• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • electrical heating systems

Results for

Electrical heating systems - Poland

Poland
  1. F&X GROUP

    Poland

    The heating film is the high quality heating product used mainly for: underfloor heating, wall heating and ceiling heating, but the functionality of the product along with the unlimited human imagination creates the new usage of the heating film. The non standard usage of the heating film is the terrarium and camp site heating or used as a main heating element in radiators, platforms or heating pillows. The heating film is a hit in the recent years in the branch of heating in churches, where the local electric underfloor heating is a guarantee of the highest comfort and lowest exploitation cost. Thanks to the wide range of usage of our product, everyone will find the warmth for himself. You can design the electric underfloor heating by yourselves and not only. Contrary to the common opinion about the “expensive electric heating”, the heating film totally changes the aspect of the heating of that kind. The infrared heating consumes 60% less electric energy than the conventional heating systems! We grant our partners up to 60% discount on heating film 25% on Mounting accessories wie z.B. Isolation Mounting tape Cable Connectors Thermostats Minimum consumption - 1 roll of heating film or insulating fleece.

  2. KARDO INSULATION

    Poland

    KARDO Insulation #1 Polish Manufacturer of Insulation Boards which don't require the use of screed. Product Range includes: XPS - Expanded Polystyrene Insulation Boards EPS - Extruded Polystyrene Insulation Boards Underfloor Heating Systems - Water & Electric Underfloor Heating Accessories

  3. CINI SP. Z O.O.

    Poland

    We operate on the market as a manufacturer of electric heaters for radiators and bathroom radiators. All of our heaters are equipped with a thermostat, which allows for precise temperature control. We also have heaters with a touch control panel and a grille. In addition, we offer tees. We conduct wholesale and retail sale. We also provide transport services. We have a large distribution network in our sector. We supply major manufacturers of radiators in Poland, the European Union and overseas. Our offer includes heaters with thermostat type GT. These heaters are used as a complementary element to radiators existing in the central heating system or to heat small heating systems, including bathroom radiators or dryers. They can also be successfully used in other heating systems. However, heaters with electronic GTX thermostats are the result of CINI's previous experience related to many years of activity on the Polish and European heating market. GTX heaters are used for bathroom radiators, dryers and radiators operating in a central heating system. They work very well with stainless steel radiators. Moreover, they are very durable, due to the use of stainless steel heating elements. Heaters with electronic thermostat type QS are very popular. They are used as an intelligent heating element for radiators in the central heating system.

  4. SOLAR-BAU SP. Z O.O.

    Poland

    Solar-Bau provides products and services since 2014. The headquarters are in Katowice, Poland. The core business of Solar-Bau is renewable energy services, with RES design engineering and application. With five years of experience, Solar-Bau is more than capable of delivering quality service to customers who seek home and commercial applications. Products & services: - PV panels - Inverters - PV cables - Electrical transformers - PV system installation services - PV polycrystalline modules - PV single crystal modules - Glass PV modules The professional staff at Solar-Bau has the know-how and experience to deliver the right products and services. From project concept to delivery, Solar-Bau provides technical support and consulting. Operating professional tools and equipment, Solar-Bau delivers multi-tasked project performance for its customers. Solar-Bau also distributes complete PV systems with the solutions for efficient harnessing and conversion of solar energy into electrical power and heat. Solar-Bau also installs whole PV systems and panels. Our most common solutions include ground or roof-based PV installations. Solar-Bau is here to help you choose the right system for your application requirements. Optimized solutions to satisfy every demand? Solar-Bau has all customers covered. Reliable and timely delivery are Solar-Bau’s values. Contact Solar-Bau to see what it can do for you.

  5. LEPOLAM WICHROWSCY SP. J.

    Poland

    We adapt the technology and dimensions of our equipment to meet customer requirements. As a company with just over 25 years' experience in plastic processing technologies, we manufacture all our controllers and electronic components using our own equipment. Both our drying system and our furnace are developed and made in Poland. Our equipment stands out for its closed air-circulating drying system, which consumes 18 times less electrical energy. Having better control over the entire warming process means the system is more economical and more environmentally friendly. Our systems incorporate an additional layer of safety, protecting the parts to be heated from the risk of overheating if a functional element fails. Furthermore, being responsible for the entire production of the equipment, we can make sure that worn assemblies are replaced quickly.

Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages
  1. CREO CUBE

    Poland

    The CREO CUBE team consists of production employees, experienced specialists in the field of architecture and design entrepreneurs and building inspectors. Many years of experience in construction in the capital group in which Creo Cube allows us to implement not only prestigious, but also technically advanced projects. Comprehensively prepared and fully finished modules are transported to the destination and installed there in no time. The most modern materials are used to build the modules. When carrying out preparatory work on the plot, on special prepared production hall, a finished building is built according to Investor's guidelines. Our offer includes both ready-made and finished modules made to meet current market expectations, as well as created and designed according to the Investor's special guidelines. Our buildings made of ready-made parts are amazing in terms of functionality and at the same time meet safety standards, requirements fire protection and health and safety regulations. The constructions are in no way inferior to the traditional ones solutions – comfortable conditions allow for both leisure and study. Systems modular are characterized by good insulation warm and aesthetic. Each module has its own metered electrical installation, plumbing and ventilation with heat recovery. In addition, thanks to the use of ecological heat pump equipment in combination with our photovoltaic installation results in low operating costs for future building owners.

  2. ZAKLAD METALOWY ADAMET ADAM SARAMA

    Poland

    The Adamet Metal Plant was established in 2014, but its owners have been working in the metal industry for more than 20 years. Suitable experience and practice allowed the company to quickly take a solid position on the market. In the plant located in Wola Wadowska, in the Podkarpackie Voivodeship, pipe and cable reels are produced. These are specialist unwinders for various types of ducts or PEX, PERT, PE and HDPE pipes. Adamet products are used by installation companies, electrical plants, computer facilities, wholesalers and other representatives of many industries. The reels are designed in various ways and allow easy transport of cables and pipes used for floor heating systems, irrigation systems and other installations. Apart from developing products, the company is also engaged in the manufacture of sliding and hinged gates and other fencing elements. The company’s range further includes: – stop roofing; – staircase roofing; – terrace roofing; – sheet metal garages; – balcony guardrails; – railings. The company provides services to individual customers, companies and public institutions. Contact Adamet for a full range of products.

  3. PATELEC-ELPENA SP. Z O.O.

    Poland

    Verified by europages badge

    Patelec Group has been operating on the market for more than 50 years. We deal with copper manufacturing and processing, and our products are delivered to plants designing power tools, submersible pumps, medical instruments, and many more. It’s worth mentioning that all electrical cables, bare wires and strips made by us are subject to strength and ageing tests, and the copper rod processing service is performed according to EN 13602 and EN 60228. Exercising strict control of the entire production process, we also manufacture: – electrical plugs; – flat cables and split flat cables; – PVC cables; – round cables and spiral cables; – electrical wires; – wire rods. Main products in our range are low voltage cables with PVC or rubber insulation for 300/500 V– 450/750 V. We provide cables meeting such standards as SPT, SV, VCTF and SJ. We also produce cable harnesses suitable for supplying of machinery operating in wet environment or fully submerged and on the water surface. Our in-house engineering solutions include Ghelios products manufactured for operation in areas requiring low smoke emission and toxicity in the event of a fire, as well as Thorex products used in hazardous (ATEX) zones. Additionally we recommend a patented Hercules design for high load transfer applications, characterised by water and oil resistance.

