Carbon - Import export

M.E.G.A. S.p.A. has always stood out for its multitechnological capabilities and highperformance manufacturing, efficiently and flexibly carrying out the entire production cycle of each pipe, starting from forging through to the final testing phase and any inherent certification. Thanks to continuous investments in new technologies, M.E.G.A. is able to obtain seamless pipes from a forged bar up to 11,000 mm in length and 1,400 mm in outside diameter. The special machining process enables M.E.G.A. to produce special seamless SMLS pipes as thin as 20mm (depending on the other dimensions) as well as large diameters. Pipes can be manufactured from carbon steel, stainless steel, duplex and superduplex stainless steel, and can be plated with CRA material (typically UNS N06625 or 316L) to ensure corrosion resistance. DSS and SDSS pipes can be produced to be Norsok M650 compliant.

M.E.G.A. S.p.A. has always stood out for its multitechnological capabilities and highperformance manufacturing, efficiently and flexibly carrying out the entire production cycle of each branch fitting, starting from forging through to the final testing phase and any inherent certification. Among the branch outlet fittings, the socalled MEGALETS stand out, selfreinforcing branch outlets with a traditional 90° conformation to the main pipeline. Depending on the different configurations, they are divided into LATROMEGALET that can be installed to obtain a branch outlet with an angle other than 90°. ELBOWMEGALET that can be mounted on a curve. INSERT MEGALET that can be welded directly inside the main pipe. All these types can be supplied with butt weld (BW), socketweld, threaded and also flanged ends.

Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint.

Ultrablade® X fabric solutions leverage Owens Corning’s proprietary Hybrid Fabrics, that are specially designed to combine Glass and Carbon fabrics to provide unique advantages for superior performance. PRODUCT BENEFITS Higher stiffness Scalable performance Superior fatigue resistance Reduced cost over carbon materials Suitable for incumbent resin infusion process

Anti-shrinking, anti-carbonate, thixotropic, fibre-reinforced anti-carbonate mortar based on special resistant sulphate cements, in compliance with EN 1504-3 Class R3 or R4-CC, with high mechanical resistance and high adhesive power on steel and concrete. Waterproof and insensitive to chemical attack, resistant to sulphates. It is applied for the recovery of deteriorated concrete and the reinforcement in general of concrete. INTORIS MT is specifically thixotropic for spray or trowel restoration for vertical restoration operations. Available in R3 or R4-CC class. Available type "P" to be used without protective treatment to eliminate the armor stops. FPC 0925 production process certificate.

Data sheet Product The “Maxi-Carbo” activated carbon filter is designed for treating effluents with high levels of Volatile Organic Compounds (VOCs). The filtering unit is characterised by a completely welded steel structure equipped with one or two vertical beds of active carbon. Carbon is loaded from above through a door, while the depleted carbon is unloaded from below through a slide gate. The particular geometrical shape permits easier and faster operation of charging and discharging of the active carbon. Operating principle The “Maxi-Carbo” activated carbon filter is suited with one or two vertical carbon beds. The air flow mixed to VOC passes through the vertical carbon bed located inside the “diamond-shape” structure. Thanks to the optimized contact time the vertical carbon bed absorbs the VOC released from the air flow. The filter is not equipped with pre-filtration and therefore any possible solid particles in the air must be treated beforehand with other filtration...

Data sheet Product The CA model is designed to reduce Volatile Organic Compounds with no high concentration and for applications which are not particularly hazardous. The units for this model were designed in a modular way in order to satisfy all possible needs in terms of capacity and possible space limitations. They may be used both as individual filtering units and as post-filtering units together with mechanical (pocket filters) and electrostatic filtration equipped with centrifugal fan in CA M version. Thanks to the small cartridges, which each contain 3 Kg of carbon, periodic maintenance operations for substitution are quick and easy. Operating principle The polluted air is channelled to and collected in the mechanical pre-filter where the larger sized physical pollutants are deposited. The air is pre-filtered through cartridges containing activated carbon where it deposits the various volatile pollutants. Industry sectors AGRI - FOOD SURFACE...

Data sheet Product The AERCARBO filtering unit was designed to filter pollutants that contain dust, solvent vapours and pollutants that are especially volatile. The AERCAB0 unit has a painted sheet metal panel structure that is bolted together. The cartridges containing approx 48 Kg of active carbon permits a good level of absorption. The filtering unit is also available in AERCARB0 M version which is equipped with the centrifugal fan. Operating principle The polluted air is channelled to and collected inside the plenum located in the lower part of the unit. The air rises and immediately meets the mechanical pre-filters where the larger sized physical pollutants are deposited. The pre-filtered air then rises up through the cartridges containing activated carbon and deposits the various volatile pollutants. Industry sectors AGRI - FOOD SURFACE THREATMENTS RECYCLYING V.O.C. PLASTIC MOLDING