3d laser scanners - Import export

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained.

The QS View software package is intended for dimensional control in 2D or 3D QS-View 2D / 3D software for all measuring tasks 3D representation of an irregular body for determination of volume and weight. With the 2D / 3D software a wide variety of parameters can be processed and displayed, e.g. length, width, angle height, gap, presence, volume (resp. weight), seam geometry (height, width), gap dimensions. Due to the modular structure of the software, customized specialties can be added any time. Each module delivers the results to an individual output module. The universal SPC interface allows simple connection to S7 controllers via Ethernet. 2D / 3D software developer kits are available for integrators with corresponding knowhow.

The new QuellTech Q5 Laser Scanner Series combines the advantages of small form factors with both high resolution and scan rate. The sensor disposes of different set-up possibilities with respect to the analysis algorithm. Measurement results are delivered via Ethernet, calibrated in the X / Z plane. Special adjustable algorithms can be selected, extremely useful particularly also for optically most demanding surfaces. Time-consuming calibration tasks for the user are no more required, as the calibration routine runs on board. High Scan Rate with up to 14,000 Profiles per Second Due to an appropriate limitation of the image range (AOI) in X and Z direction, the scan rate could considerably be increased. High resolution and detection frequency with up to 14.000 profiles and 28 Mio. points per second •X measuring range from 10 to 1022 mm •Z measuring range (height) from 5 to 878 mm •Laser wave length blue 405/450nm, red 650nm

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).

With its fast and innovative 98-laser-line mode, the FreeScan Trio is SHINING 3D's first marker-free laser 3D scanner. Less preparation, more efficiency. The FreeScan Trio's three additional laser scanning modes deliver unrelenting accuracy, each reaching up to 0.02mm with markers. This metrology device also features built-in photogrammetry to offer an impressive volumetric accuracy of up to 0.02mm + 0.15mm/m. Whether you need speed or accuracy on small or large assemblies, the versatile FreeScan Trio is geared for all your projects.

Variety of 3D additive printing processes, for parts with high demands on precision, finish and quality visual appearance.Consult our services without compromise, the 3D world has infinite possibilities, little known in the world of industrial manufacturing.

A 3D scanning is like a digital 3D photography of the real world – but where each pixel in a digital photo only contains information about colour, each pixel in our “3D images” further contains information about it's position in XYZ coordinates in space. We can scan everything – from cars, airplanes, ships, factories to processing plants, bridges, tunnels, buildings you name it. We have several different scanners – among others a FARO FOCUS X330 that can scan from 0,6 mm up to 330 meters with a length-precision of +/- 2 mm! A laser scanning produces a so-called point cloud, which can be imported in all common CAD programs: #AutoCAD #Inventor #Revit #Navisworks

Contrast with the color depending on the nature of the substrate from which the laser rays are refused. For this type of recording is not required living or artificial light.

Binocular integrated carbon fibre structure. Dynamic measurement technology, less sensitive to vibration and noise in the workshop. Duel scanning mode. The Hyperscan 3D Laser Scanner also supports scanning with tracked by self positioning system, and scanning without tracker using markers and positioning system. Can utilise a wireless portable CMM using the ZG Probe and get efficient, accurate GD&T. 34 blue laser lines, scanning speed up to 2,100,000 measurements/s Fine details scanning up to 850,000 measurements/s 7 parallel blue laser lines to capture super clear and precise details

FAQ: 1. How To Order ? Step 1, please tell us what model and quantity you need; Step 2, then we will make a Order Invoice for you to confirm the order details; Step 3, when we confirmed everything, You proceed with the payment arrangement; Step 4, finally we deliver the goods within the stipulated time. Q: What's your payment terms ? A: We can accept Bank Transfer, Western Union, MoneyGram Q: What's your shipping method and delivery time ? A: After the shipout, it take 3-5 days depending on location, Via DHL/EMS/TNT/UPS/FEDEX/OTHERS, it is safe and fast All orders will ship out 24 hours or less after placing order Every purchase is backed by Warranty, guarantee with easy returns Policy

