Results for

Service Provider - Process technology for plant engineering

15 Companies

0 Products

STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
DOSATRONIC GMBH

Germany

Welcome to DOSATRONIC GmbH Measuring | Regulating | Dosing | Disinfecting We have been developing, producing and selling high-quality products and systems in the field of water treatment, waste water treatment, process water, drinking water, swimming pool water and environmental engineering worldwide for nearly 15 years. We specialise in the following areas: Water treatment, waste water treatment, plant manufacturing, chemical industry, beverage industry, swimming pool technology, hospital technology, fish farming, farming, electroplating, surface technology, measuring and control devices, pH and redox electrodes, measuring cells for conductivity, turbidity, temperature electrochemical sensors, as well as chlorine, chlorine dioxide, ozone, hydrogen peroxide, peracetic acid, oxygen dosing pumps, complete dosing systems, disinfection systems such as chlorine dioxide systems, UV systems and swimming pool technology
VOGELBUSCH BIOCOMMODITIES GMBH

Austria

Vogelbusch Biocommodities is a global technology and service provider for industrial bioprocess plants. The company specialises in industrial biotechnology and designs plants for the sugar, starch and food processing industry.Vogelbusch offers proprietary processes for biocommodities such as alcohol, bioethanol, yeast, vinegar, as well as glucose, dextrose, high fructose syrup, and citric acid. Engineering and system integration services are also carried out for grain processing complexes and third party fermentation processes.With many years of experience with fermentation techniques Vogelbusch is well acquainted with the differing requirements of bioreactor design. The portfolio of separation technologies for the final processing of fermentation products includes distillation, evaporation, ion exchange, chromatography, filtration, crystallization, and extraction. Expertise accumulated over more than 90 years enables Vogelbusch to tailor plants precisely to clients’ requirements.
YIVA ENGINEERING SPRL

Belgium

YIVA Engineering is an engineering and project management consulting company for industrial projects. The company has been set up by experienced chemical engineers having 23 years plus experience in industrial plants. Our Core Business, -Engineering and feasibility study -Project Due Diligence -Bankable feasibility study -Project Engineering, -Process Engineering, -Project Management, -Consulting services in the mining and metal industry, metallurgy, renewable energy(Solar, wind, biomass etc..) -Outsourcing services (placement of engineers, project managers, technicians, etc..) Having operational and design experience in RHF (rotary hearth furnace) technology for the treatment of zinc-bearing wastes as well as Waelz technology. In recycling cluster, Evaluation and providing solutions for industry to recycle valuable industrial wastes like electric arc furnace dust (EAFD), BF, BOF dust, any type of slags, any type of solid wastes and complex mining deposits turn into valuable output for metals and others (like zinc, lead, copper, silver, gold, iron metal, aluminium, lithium, rare earth metals etc..) YIVA can provide solutions for industrial waste, provide laboratory test works, piloting test works, process simulations for process design, basic engineering and bankable feasibility study, providing necessary packages to detailed engineering companies, supervising engineering activities, project management, plant commissioning management, training of plant operators etc..
JADRAN D.O.O. BEOGRAD

Serbia

Jadran d.o.o. is recognized as one of the leading civil engineering business systems that firmly holds the leading position in the following sectors: Final works in construction, Anti-corrosion protection and fire protection coatings, Sandblasting, Maintenance of infrastructure facilities, Renovation, Adaptation and equipping of business facilities. The company has managed to preserve the leading position for more than 60 years now, and as a rare one, strives towards strengthening the market-oriented business policy. This allowed it to record more than 15, 000 objects in Serbia, Russia, the Czech Republic, Libya, Kuwait, Algeria, and Egypt among many other countries. Jadran has gathered a highly qualified engineering and technical team with the licenses of responsible contractors: 400 - building and civil engineering installations 410 - construction structures and construction and craft works 414 - hydrotechnical facilities and installation of water supply and sewerage 430 - thermotechnics, thermoenergetics, process and gas techniques 474 - landscaping and freezing of free surfaces 475 - construction of technological plants 381 - energy efficiency of buildings

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

CLUSTERTECH INTERNATIONAL D.O.O.