  4. ALNOR VENTILATION SYSTEMS LTD

    Poland

    Verified by europages badge

    ALNOR Ventilation Systems is a Polish manufacturer of complete ventilation systems. With a state-of-the-art machinery park, a modern testing lab, and a large warehouse facility, we are able to supply wholesalers and distributors around the globe with practically everything they need to operate an HVAC company. Besides galvanized, stainless steel and aluminum sheets, we use chemically resistant plastics: PVC, PPS, PP, PP-ELs, PE, and PDVF for aggressive environments. We can also custom-make it for you if we do not have it already in our warehouse. The company provides a wide range of components forming complete ventilation systems, such as ventilation ducts and fittings, heat recovery units, fire dampers and many more! ☑ ventilation ducts and fittings — round and rectangular, ☑ fire protection system— fire and smoke dampers, smoke fire rated ducting ☑ constant and variable air volume flow regulators (CAV and VAV) ☑ heat recovery units - centralised and decentralised, ☑ air distribution system for HRV— HDPE semi-rigid duct system: plenum & distribution boxes included, ☑ round and rectangular air dampers, ☑ duct silencers: round and rectangular and flexible ones, ☑ mounting accessories for round and rectangular ducts, ☑ prefabricated units for ducts — duc flange profiles, corners, ☑ air valves, grilles, diffusers and plenum boxes ☑ flexible ducts ☑ roof cowls and bases ☑ auxiliary devices and elements — actuators, fans, ☑ air filters, Sounds intresting? Contact us!

  5. PROFESJONALNY SERWIS KOTŁÓW GAMBIT. PIOTR BORECKI

    Poland

    The company PROFESJONALNY SERWIS KOTŁÓW GAMBIT. PIOTR BORECKI, is a Multi-Category, which operates in the Stoves, heating industry. It also operates in the heating system, boilers for home use, boilers, and heating system repairs industries. It is based in Gliwice, Poland.

  1. SYSTEMY GRZEWCZE AR

    Poland

    The company SYSTEMY GRZEWCZE AR, is a Multi-Category, which operates in the Stoves, heating industry. It also operates in the Heating, domestic - installations and equipment, Heating, domestic - installations and equipment, Heating systems - external, central heating systems, and heating system industries. It is based in Dzierżoniów, Poland.

  2. ZRYW SP. Z O.O. PRZEDSIEBIORSTWO ROBOT ELEKTRYCZNYCH

    Poland

    The company ZRYW SP. Z O.O. PRZEDSIEBIORSTWO ROBOT ELEKTRYCZNYCH, is a Subcontractor, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the Electricity - works, Electricity - works, subcontract cable assembly, industrial electrical systems, and industrial electronic automatic mechanisms industries. It is based in JAROSLAW, Poland.

  1. ANLUKS ELEKTROINSTALATORSTWO ANDRZEJ KOMOREK

    Poland

    The company ANLUKS ELEKTROINSTALATORSTWO ANDRZEJ KOMOREK, is a Service Provider, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the in-house electrician industries. It is based in Szczecin, Poland.

  2. HURTOWNIA ELEKTRYCZNA MKD ELEKTRO

    Poland

    The company HURTOWNIA ELEKTRYCZNA MKD ELEKTRO, is a Wholesaler, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the industrial electrical systems, and electric automatic controls industries. It is based in Warszawa, Poland.

  3. ELEKTRO PROCES SP. Z O.O.

    Poland

    The company ELEKTRO PROCES SP. Z O.O., is a Manufacturer/ Producer, which operates in the Electrical and magnetic insulation industry. It also operates in the electrical systems, and industrial electrical systems industries. It is based in Kraków, Poland.

  4. ENERGPOL

    Poland

    The company ENERGPOL, is a Subcontractor, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the in-house electrician industries. It is based in Katowice, Poland.

  5. FIRMA INSTALACYJNA ELEKTRON SP. Z O.O.

    Poland

    The company FIRMA INSTALACYJNA ELEKTRON SP. Z O.O., is a Service Provider, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the industrial electrical systems, Montaz instalacji fotowoltaicznych, execution of electrical systems, and electrical systems for buildings industries. It is based in Sulistrowa, Poland.

  6. OPAL WOJCIECH POPŁAWSKI

    Poland

    The company OPAL WOJCIECH POPŁAWSKI, is a Subcontractor, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the electricians industries. It is based in Warszawa, Poland.