the caps are delivered in natural LDPE. • From Ø 8" in black LDPE. Item No.: 01-05-002...

...Caps suitable for hole size 12.0 mm Material: PA Colours: last digits 013 = grey ~RAL7004 last digits 015 = grey ~RAL7035 last digits 021 = white ~RAL9001 last digits 599 = black ~RAL9006 without last digits = white ~RAL9003 Cap type 68 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035...