Scrap products - Import export

Compactor suitable for reclaiming expanded polystyrene packaging. Packaging is reduced to blocks which can easily be placed on pallets for inexpensive transport, storage and recycling. The compactor accepts large materials such as the packaging used by television manufacturers, food containers, etc. Packaging manually fed by the operator is crushed by breakers and then transported by a screw into the compacting chamber. The compacted polystyrene is ejected through a tube at the side.

Monitor the quality in your extrusion line, fiber production, polymer production or food and chemical production continuously in real time with the Promix Visco-P inline viscosity meter. Prevent scrap production and reduce raw material costs through active raw material management. Promix Visco-P is a true online rheometer that helps you monitor your production process and save production costs. Ask for a test unit and see for yourself! Advantages Promix Visco-P inline viscosity measurement ,Continuous monitoring of raw material quality and process conditions in real time ,Raw material cost reduction through active raw material management ,Precise inline viscosity measurement in the melt stream – without bypass ,Suitable for all viscous media ,Additional benefit of melt and temperature homogenization in the Promix melt blender, which also serves as a measuring section ,Can be integrated into any extrusion line ,Test units available

UNLOCK YOUR PROCESS Unparalleled Performance for Increased Yields and Maximum Uptime The ever increasing price of silicon wafers and demand for finished products means that scrapped wafers cost more than ever before. Thus, understanding your process and monitoring for defects has become a much higher priority in semiconductor fabrication centers. The Transpector MPH Gas Analysis System is designed to unlock your process with industry leading performance for all of your gas analysis applications to help maximize chip yields and minimize tool downtime. Combined with a low overall cost of ownership and high mean-time-between-failures, Transpector MPH helps your bottom line more than any other residual gas analyzer (RGA) on the market. INFICON has leveraged its expertise in gas analysis process control equipment to create an RGA with industry-leading data collection speed, minimum detectable partial pressure and signal-to-noise ratio. All this, without sacrificing any of the...

Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.

We have very good quality of Ceramics CPU scrap for gold recovery. We have very good quality available in stock now and ready for supply. We give at very good prices and our delivery is very prompt. We have very good quality high yield Cpu Ceramic Processor Scrap for gold recovery.We offer a wide rage of high yield gold recovery for computer scrap products and below is a list of the cpu scrap types we have. Intel 486 & 386 Cpu Intel I960 & Motorola Cpu Intel Pentium Pro Cpu AMD 486 & 586 Cpu Gold Top Cpu Gold Top & Bottom Cpu Intel Pentium 1 DLP Cpu Computer CPU Scrap CPU Ceramic Processor Scrap Scrap Ceramic CPU Scrap Ceramic CPU with Aluminum Cap Scrap Black Plastic CPU Scrap Plastic CPU’s Ceramic Pentium pro CPU 486 ceramic Huge Gold Quantity: Intel 186 / 286 / 386 / 486 / Pentium / Pentium Pro / i86 / i960 Cyrix 486 / 586 / MIIIBM 486 / 586 / 686

We supply Grade A copper wire scrap for copper production worldwide. Our copper wire scrap is cu 99%, clean and free from mixed other wires Packaging is done as lose packing or in bales of 1 ton and as per clients demand. We provide good services with free customization at no extra cost. Our company information is 100% available for your review. We respond to all your FOQ as soon as possible.

Move or dump more scrap with heavy-duty dumpers and industrial carts. PRAB’s line of industrial carts and automatic dumpers help move wet or dry metal chips, turnings and die scrap, safely and easily to and from scrap metal equipment. Customize the model and capacity cart you need with tow links, dumping frames, pouring baffles (contains cutting fluids), drain plugs, drain racks and casters designed to meet your floor conditions. Mechanical or automatic hydraulic dumpers help simplify the process of unloading carts. Improves housekeeping with efficient one-person operation Minimizes scrap handling costs Reduces production downtime

Plastic scrap Foundry scrap Post-production scrap Link, sector Rim Copper scrap The purchased scrap is subjected to qualitative analysis, including control of the chemical composition, determination of the level of contamination and radioactivity. The scrap quality assessment process is carried out by qualified employees with many years of experience.

in grades A2, A4, A5, A6 according to the chemical composition specified by the customer In addition to aluminum alloys, our sales offer also includes various types of scrap and waste that are a by-product of the production process or scrap classification: heartburn furnace steel magnesium scrap zinc scrap steel scrap

