• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • light bar

Results for

Light bar - Import export

United Kingdom

Light Bar Series with amber/white/green/red/blue colours available. ECE R10/R65 Approved (Blue/Red/White/Green R10 Only) 12v/24v IP65 2 Year Warranty 3W LEDs 17 Flash Patterns incl. controller Mounting brackets included. Range of sizes available: 72LEDs = 570mm x 299mm x 95mm 102LEDs = 870mm x 299mm x 95mm 132LEDs = 1170mm x 299mm x 95mm 162LEDs = 1470mm x 299mm x 95mm 192LEDs = 1770mm x 299mm x 95mm

Turkey

- Aluminum main body and polycarbonate parts - Resistant to enviromental conditions and high speed - Protection battery life with low current consumption - Custom designed multicolor fresnel lens that provides exceptional brightness and visibility with 3 high power LEDs for each module - Wide area illumination with 6 power LED street lighting and projector modules, each of which is 3 Watt - Unlimited color possibilities with RGBW LED - Optional RABW LED application - Possibility to operate Traffic Cleaning mode with warning modules and connected projectors with 6 modules located at the front of the lightbar. - Possibility to operate Amber-colored Traffic Divert Mode in 5 different modes with 8 modules located at the rear of the lightbar. - Night / Day sensor providing automatic light adjustment with the amount of ambient light in addition to manual and closed settings -Rapid adaptation to any vehicle with mounting brackets

France

Verified by Europages

Inspired by billiard pendant lights, the Billard Coursive will obviously be right at home above a billiard table but also above a dining room or kitchen table or even a bar. Light is subtly cast downwards for a directional and soft beam.

Request for a quote

France

Verified by Europages

Inspired by billiard pendant lights, the Billard Aravis will obviously be right at home above a billiard table but also above a dining room or kitchen table or even a bar. Light is subtly cast downwards for a directional and soft beam.

Request for a quote

China

Verified by Europages

Product model :X-7600 Magnification :200X Detection accuracy :5um The use of the world's top HAMAMATSU Japan X-ray source can easily identify the semiconductor packaging gold wire bending gold wire fracture, large load table, can be placed in a large industrial control board ultra-long LED light bar applicable to various fields of electronic products

Request for a quote

Italy

Verified by Europages

Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.

Request for a quote

Italy

Verified by Europages

ME SERIES HI - single bar 5 mm. (suitable for medium thick envelopes in PE, polypropylene, coupled light) Welders Series ME HI 5 mm with closure lever, allowing the sealing of heat sealable plastic bags with thickness up to 0.40 mm total. The models ME HC 5 mm are equipped with cutter for trimming of the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. The sealers ME HC are available in sizes 300, 400 and 500 mm. This series of sealers makes a sealing of 5 mm, very beautiful and suitable for food bags or if you want a more valid and robust sealing than the standard 2 mm. This sealers have a impulse sealing (resistance heats for a few seconds) and a timer for adjusting the sealing time. The sealing cycle is indicated by an indicator light. With manual sealing bar, sealing width 5 mm., Maximum thickness of 0.20 mm weldable. (mm. 0.40 total).

Request for a quote

Italy

Verified by Europages

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm).

Request for a quote

Turkey

Verified by Europages

The façade works of this chocolate shop, which is a chain cafe, including the entrance door, illuminated signs, special lighting fixtures, bar section, decorative metal ornaments, separators, bespoke hood and other designs that create the brand value have been and continue to be produced and installed by DEHA.

Request for a quote

China

Housing: rugged and light-weight aluminum alloy functioning as platformfor light bars and driver compartment, and lighting control interfaces (e.g.Zhaga sensor ready connector, NEMA receptacle). Mounting bracket: powder-coated aluminum alloy. Lightbars: extrusion aluminum heatsink, aluminium PCB with 18 LEDs mounted, UV resistant polycarbonate 18-in-1 optic lens cluster, micro terminal block on PCB, and connector for toolless wiring. IP67 and IK10 rated. Hardware: 304-grade stainless steel nuts.

