Pumps - Import export

Stainless Steel, also available in non corrosive plastic housing, Inverter heat pumps are equipped with variable speed compressors, depending on the energy demand and the surroundings conditions, higher efficiencies at much lower sound pressures, 65% higher C.O.P as for common on and off heat pump, Modbus capable, touch control with integrated WLAN connection for control via mobile device, titan heat exchanger, R32 defrosting liquid

Convenient pump dispenser for our 5L sanitiser canister.

Gravure printing machine for marking opposite sides of hot plastic insulated cables Dual head printer Marking of text and numbers Medium speed Exchangeable ink supply system STANDARD CONFIGURATION Frame with support column and height adjustment crank mechanism. Marking unit with synchronized, phase-adjustable drive for two facing printing discs. Integrated control electronics and built-in control console. 1 set of dedicated ink wipers and guide rollers matching the specified printing discs. Replaceable, compact ink supply module with ink tank, pump, cooler, filters, and ink flow fine adjustment valve. Complete tacho adjustment unit. Complete accessories kit without printing discs. Electronically synchronized printing disc drive. Mechanical phase control for staggered marking. Replaceable ink supply module for quick color change within about 2 minutes. Optional second ink supply module allows even faster color change.

THE NEXT STEP IN PUMP TECHNOLOGY EVOLUTION: ENERGY-SAVING, HIGHLY EFFICIENT AND PROFESSIONAL. SERVOTRON® is available in the power classes 37 kW and 45 kW. Its operating pressure of 4,000 bar has been considered to be the optimum in the professional waterjet cutting sector for years. The Austrian technical control board has confirmed that up to 24% energy can be saved with SERVOTRON® in a comparison with conventional pumps. It is available with a flow rate of 3.8 l per minute and 4.6 l per minute. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.

AUTOFRETTAGE MAXIMUM PRESSURE PUMP The complete pump unit is installed on a base frame; it is operated with an operating panel that is connected with the pump via cable. Pre-selection of the maximum test pressure can be continuously adjusted to up to 12,000 bar. The pump is switched off automatically after the set pressure is reached. The flow rate can be continuously adjusted from 0 to 0.5 l per minute and thus enables a defined build-up of the required autofrettage pressure.

These test stations are designed for pressure testing of valves with an operating pressure of up to 5,500 bar. Gas compressors and pressure reservoir for testing with nitrogen as well as hydraulic stations for connecting and switching valve drives are available. The complete high-pressure valve test station is controlled with a central control panel. Mobile or fixed pressure testing pump can be used to generate pressures of up to 5,500 bar.

The complete pump unit is installed on a base frame; it is operated with a central operating panel. Pre-selection of the maximum test pressure can be continuously adjusted to up to 5,500 bar. The pump is switched off automatically after the set pressure is reached. The flow rate can be continuously adjusted from 0 to 1 l per minute and thus enables a defined build-up of the required test pressure.

The complete testing pump unit is installed on a trolley with suspension device and thus designed for mobile use outside. It is available with different explosion protection versions. Operation takes place via cable remote control. Pre-selection of the maximum test pressure can be continuously adjusted to up to 5,500 bar. The pump is switched off automatically after the set pressure is reached. The flow rate can be continuously adjusted from 0 to 1 l per minute just like for the workstation pressure testing pump.

THE PROFESSIONAL PUMP WITH A HIGH VOLUME FLOW FOR MULTIPLE-HEAD APPLICATIONS. EVEN PRESSURE SIGNAL FOR HIGH PRODUCTIVITY. Proven 4,000 bar technology combined with high flow rates – greatly appreciated by the professionals. Especially for multiple-head applications, HYTRON® always ensures the required volume of high-pressure water. HYTRON® provides 6.0 or 7.6 l per minute with 4,000 bar. Whether you are using two or four abrasive cutting heads simultaneously, HYTRON® provides continuously adjustable pressure from ten to 4,000 bar. The two chamfered pressure intensifiers create an optimal cut. Customers buy European products because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality CONVENTIONAL WORKING PRINCIPLE WITH EVEN PRESSURE

PROVEN TECHNOLOGY WITH HIGH STANDARD OF EQUIPMENT AND FIRST-CLASS PRICE-PERFORMANCE RATIO ECOTRON® is available in the power classes 11 kW to 45 kW. The operating pressure of 4,000 bar is the perfect balance between long maintenance intervals and high cutting speed. ECOTRON® is our basic model with flow rates between 1.2 and 4.3 l per minute and an operating pressure of 4,000 bar. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.

INCREASE THE PRODUCTIVITY OF YOUR EXISTING WATERJET CUTTING SYSTEMS BY AT LEAST 30 % With HYPERTRON®, you can reach a 30 to 50 % higher cutting speed and energy efficiency combining servo technology with ultra-high pressure. The HYPERTRON® provides flow rates of 3.5 l per minute with 6,000 bar or 4.6 l per minute with 4,000 bar. Whether you want to work with two cutting heads or only with one cutting head, HYPERTRON® provides the right pressure – from 100 to 6,000 bar. Flexibility and high performance in one. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.