Results for
France
A qualified and experienced team that is fully involved in the projects of each and every one of our customers assists and advises you for studying your specific needs. We have the capabilities to produce moulds tailored to your specifications and unique needs. Our in-house machine shop provides crucial support, producing and optimising your production tools but also for the realization of rapid prototyping. Thanks to the expertise and commitment of its employees, Progress Silicones guarantees top manufacturing quality, competitive prices and fast response times.
Request for a quoteTurkey
Istanbul Dokum has hand moulding system. Alfacet and Carbon Dioxide resins are used with mixer which has 10 tons capacity sand output per hour.
Request for a quoteFrance
Since it was founded in 1979 STEEC offers, has been offering the service of machining parts for moulds and dies for all types of industries based on wire spark erosion cutting in particular. Because of this STEEC is recognized for its expertise in this field of activity both in France and in Europe as a whole.
Request for a quoteGermany
ALWA UP GELCOAT is an aluminium filled polyester surface resin with a temperature resistance of 110 °C. Pot life is approx. 20 – 30 min. at room temperature, when using 1 – 2 % hardener (art. no. 3150001). The top layer can be polished to high gloss.
Request for a quoteGermany
The solvent combination contains methyl methacrylate (MMA) and is used for diluting and cleaning.
Request for a quoteGermany
Release agent H1 (art. no. 9519000) is used to release patterns and moulds. Release agent H1 is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a release film is formed.
Request for a quoteGermany
ALWA BARRIER COAT is a laminate resin, which is applied to protect the gelcoat for instance with glass fleece (e.g., ALWA MOULD COAT and ALWA UP GELCOAT).
Request for a quoteGermany
ALWA EPF 10 is a temperature-resistant, steel-filled gelcoat based on epoxy resin. It is used to produce temperature and abrasion resistant surfaces for vacuum, PU foam, thermionic moulds and heating plates, among others.
Request for a quoteGermany
ALWA EPT 210 is a laminate and backfilling resin. Laminates can be produced with ALWA EPT 210 in order to manufacture glass fibre plastic parts, gauges, templates, moulds and applications with diverse fillers. ALWA EPT 210 is an epoxy resin that has a low viscosity and a light yellow colour. Under exothermic reaction, it cures in connection with the light yellow hardener H 10 at room temperature. The mixture shows a low viscosity and is particularly appropriate for laminating layers of up to 8 mm. For thicker laminates the application of layers must be interrupted several times in order to avoid too high reaction temperatures in the laminate.
Request for a quoteGermany
ALWA acryl sealer is used to seal porous surfaces, such as wood, gypsum and rigid foams (not suitable for polystyrene foam). The primer dries in the air and forms a strong film. Apply a thin layer of ALWA acryl sealer evenly with a brush. If 3 % hardener powder is added, the curing process can be reduced to approx. 30 min.
Request for a quoteGermany
The mould construction fleece is particularly well tensile and conformable. It is also ideally suitable for complicated parts and moulds. Since this fleece is produced of 100 % polyester fibres, it can be processed with epoxy and polyester resin without any problem. The resin consumption is approx. 1.5 – 2 kg/m² depending on the application. It is ideal for producing free forms.
Request for a quoteGermany
225 gr. spin split glass fibre mat as well as 450 gr. emulsion bound glass fibre mat are offered.
Request for a quoteGermany
Copper pipes are used as heating and cooling coils (very soft and, therefore, easy to bend).
Request for a quoteGermany
Aluminium perforated sheets are used in order to reinforce the casting resin moulds.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
ALWA release spray (art. no. 9515000) is used to release patterns and moulds. After the solvent has evaporated, a strong release film is formed. ALWA release spray may not be polished.
Request for a quoteGermany
ALWA release lacquer (art. no. 9510000) is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend to spray on approx. 2 to 3 layers. After approx. 20 min. a strong release film is formed. The drying process can be accelerated by hot air.
Request for a quoteGermany
Master patterns must be treated with ALWA surface tension remover (art. no. 9500000), so that the ALWA release lacquer does not roll off. ALWA surface tension remover is applied in a thin coat with a brush or a sponge. After approx. 10 min. the solvent is evaporated and ALWA release lacquer can be applied.
Request for a quoteGermany
ALWA plasticine is used to repair master patterns, round off sharp edges, seal casting boxes and build a parting plane.
Request for a quoteGermany
ALWA PU foam consists of component A (art. no. 9700005) and component B (art. no. 9701006) and is used, for instance, to produce displacers. The mixing ratio between component A and component B is 1 : 1.2 and the density is approx. 30 kg/m³.
Request for a quoteGermany
ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.
Request for a quoteGermany
ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown, low viscosity hardener (component B) based on isocyanate (Methylendi(phenylisocyanat)e = MDI). Two types are available with different pot life: *ALWA MOULD SLV 3 ~ 3 min. pot life *ALWA MOULD SLV 9 ~ 9 min. pot life
Request for a quoteGermany
Moulded-In Inserts are placed over core pins by an operator or a pick-and-place robot prior to the closure of the mould cavity during the plastic injection process. Moulded-In Inserts offer exceptional torque and pull-out resistance due to unrestricted plastic flow around the Insert body, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure positive positioning and perpendicularity of the Insert on the core pin during the moulding process. Series 63 is symmetrical eliminating orientation and Series 65 is the same body style in a blind ended version. SPIROL's Moulded-In Inserts are made from 2024 aluminium, a light-weight, lead-free grade. SPIROL’s Series 63 and Series 65 Moulded-In Aluminium Inserts are available in thread sizes ranging from M4 (8-32) up to M8 (5/16-18).
Request for a quoteRomania
Injection moulding of rubber and plastic. Plastic products for the vehicle manufacturing industry.
Request for a quotePortugal
Manufacturing services: Injection parts, moulds packaging - moulding services
Request for a quotePortugal
Injection moulding PET ans insuflation with the highest quality manufacturing
Request for a quoteResults for
Mould - Import exportNumber of results
678 ProductsCountries
Company type
Category