Request for a quote

United Kingdom

Light-duty ball transfer units are assembled from pressed sheet steel components, except for the LP series which are machine turned from an acetal solid bar. All light-duty ball transfer unit designs feature a hemispherical cup for the recirculation of the small supporting balls. This allows a smooth rotation of the protruding, load-bearing ball. All light-duty ball transfer units (except LP) feature a heat-treated support cup which is resistant to wear.

Request for a quote

Belgium

Technical Engine 4.200 cc 6 cyl. diesel 131 HP Manual gearbox 5 gears 4x4 Fuel capacity 90 + 90 L Tropical specifications Interior Fabric seats 3 places Separated air-conditioner Airbags Radio CD Exterior 2 Side doors + 2 back doors Tires 7.5 R 16 Snorkel/tuba Side steps Flash light bar Siren Ambulance equipment Separated ambulance compartment Lightning system rear Closet Aspiration devise Humidifier and oxygen debit meter Mobile stretcher ‘Roll-in’ bed First aid bank Closet department for medical tools First aid kit Ventilation system rear Fire extinguisher

Request for a quote

Netherlands

Each individual emitter pin of the MaxION anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. The rugged MaxION static neutralising bar has a reinforced profile that minimises damage due to accidental bending. The ground reference is embedded in the reinforced profile. The slide slot on the backside of the MaxION enables the user to position the mounting bolts as required, allowing greater mounting flexibility. After cleaning the precision emitter pins with a brush you can sweep the contaminants out of each light-angled end of the bar easily. Features - Medium working distance: 400 mm max. - Minimal risk of deflection and deformation of the anti-static bar due to glassfiber reinforced plastic profile - Shockless touchable emitters - Compact

Request for a quote

Netherlands

Performax Easy Ex: for explosion hazardous environments Compact high efficient static neutralising for explosion hazardous environments . The Performax Easy Ex has an integrated high voltage power supply and requires only a low voltage input of 24V DC. A two color high bright LED visualises bar ON (green) or bar FAULT (red). On the standard connection cable an additional wires for remote on/off contact is available and a signal indicating high voltage O.K. The Performax Easy Ex bar has light slanted ends and protection classification IP66 which allows easy cleaning. The aluminum profile offers a very rugged structure even up to 3 meters. Universal mounting brackets are supplied for various mounting options.

Request for a quote

United Kingdom

Available with brackets for permenant or magnetic mount ECE R10/R65 Approved 12v/24v IP65 2 Year Warranty 3W LEDs x 56 26 Flash Patterns Cable with cigarette plug included

United Kingdom

Available in 1 bolt, 2 bolt or magnetic fixings. Now includes a synchronisation wire, to provide a low-cost alternative to a light bar. ECE R10/R65 Approved 12v/24v IP65 2 Year Warranty 3W LEDs x 30 26 Flash Patterns Inc. synchronisation wire Cable with switch included with bolt fixing

Belgium

Iris Reflectors For Ultimate Distance IRIS reflector technology Vision X Lighting introduces the Xmitter Prime Iris Light Bar series or XPR. This new generation of LED Light bars features two features not seen on a Vision X light bar before, IRIS reflector technology, and dual mounting, both patented feet mount and end mount brackets are included standard. The XPR series is launching with 7 different lengths, ranging from 11.5” to 51”, and a single beam option. Xmitter Prime Race Series Usage Guide The 10-watt LEDs in these light bars are paired with IRIS reflector technology to project usable light further than ever before possible. IRIS reflector technology was first introduced with the Optimus Series in 2012, using deeply recessed reflectors to achieve unmatched distance in a light of that size. The XPR light bars create an unmatched distance option in LED Light Bars. The 27 LED light bar produces 1,600ft of usable light. Another new innovation in these light bars is the...

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Belgium

Race Series Halo For Ultimate Distance Output IRIS reflector technology The XPR-H Series Light Bar uses a high intensity LED that allows the beam to take full advantage of the Iris Reflector and project the light up to 75% further than the XPR series. Designed to outshine and outlast the competition. Xmitter Prime Race Halo Series Usage Guide The 10-watt LEDs in these light bars are paired with IRIS reflector technology to project usable light further than ever before possible. IRIS reflector technology was first introduced with the Optimus Series in 2012, using deeply recessed reflectors to achieve unmatched distance in a light of that size. The XPR-H light bars create an unmatched distance option in LED Light Bars. The 27 LED light bar produces 3,773ft of usable light. Another new innovation in these light bars is the use of tilting reflectors, allowing the outer 3 LEDs on each end of the light bars (sizes above 6 LED) to tilt out to create a mixed or combo beam pattern....

