Sensors - Import export

Key-Features ■ Configurable output signal (4...20 mA, 0...20 mA, 0...5 V, 0...10 V, ±5 V, ±10 V ■ Very low residual noise ■ Integrated cable break detection

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Registration of inclination in the gravitation field using MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via a controller. Data output is carried out via the CANopen interface or as an analogue signal. The inclination sensor has a stable aluminium housing (optionally stainless steel). Slots are available for mechanical alignment (up to approx. ± 7.5°). In the case of CANopen, one connector or one male/female connector combination can be selected optionally for connection purposes. Casting measures in the housing lead to the achievement of protection class IP 69K, e.g. for use under water.

Registration of inclination in the gravitational field by means of MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via controllers. MEMS sensors are integrated circuits manufactured using silicon bulk micromechanical technology. Double capacities are formed with the aid of moveable micromechanical structures. If these structures are deflected in the case of acceleration, e.g. gravitational acceleration (g), this results in capacity changes, which are registered and further processed using measuring technology. The output voltage follows the function U ~ g * sin α. In this case, the angle α is the sensor's inclination angle measured against the g-vector. These sensors measure precisely, have a long service life and are very robust. The measuring axes operate independently of each other.

Registration of inclination in the gravitational field by means of MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via controllers. The housing-based inclinometer (model NBN 65) has a stable aluminium housing (optionally stainless steel) and is highly-resistant to vibration and shock. One or two connectors/socket in the case of CANopen can optionally be selected for connection. Casting measures in the housing lead to the achievement of protection class IP 69K, e.g. for use under water.

Registration of inclination in the gravitation field using MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via a controller. Data output is carried out via the CANopen interface or as an analogue signal. The inclination sensor has a stable aluminium housing (optionally stainless steel). Slots are available for mechanical alignment (up to approx. ± 7.5°). In the case of CANopen, one connector or one male/female connector combination can be selected optionally for connection purposes. Casting measures in the housing lead to the achievement of protection class IP 69K, e.g. for use under water.

CALIPRI C12 is a gap and flush measurement system that can be fully integrated into the line and is used for full checks of automobile bodies. The system can be used with standard industrial robots as well as HRC lightweight robots. By using CALIPRI C12 in your production line, you are relying on highly-precise measurement results without any mathematical approximation methods as well as globally unique automatic rotation and tilt correction. The patented CALIPRI measurement method is used here – a further development of the laser light section technology. The results from the automated measuring system can be compared with the data from the mobile gap measurement devices (CALIPRI C10/C14, CALIPRI C11/C15) due to cross-platform evaluation methods in order to detect deviations in the process and to derive appropriate measures from this.

CALIPRI C11 and CALIPRI C15 are hand-guided gap & flush measuring system for taking continuous inline measurements . The systems are designed for extremely simple operation and most accurate results. Choosing CALIPRI means you can rely on a high-precision measuring system in your production line. The device uses the patented Calipri principle, a latest-generation laser light section technology with tilt and pitch correction that is the only one of its kind in the world. With just a short swiveling motion, the user can capture the entire profile of a gap from multiple perspectives, thus eliminating the need for imprecise mathematical approximations. The measurement results are then displayed on a visualization monitor, where deviations in tolerance are highlighted in color. You have the choice: The wireless Calipri C15 systems with or without trolley for flexible use, or the stationary Calipri C11 systems with linear or 360° cable routing.

With the CALIPRI C14 wireless hand-held measuring device, you can evaluate gaps, edges and design lines with high accuracy and in seconds. The measurement is carried out using the patented Calipri principle - a further development of the laser light section method with automatic tilt and roll correction - which eliminates possible misalignment of the sensor. The user defines the position, evaluation strategy and tolerances of the individual measuring points. The measurement is then carried out with a swivelling movement of the sensor. The sensor records the contour from different perspectives - down to the depth of the gap or completely around a fold edge. The software then evaluates the gap dimension, the flush and the radii. The measured values are displayed on the tablet PC and sensor and compared with predefined limit values using a traffic light system. The measurement data can then be printed as a report or exported as a data record and transferred to existing databases.