Based on the high quality laser scanner Z+F IMAGER®, Zoller + Fröhlich GmbH and DMT GmbH & Co. KG have developed an explosion proof 3D laser scanner. The Z+F IMAGER® 5006EX pioneers surveying in underground mining and industries where explosive atmospheres occur. The Z+F IMAGER® 5006EX is the world´s first ATEX approved 3D laser scanner for use in mining and industrial applications under explosive conditions.The Z+F IMAGER® 5006EX is class I and class II approved according to ATEX directive 94 / 9 / EG. The ATEX directive 94 /9 / EG "Equipment and protective systems intended for use in potentially explosive atmospheres" is a European standard. The ATEX approval for this equipment is widely accepted outside the European community as well.

The terrestrial 3D laser scanner Z+F IMAGER® 5016A combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. With feature A, which stands for Advanced, the 5016 receives twice as high scan rate of up to 2.187 million pixels/second and more options for leveling the scanner. If the dynamic compensator is deactivated or the tilt is outside the defined range, the tilt is detected by the IMU of the Z+F IMAGER® 5016A.

Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.

Laser sensor Q4 – with a small form factor – Q4 for standard 2D / 3D measuring applications: Low sensitivity against influences of secondary light Measuring ranges from 5 mm to 1000 mm Laser wave lengths starting from UV via blue, red and green through to IR Average measuring speed up to 350 Hz frame The Q4 laser sensor has been designed to meet the requirements of standard measuring applications. Thanks to its increased flexibility, it can be used for several tasks also in complex projects. The dimensions of the ultra-compact version amount to only 86x40x25, at a weight of 140 g. Protective panes and cooling modules are available as an option. The Q4 laser sensor model enables users to obtain stable measuring results also on difficult surfaces, whether mirroring or transparent. The QS-View Standard Software comprises a comprehensive selection of application modules, to be invoked at once without previous programming steps. Customized adaptations are possible any time.

Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.

3D laser scanners for inline quality inspection The scanCONTROL 3D scanners are used for inline 3D scans with high accuracy.

As the blue laser handheld 3D scanner of the FreeScan series, FreeScan UE inherits the iconic features of "high accuracy" and "high precision". At the same time ergonomic and lightweight equipment design, make it easier to hold and operate, providing metrologygrade, highaccuracy inspection solutions for the automotive, transportation, aerospace industry, moulding inspection, energy generation, machinery manufacturing and etc.Metrologyclass high accuracy Accuracy up to 0.02mm, Volumetric accuracy 0.02mm+0.04mm/m.Stability of repetitive measurement When measuring the same workpiece repeatedly, FreeScan UE delivers consistent results, proving stability and reliability.

Based on years of 3D measurement experience and market demand, SHINING 3D innovatively integrates blue LED light and blue laser into EinScan HX handheld 3D scanner. The hybrid laser and LED light sources make EinScan HX compatible with a wider range of object sizes, meeting multiple needs of users. High efficiency and reliable result give EinScan HX more application possibilities.

FreeScan UE Pro Laser Handheld 3D Scanner inherits the highprecision, metrologygrade accuracy, and lightweight design of FreeScan UE, while improving the ability of fine scanning and global precision control of largescale workpiece scanning. It adopts 26+5+1 blue laser lines and integrates a photogrammetric module. Taking into account speed, accuracy and details, this professional 3D metrology solution can be applied to different sized scanning scenarios and perform metrologygrade accuracy inspection, reverse design, additive manufacturing and other applications.MetrologyGrade High Accuracy Accuracy up to 0.02mm, delivers consistent scanning results with high precision.Integrated photogrammetry function no need to apply coded targets, quickly locks the spatial position of the target frame.13 cross laser lines to scan large objects quickly, 5 parallel laser lines to scan fine details and single laser line for deep hole and pocket area scanning.