Belgium

Race Series Spot Beam For Ultimate Distance Output IRIS reflector technology The XPR-S Series Light Bar uses a high intensity LED that allows the beam to take full advantage of the Iris Reflector and project the light up to 75% further than the XPR series. Designed to outshine and outlast the competition. Xmitter Prime Race Spot Beam Series Usage Guide The 10-watt LEDs in these light bars are paired with IRIS reflector technology to project usable light further than ever before possible. IRIS reflector technology was first introduced with the Optimus Series in 2012, using deeply recessed reflectors to achieve unmatched distance in a light of that size. The XPR-S light bars create an unmatched distance option in LED Light Bars. The 27 LED light bar produces 3,773ft of usable light. Another new innovation in these light bars is the use of tilting reflectors, allowing the outer 3 LEDs on each end of the light bars (sizes above 6 LED) to tilt out to create a mixed or combo beam...

Belgium

double Stack led Light bar The Xmitter Prime Double Stack features 4 rows of 5 watt LED to provide powerful output. Making this this most powerful light bar per inch. Xmitter Prime Xtreme Series Usage Guide 5 WATT XTREME LIGHTING The Xmitter Prime uses 5 Watt LED for the combination of the most distance and most intense light output. PRIME DRIVE TECHNOLOGY With Prime Drive, Electronic Thermal Management maintains a safe operating temperature for the light without sacrificing output. DIMMING CAPABILITY Pulse Width Modulation circuitry flashes the LED faster than the human eye can see to achieve dimming capability. EXTRUDED ALUMINUM Extruded 6061 Aluminium is used to achieve an ingress Protection rating of IP-68, creating a light bar with unmatched durability.

Belgium

Original Light Bar With Seamless Beam Original Light Bar With Seamless Beam INFRARED MODELS 3 Watt Infrared LED Lights are Available in 850 and 940 Nanometers Infrared LED’s enhance night vision capabilities for military personnel, and for infrared vehicle lighting, security lighting applications, and other covert general area infrared lighting. Vision X infrared lighting has been trusted by only the best like the U.S. Border Patrol, the Department of Defense, and the U.S. Military. Xmitter Series Usage Guide 3 Watt Infrared LED IR850 The IR850 is slightly detectable to the naked eye with a reddish glow when the LED’s are activated. The LED only emits a red light one to two inches. The IR850 holds the advantage of illuminating brighter than the IR940. If night vision illumination is your top priority than the IR850 LED will be the best available option. IR940 The IR940 is virtually invisible to the human eye while activated with a very faint purplish glow. The IR940 LED emits...

Belgium

Original Light Bar With Seamless Beam Original Light Bar With Seamless Beam INFRARED MODELS 3 Watt Infrared LED Lights are Available in 850 and 940 Nanometers Infrared LED’s enhance night vision capabilities for military personnel, and for infrared vehicle lighting, security lighting applications, and other covert general area infrared lighting. Vision X infrared lighting has been trusted by only the best like the U.S. Border Patrol, the Department of Defense, and the U.S. Military. Xmitter Series Usage Guide 3 Watt Infrared LED IR850 The IR850 is slightly detectable to the naked eye with a reddish glow when the LED’s are activated. The LED only emits a red light one to two inches. The IR850 holds the advantage of illuminating brighter than the IR940. If night vision illumination is your top priority than the IR850 LED will be the best available option. IR940 The IR940 is virtually invisible to the human eye while activated with a very faint purplish glow. The IR940 LED emits...

