Electric motors - Import export

We manufacture rough or fully machined circuit breaker ring for electrical motors in copper alloys or pure copper

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

A citycoco is a cross between an electric scooter and an electric scooter. But the main feature of the citycoco is its big tyres. Our citycoco models are very varied in terms of motor power, battery power and product design! French legislation has determined that our electric scooters (citycocos) are considered to be 50 cm3. In fact, electric motors under 4000W fall into the regulatory category of mopeds.

Our H guides can be adapted to many electric actuators of the market (with threaded rod or tapped rod). Also available in anticorroding version (AluStainless Steel)

For electric cylinders ISO 15552 size 32 to 100 Selfcentering rod coupling without axial play adapted to positioning Principle of rod coupling with reduced axial play Rod coupling with adjustable axial playThe difference with the ISO 15552 pneumatic cylinder guide units is at the level of the cylinder rod coupling on these guides for electric cylinders, the selfaligning rod coupling has no axial play (or a reduced axial play) depending on the assembly carried out, these units without axial play are therefore suitable for positioning applications. For applications without positioning accuracy or with high radial loads in static, it’s possible to use the guide units for pneumatic cylinders with a guide on plain bearings, since the rod coupling has an axial play (<0,2 mm). Guides for nonISO actuators For electric actuators which are not ISO, we know how to adapt our guide units to most of the rod actuators on the market see Hguide for actuators.

Guides, delivered without motor, allows to realize systems with 1, 2 or 3 axes For LinMot® motors P0123, P0137, P0148 Stainless steel version for *SSC motors Presentation of the range of guides for LinMot® motors These guides are intended exclusively for cylindrical linear motors of the LinMot® brand and are broken down into 5 families LB modules for pick and place manipulators LE modules Gantry LR LH guide units comparable to guide units for pneumatic cylinders Guides in stainless steel LX and LW for motors * SSC Special features of the LE and LB modules On LE modules, for vertical applications, it’s possible to have a mechanicalpneumatic brake or a LinMot MagSpring. The LB23 module is equipped with pneumatic balancing (antifall in the event of a power outage but also for high speed by eliminating the impact of gravity).

Lifting table for electric motor Fixing with its reinforced end for vertical using Drived by ballscrew or leadscrew Guided by 2 rods on ball bushings (or plain bearings in leadscrew version) Motor adaptation for lifting table These lifting tables are delivered without motor, but the adaptation of your motor can be done by us. Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts. Presentation of the lifting tables to be motorized The trapezoidal screw version is irreversible and the axial precision is <0.15 mm (in practice 0,02 to 0,10 mm). The ballscrew version is reversible and the axial accuracy is <0.07 mm. The maxi stroke is 300 mm, and any intermediate stroke can be produced. Assembly of tables in XZ, YZ or XYZ systems For a crossed table XZ

Positioning table for electric motor Guided by 2 rods on ball bushings Motor adaptation on linear table These ballscrew tables are delivered without motor, but the adaptation of your motor can be done by us. Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts. Tables with ballscrew for motor The ballscrew is reversible and the axial precision of these tables is <0.07 mm. The maxi stroke is 400 mm, and any intermediate stroke can be produced. For a XY cross table, the tables are mounted on each other directly by the body with option 308922* (smooth holes are made in the body of a table). For less precise positioning applications, these tables are available with trapezoidal screw.

Positioning table for electric motor Guided by 2 rods on ball bushings (bronze bearings on request) Motor adaptation for linear table These leadscrew tables are delivered without motor, but the adaptation of your motor can be done by us. Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts. Trapezoidal screw tables for motor The trapezoidal screw is irreversible and the axial precision of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). The maxi stroke is 750 mm, and any intermediate stroke can be produced. For a XY cross table, the tables are mounted on each other directly by the body with option 308922* (smooth holes are made in the body of a table). For more precise positioning applications, these tables are available with ballscrew.

Advantages IP55 fully sealed splash-and dust in an industrial environment. More compact: gains in size and weight. Good resistance.

Advantages High-resistance: IP 55 motors with aluminum frame High efficiency: IE2 and IE3 class on direct on-line and inverters, NEMA Premium. Compact: Space-saving. General applications Available on short delivery.

USE : To descale new rails before stepping-up.(scale acts an insulator). ADVANTAGES : Simple and efficient machines to remove scale (carbon deposits) Portable Machine equipped with : - 1 Sensitive Lowering Adjustment Device - 1 Folding Wheel It can be use as : RAIL HEAD SCRUBBER MACHINE Equipped with : - Metal Descaling Brush Ø 120 mm made in hardened Steel Wires - 4-stroke petrol engine 4 KW - Ref. NB-1D - Triphase 220/380 V Electric Motor - Ref. NB-1DE - Weight 54 Kg Equipped with : - Lamella Brush Ø 250 mm Rod - 4-stroke petrol engine HONDA 4 KW - Ref. NB-2D - Triphase 220/380 V Electric Motor - Ref. NB-2DE - Weight 47 Kg RAIL GRINDING MACHINE Equipped with : - Flat Grinding Wheel Ø 150 mm (other Ø on request) - 4-stroke petrol engine HONDA 4 KW - Ref. NB-1M - Triphase 220/380 V Electric Motor - Ref. NB1-ME - Weight 54 Kg

MANUAL TROLLEYS MOTOR DRIVEN TROLLEYS AND SPECIAL MACHINES ELECTRIC MOTOR • Mains supply • Traction battery THE MODELS CAN BE IN VERSIONS FOR 1/ driver accompanying 2/ remote control by wire or radio

PERFORMANCE/BATTERIES: Lifting motor 2.2 KW Traction motor 0.75 KW Travel speed with/without loads 4.1/5.6 km/h Lifting speed with/without loads 81/121 mm/s Descent speed with/without loads 103/105 mm/s Permissible slope with/without loads 3/7 % Battery 2x12v 80Ah Autonomy 2/3 hours.