CERTO Highlights: - High degree of protection - Compact design - Ball-bearing guide High degree of protection - Protection up to IP67 Compact design - Station width of 13 mm Ball-bearing guide - Ball-bearing guide with low friction - High-precision measuring loop - Rugged design Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

METRO highlights: - High accuracy - High repeatability - Various gauging force variants - Long measuring ranges of up to 100 mm High accuracy - System accuracy of ±0.2 µm High repeatability - Repeatability is typically < 0.03 µm for a measuring range of 12 mm ZERODUR scale - Scale expansion is close to 0 ppm/K at between 0 °C and 50 °C Actuation by cable-type lifter - Defined velocity of the plunger - No counting errors - Precision mechanics - Ball-bearing guide with low friction - High-precision measuring loop Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

ACANTO Highlights: - Absolute measuring method - Protection up to IP67 - Online diagnostics - Serial data transmission with CRC Absolute measuring method - Position value is available immediately after switch-on - No counting errors - No reference runs necessary, because the measured value is always available Compact design - Station width of 15 mm EnDat 2.2 interface - Additional data on the status of the length gauge is available (diagnostics, warnings, alarms) - Serial data transmission with CRC Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

Pressure sensor for analogue filling level measurement Supply voltage 24 V DC Output of an analogue measuring signal 4 – 20 mA Pressure ranges depending on tank height 0 – 50 / 200 or 400 mbar Safe at several times over-pressure Explosion protection according to ATEX

Magtrol's new PSD hand-held indicator is a stand-alone unit powered by 3 AA batteries or via USB. It is very compact (~160 x 80 x 50 mm) and can be easily carried and used on a civil engineering site, in a research & development office or laboratory as well as in production shop. Its case is ergonomic, waterproof (IP54) and protected by a rubber shock absorber. It is suitable to any type of strain gauge transducers, being a load cell, a load pin or a reaction torque sensor. The internal amplifier can process signal range of ±0.3 ... 5 mV/V. The new PSD Portable Display is very flexible and complies with the highest specification in terms of accuracy (0.01%) and measurement frequency (1600/s). It allows to store up to 16 programmable measurement ranges which can be configured either directly on the unit or via its USB interface and dedicated software (included). Multiple force or torque transducers can be connected for which actual data as well as the ... read more: www.magtrol.

The Series AFS Air Flow Sensor is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork. It has an aero-dynamic elliptical shape resulting in a minimum pressure drop and amplified differential pressure signals which allow accurate measurement of air velocities from 300 fpm to 5000 fpm (1.5 m/s to 20 m/s). It includes multiple sensing points aligned in line grooves to measure total and static pressure. It is easy to install and cost effective. Series AFS Airflow Sensors are perfect for VAV Retrofits. The AFS is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork.

DWL-2000XY, DWL-3000XY & DWL-3500XY are 2-Axis precision Digital Levels with high accuracy and wide measuring range of levelling, angle, alignment & vibration measurements, capable of real-time remote USB/wireless measurement & data logging. The accuracy performance is verified by accredited calibration & test bodies in USA, Japan & Germany traceable to NIST, JIS & DIN. These instruments are exceptionally engineered to greatly simplifying the task of precision engineering professionals & tradesmen in installation, setting up & maintenance of very high precision CNC machines, test instruments & alignment-sensitive equipment.

The ideal vibration data logger for capturing and monitoring vibrations, shocks, and impacts. With superior battery life and up to 128 GB of memory, the ReLog is the perfect tool for monitoring vibrations in most environments. It has been designed to be extremely easy to handle and by the touch of a button, you will be up and running and measuring with up to 25,000 Hz sampling rate. This equals to more than 60 billion data points! With its waterproof housing (IP67) there really are very few limitations to where you can use the ReLog! And when you’re done measuring the included software will make sure you have perfectly structured files that are easy to analyze and work with.

Broadley-James offers the widest range of autoclavable and steam sterilisable pH & redox electrodes available on the market today. Electrodes are available in a 12 mm body with a PG13.5 mounting thread and insertion lengths up to 420 mm. Connector options are industry standard S8, K9 or Variopin in both straight and right angle formats. The new F-800 Series offers a zero drift measurement with a noise resistant design and enhanced regulatory documentation.