Belgium

Single Stack led Light bar Original Light Bar With Seamless Beam The original LED bar, the Xmitter is rugged and powerful for racers and race enthusiasts alike. Featuring a patented mounting system found throughout the Xmitter Family, a seamless beam pattern and low power consumption, it is easy to see why the Xmitter is chosen by US Homeland Security, Off Road Racers and NASA. Xmitter Series Usage Guide 3 WATT LED The Xmitter utilizes 3 Watt LED driven at 80% efficiency for high output. 3 Watt LEDs produce 180 raw lumens per LED. TIGHT LED CONFIGURATION A tight LED footprint allows more optical control to achieve more precise beam patterns and further distances. TRUSTED EVERYWHERE NASA, US Border Patrol and United Launch Alliance have in common that they trust the Vision X Xmitter Bar. COLOR LED AND INFRARED LED The Xmitter can be configured with amber, red, blue, green and infrared LEDs upon special order.

Belgium

Single Stack led Light bar Xtreme Output for Increased Distance and Spread The Xmitter Prime Xtreme is the newest generation of the original Xmitter Bar packed with new technology. It features Prime Drive for electronic thermal management and dimming capability. 5 Watt LEDs increase light output to 528 lumens per LED. Xmitter Prime Xtreme Series Usage Guide 5 WATT XTREME LIGHTING The Xmitter Prime uses 5 Watt LED for the combination of the most distance and most intense light output. PRIME DRIVE TECHNOLOGY With Prime Drive, Electronic Thermal Management maintains a safe operating temperature for the light without sacrificing output. DIMMING CAPABILITY Pulse Width Modulation circuitry flashes the LED faster than the human eye can see to achieve dimming capability. EXTRUDED ALUMINUM Extruded 6061 Aluminium is used to achieve an ingress Protection rating of IP-68, creating a light bar with unmatched durability.

China

France

Our pro fi les represent a major advance in the field of plexi-faced box letter signs. This innovative process , combining productivity and irreproachable fi nish, makes it possible to produce box letters with luminous plexiglass faces without having to resort to the listel for the faces or to the fixing screws for the backs. The edge and the plexiglass face are assembled by gluing (translucent glue) or implemented with the resin machine. The assembly can then be simply clipped onto the bottom using the stainless steel EasyClip clipsspecially designed for effective and discreet grip. The aluminum profiles, of different heights, have been specially designed to adapt to Domino Sign LED lighting modules. 3m bars Prepainted in 6 colors 4 different heights (35, 50, 60 and 80 mm)

Request for a quote

Germany

LED-bar light from with diffus and even light: Can used as a diffuse back lighting for line images and for diffuse top lighting. You can also use as wash down light ore low-angle light. LED-bar light with 30 degree beam angle: Can uses for bright lighting with short light distance and for lighting with large camera distance. In the led barlight we can integrate an switch input with opto-coupler. So you can switch the barlight from PC or SPS. LED-line light for line camera systems and dark field illumination: Light with only 3 degree beam angle, hight quality cylindrical lens. One light for various working distances. So you can use for line cameras for direct lighting, but also for a wash down light. LED-Spot MINI and Maxi: The small radiators with high capacity can be used universally. The already installes power controls and hte gate inputs make the handling very easy and sucure. You can use as spot light, but also as wash down light. The Spots will also will made in cusomer's specification. The same is valid for very big areas with break throughs. planistar is building a lot of standard lightings, but also customized lights. So we can build a special lighting for your application.

Request for a quote

Germany

LUMIMAX® Bar Lights generate an elongated illumination of the test object, due to its constructional shape. The illumination radiation characteristics can be influenced by using various ancillary lenses. LUMIMAX® lightings of the LB-series are equipped with high-quality Power-LEDs and therefore guarantee an extremely bright homogeneous illumination – even with large operating distances and short exposure times. These continuous or flash lightings are applied combined with matrix and line scan cameras in code-scanning applications, as Dark Field Lights, for illuminating large object fields etc.

Request for a quote

Germany

The design of LUMIMAX® LED bar lights generates the optimum illumination for elongated test objects. With power LEDs in conjunction with interchangeable ancillary lenses, these universal lights are suitable for example for dark field or bright field applications. Products in the compact LSB series are designed for applications that demand perfect illumination in restricted installation environments. Another special feature is the innovative mounting solution, which allows one to four bar lights in the LSB series to be incorporated in the square.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free