Croatia

Our metal machining activities at the Croatian Sv. Helena facility include CNC metal machining and standard metal machining. In addition, we have competencies in the field of electrical engineering, which allow us to produce and install wiring, driving, sensing and controlling equipment, i.e. to produce complete electromechanical subassemblies. The technologies we use are supported by our internal engineer resources and we use advanced technologies such as CAD/CAM tools. Technical capabilities of metal machiningOne of the things that makes our plant special is our CNC machining center. This CNC metal machining device is equipped with a console crane, a tailstock, a C-axis and driven tools and is capable of machining down to a diameter of as little as Ø 1.118 mm. On the other hand, we also offer CNC machining for small items using our small machine. We also provide CNC milling, rotary grinding and other ancillary technical services such as cutting and grinding.The materials we machineOur most extensive experience is in the field of aluminum, brass, steel and plastic machining. We are also capable of machining other materials, such as stainless steel, copper and gray iron.Process managementWe have automated our machining processes by using an advanced information system, which allows us to achieve full traceability, cost management and HR savings. This method of op
STUDIO TECNICO AMBROSI

Italy

The Company has been providing consulting services since 1999 in the following areas: Energetic Material production, NAC-SAC plant technology, Reprocessing of spent mixed acid, Nitric acid and Sulfuric acid concentration, NOx abatement with Nitric acid recovery, Feasibility studies, Simulation, Scale-up and Optimization of Industrial processes, Zero Liquid Discharge Concept Design with implementation inside the existing processes. Likewise, we provide Safety Analysis and HAZOP studies, as well as development and engineering services up to turn-key installations, with know-how and expertise drawn from within our Company. Our Consulting Activity is aimed at providing support to Companies which want to be assisted in the development of specific reprocessing technologies for their industrial waste acids and water, by means of internally engineered procedures/methods, as well as to Companies which are in need of a supply of either specific Process Units or complete turn-key Plants. The scale-up of new technologies is carried out by means of a preliminary accurate study of the process on pilot-plants in order to ensure that all the client's requirements are fulfilled. Likewise, consultation is provided for a detailed Safety Analysis and Risk Assessment during all the design stages. We have also established a strategic partnership with ATR Asahi (P) Ltd. in order to reach a widespread distribution in Asia and assure a continuos growth.
E.T.S. SISTEMI INDUSTRIALI SRL

Italy

ETS Sistemi Industriali was established in 1996, thanks to the long experiences acquired in the Services and Contracts. ETS Sistemi Industriali have developed its know-how through realization of complete system. This has contributed to acquire necessaries know-how, technologies and specialized personnel in the various fields of Industrial Engineering. Mechanical, electric and piping design. Following the national and international technical and safety normatives, ETS Sistemi Industriali has today the necessary experience for services dedicated to process monitoring, plant supervision, dedicated non distructive testing (traditional and advanced like Leak Test and Acoustic Emission Test), and to collaborate with customer for Maintenanca, Technical and Ispections Consultations, NDT Inspection Services, Piping and facilities realisation, Clean Room and Labs Maintenance etc. Our main business fields are: Naval-Shipyard, Semiconductors, Aerospace, Military.
MAINTENANCE ENGINEERING PROCESS CONTROL AFFILIATES

United Kingdom

MEPCA – Maintenance Engineering Process Control Affiliates is a monthly journal, providing advice and solutions for management and technical challenges encountered by Managers and Engineers in the process, control and plant industries. An in-depth and innovative guide to the most state-of-the-art products and advanced technologies in the business, with up to date industry news, including input from the BSIF, UKAS and the EEF, among others. With Readers worldwide, our subscription based distribution consists of - All UK’s major manufacturing units. Process Engineers, Instrumentation Engineers, Chemical Engineers, Plant Engineers, Mechanical Engineers, Environmental Engineers, Precision Engineers & General Engineers. Companies and Organizations in the Food-Dairy-Beverage-Brewing-Aerospace-Semiconductor-Pharmaceutical-Biotechnology-Metal
SAN MAX LTD