The Z+F PROFILER® 9012 has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

The terrestrial 3D laser scanner Z+F IMAGER® 5016 combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. Dimensions Usable in smallest spaces Carry-on luggage size Weight Laser scanner without battery: ≤ 6,5 kg (14.3 lbs) Laser scanner with 2 batteries: ≤ 7,5 kg (16.5 lbs) Ideal weight for stable setup Makes field work easier

Highly accurate measurement results require static scans from multiple angles, whereas mobile solutions focus on efficiency. The Z+F FlexScan® platform developed by Zoller + Fröhlich combines the advantages of static scans with the efficiency of mobile systems. The perfect complement for any time-sensitive or large-scale application: AEC, facilitiy management, process industries, heritage documentation and forensics. + Universal mounting The Z+F FlexScan® 22 is highly versatile and can be easily used with various support systems. This SLAM platform can be attached to backpacks, tripod carts, fixed tripods, and robots. Thanks to the Quick Mount System, switching between support systems can be done in just a few minutes. Furthermore, data captured with different support systems can be effortlessly registered in Z+F LaserControl®.

For listed buildings, there are regular new construction tasks. Often there are no adequate plans on the basis of which planning, modernization or renovation can be carried out. Due to the very high scan rate of more than 1 million measured values per second, range resolution in the millimeter range and a measuring accuracy in the mm range, even the capture of the finest structures and details is still possible with the 3D laser scanners from Zoller + Fröhlich. The 3D documentation is therefore the ideal prerequisite for reconstructions of, for example, design conditions or sensitive stucco work. The recorded inventories, damage, structures and details are recorded in databases and allow a faithful reconstruction of the entire object or of parts of the object at any later time.

Within a few minutes, Z+F 3D laser scanners can provide accurate measurement data of crime scenes and accidents – indoors and outdoors. This data speeds up the investigation process by "freezing" the scanned crime scene and documenting it. These evaluations are accepted in court. Accident investigation The phase based 3D laser scanners of Z+F enable an accurate three-dimensional capturing of complete accident scenes with all the details like deformations of the vehicles or skidmarks. Using this technology, the question of the possible causes and sequence of the accidents can be analysed and answered more easily. Crime scene investigation The complete securing of evidence at crime scenes and the geometry measurement on the spot are of great importance. A crime scene is normally captured from various positions by the Z+F IMAGER®. By combining these scans, the viewer gets an overview of the complete scene.

Z+F 3D phase based laser scanners enable a detailed condition and damage assessment. Due to the high sampling rate as well as a range resolution of less than 1mm and a measurement accuracy of millimetres, even the most delicate structures and details can be documented. The surveyed status, damage, structures and details are stored in a database which allows the reconstruction of the complete object or parts of the object at any given time in the future.

Z+F 3D phase based laser scanners enable a detailed condition and damage assessment of the current status of a building or complex structure and its surroundings. It is easy to create 2D floor plans or views of the object to plan building or conversion projects of the 3D data. Therefore, 3D data is an ideal planning basis for structural measures. For site measuring, 3D documentation is just the right technology, because you will save time and money. Moreover you can evaluate different options of how the available rooms can be used without accessing the site in reality. The whole work can be done from your office desk and the data will be available even after many years. Structural damages Structural damages always mean economic loss for the owner and user of a building, and can influence the future value of a property significantly.

Faro Focus S150 for sale, brand new 1-Year Manufacturer Warranty, License SCENE Software and Maintenance Contract Faro Focus S 150 sale includes: Faro Focus S 150 Laser Scanner: with HDR Photography, GPS, Compass, Altimeter (Barometer), Dual-axis Compensator, WLAN, Accessory Bay, IP Rating 54, On-site Compensation Functionality, Quick Start Guide, Calibration Certificate, Rugged Transport Case Battery Power Block, Battery Power Dock 90W Power Supply 32GB SD Card, SD Card Reader, SD Card Cover Optic Cleaning Fluid, Optic Cleaning Tissues Allen Wrench 1x License SCENE Software and Maintenance Contract 1 Year Manufacture Warranty The ultra-portable FocusS 150 enables fast, straightforward and ultra-high accurate measurements of objects and buildings. It records architectural façades, complex structures, production and supply facilities, accident sites, and large-volume components delivering realistic and true-to-detail scan results with a range of 150m per scan.