Environmental protection - machines and equipment - Import export

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

With the new G 1910-02 and G 1910-20 CO₂ handheld measuring devices users benefit from a compact CO₂ monitor with integrated sensor and an optical and acoustic alarm function that has an impressively long rechargeable battery life, easy charging and a very wide measuring range.

Fast production Fast cooling system 2 types of grease production in one circle The most homogenized product Flexible design capacity from 5 l to 3000 l of reactors Compatible with the production of all types of greases

All our barriers comply with the applicable health and safety regulations. In addition to protecting walls, barriers can separate and protect production lines, racks, and parking lots, and also designate zones for pedestrians, guarded, busy, or dangerous areas. Protective fenders have various uses, but their main task is to prevent damage. (The goods directly from the manufacturer – excluding brokers – best price and prompt delivery time.)

For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion group IIA1 (old: I) with a maximum experimental safe gap (MESG) ≥ 1.14 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. An installation into horizontal and vertical pipes is permissible. To detect a thermal load on the KITO® flame arrester element in operation a temperature sensor can be implemented as an option into the flame arrester body. Proof against “stabilized burning” and withstand this up to a max. burn time BT = 1.0 min.

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 1083 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1460 x 863 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1300 x 435 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 800 x 800 x 455 -Retention capacity in l: 222 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -100 mm ground leeway -galvanized grid (load capacity 650 kg/m²) -conical construction -can be stacked -for use with a pallet truck or forklift truck -shipping unit: 15 units on a europallet -for flammable liquids of the GHS-categories 1-3 -for water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 800 x 360 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 620 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4