Bulgaria

San Max Ltd. is an authorized dealer of China plant which supplies extrusion lines, blow molding machines (thermoforming), filling machines and auxiliaries for plastic machines at a reasonable price.Our company is 6 years in the market of China for extrusion machinery. The main oour products are extrusion lines and their components such as conical twin screw extruders, single screw extruders, parallel twin screw extruders and obviously screws and barrels.Among plastic processing equipment we also have pleasure in offering you the following goods – profile extrusion lines and pipe extrusion lines.Modern extrusion lines are engineered using high technology that provides high-rate activity and technological task performance. These extrusion lines are simple in control and handling operation and are notable for small size. Equipment is reliable and enduring, because all blocks of extrusion line are made of super-hard material.The main advantage of our company consists in a complete require

LINK CONSULTING ENGINEERS

India

LINK CONSULTING ENGINEERS- VADODARA-390007CONSULTANT FOR PROJECT, PLANT & PRODUCT DESIGNING ANDDETAILED ENGINEERING / DRAFTING SERVICES.FIELD OF OPERATIONS : • Petroleum Refining (Refinery)• Petrochemicals• Fertilizer• Chemicals • Oil & Gas Based Facilities• Power Plant• Pharmaceuticals• Industrial Plant and Process Based IndustrySERVICES OFFERED : • Design Engineering• Project Detailed Engineering• Pre & Post tendering Services• Estimation & Costing• Utility Systems Design• Engineering & Development• Modification & Debottle Necking• Modernization, Expansion & Revamping• Technology Absorption• Process Equipment Design, Selection & Specifications• Piping• Pressure Vessels• Civil/ Str. Steel• Electricals• Instrumentations & Other Discipline• "AS BUILT" Detailed Engineering Job in Piping, Pressure Vessels, Str. Steel & Other Discipline.• Material Reconciliation Job• Check List Verification Job (based on Consultant Documents)• Import Substitution• Development of Component, Spare Part Drawing
MACHINERY VIBRATION CONSULTANTS LTD

United Kingdom

Machinery Vibration Consultants Limited is an independent company offering a wide range of engineering and consultancy services with the aim of reducing plant maintenance costs, operation support costs, and downtime process costs through the application of technology in a safe and cost-effective way.

B+B ENGINEERING GMBH

Germany

Our company was founded in Magdeburg in 1991. The main activity was initially consulting and customer service for plant construction in the food and pharmaceuticals industries. At the end of 2011, the company took a new direction with the expansion of its business to include engineering and plant construction for the chemicals, pharmaceuticals and food industries as well as the energy sector. A team of experienced engineers and plant manufacturers, skilled in taking up exceptional challenges, was put together to form the basis of the company's new orientation. The renaming of the company as B+B Engineering GmbH was the first visible indication of this change

Website
BPROJECTS

Italy

The company BPROJECTS, is a Service Provider, which operates in the Machine tools - metal machining industry. It also operates in the Engineering - industrial consultants, plant engineering, process engineering, industrial automation, and Engineering - industrial consultants industries. It is based in Pinerolo, Italy.
CETEC GMBH & CO. KG CELLULAR TECHNOLOGY, ENGINEERING AND CONSULTING

Germany

The company CETEC GMBH & CO. KG CELLULAR TECHNOLOGY, ENGINEERING AND CONSULTING, is a Manufacturer/ Producer, which operates in the Finishing work industry. It also operates in the Electricity - works, Electronic data processing - software, Information technology - data processing media, Telecommunications - equipment and systems, Electricity - works, Electronic data processing - software, Information technology - data processing media, and Telecommunications - equipment and systems industries. It is based in Oberhaching, Germany.

Find quotes for

Filters

Results for

Service Provider - Process technology for plant engineering

Number of results

15 Companies