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

Planetary cutting machine for corrugated metal and PTFE hoses. Cutting results that often eliminate an additional step. This completely unique planetary cutting machine delivers almost scrap-free production and high efficiency. With a completely variable centering clamp system, all hose OD to the maximum rating for the machine can be cut. Approximate cutting time is 25 seconds for 1 ¼“ (ø DN 32). Productive and ergonomic •No dramatic flaring of the stainless steel braid •Reduces or eliminates time-consuming manual preparatory work thereby increasing productivity and lowering costs •Centering hose clamp system •Shortest cut possible from 10 cm •Minimizes personnel costs and preparatory work •No wrapping/unwrapping with adhesive tape required •Clearly laid-out user friendly software on a panel with a 6“ color display screen •Large article memory promotes productivity •Reference run for optimal positioning of the cutting blade for cutting all hose diameters CE compliant

Thermal imaging system based on the Raytek MP150 infrared linescanner. Detailed web temperature profile based on 40,000 measurement points per second Automated temperature monitoring Automated quality monitoring for ISO9000 Ensures proper web temperatures for strong film-to-substrate adhesion Enables plant operators to reduce scrap and improve profitability and product quality Quick and automatic detection of “wavy” or “running” edges, gaps, and torn edges Define product-specific configurations (recipes) Automatically analyze “automatic sector” temperature distributions Visualisation on PC Playback stored files as “movie” Multiple language support Integrated OPC server for remote system control Ethernet TCP/IP interface integrated in the line scanning system PC-independent alarm output Analog outputs 3 x 4 – 20mA Analog or digital output modules For sheet extrusion see the Raytek ES150 system.

Overbelt magnet separator for ferrous metals from bulk materials flow. Separation of ferrous scrap, removing iron impurities at production stages. Recycling waste cleaning from ferrous impurities.

ANDRITZ Kaiser provides complete circular and multi-form blank cutting lines, including feeder, press, stacker, and scrap conveyor. The production of blanks for further use in a deep drawing or embossing process imposes strict demands on the press and automation system. Precise timing and general performance are required in order to achieve competitive productivity. Due to the large amount of cutting required, a very rigid machine is needed to absorb the rebound without damaging any equipment. Finally, the tolerances of the end product call for a very precise slide movement and low frame deformation. ANDRITZ Kaiser can look back on decades of experience in the field of blank cutting lines. Our well-designed and thoroughly tested concept allows our customers to manufacture high-quality products with maximum efficiency. Our production lines for circular or multi-form blanks are characterized by the following aspects: Highly stable machine with split-design cast iron or combined...

Painting in cleanrooms according to the DIN EN ISO 14644 standard Cleanroom technology Many processes for the application of technically functional coatings for increased resistance to scratching (hardcoat), UV stability, lotus effects, anti-fog or other thin-film applications place high demands on the implementation and function of the coating plant and its components. Thanks to a modular design, optimum plants are conceived in close cooperation with customers and users that minimise faulty coatings caused by particle inclusions and the resulting product scrap or rework expenditure. The plants are designed strictly in accordance with the DIN EN ISO 14644 the standard. In designing the filter stages we orientate ourselves to a particle size with a diameter of 0.5 µm. Built-in components such as conveying equipment, robotics, application technology etc. are adapted by careful selection of the appropriate task. A further criterion in the conception of the plants is fast and efficient cleaning and maintenance, in order to obtain long plant operation times with a constantly good yield. Traditional applications are the coating of diffusers or cover glasses for car headlights or polycarbonate glazing.

WHY THROW MONEY AWAY? If you are producing hoses, tubes, or profiles, ideally there would be zero scrap from your production operation. However, even the most efficient operation produces a percentage of scrap material. This is the money that you are losing. Why throw money away? Since the cost of plastic material, which has been constantly rising over the past years, is a large overhead cost to your business, Flexplas offers you very efficient and economical recycling systems to save up your money. With Flexplas recycling lines, you will be able to recycle your scrap plastic material and re-feed them back into your production for additional cost savings. Using an in-house Flexplas Recycling System you will be able to utilize a very high % of scrap back into your main production representing a very fast return on investment.

No matter if it is called a «Blisk» (bladed disk) or an «IBR» (integrally bladed rotor), no matter if it is single stage or multi stage, Starrag’s dedicated machine concept of the NB series provides the best solution for efficiently machining these parts. Blisks made from Titanium, Nickelbased superalloys and the Blisks made of blade steels for stationary gas turbines triggered the development of the NB series. For all the necessary manufacturing operations Starrag provides the benchmark Efficient roughing for Blisks machined from solid, adaptive machining for friction welded Blisks, high dynamic finishing of the airfoils in point contact. Shortest cycle times and zero scrap rate production are achievable on the Starrag NB series. The NB series is based on the very successful Starrag LX series.

No matter if it is called a «Blisk» (bladed disk) or an «IBR» (integrally bladed rotor), no matter if it is single stage or multi stage, Starrag’s dedicated machine concept of the NB series provides the best solution for efficiently machining these parts. Blisks made from Titanium, Nickelbased superalloys and the Blisks made of blade steels for stationary gas turbines triggered the development of the NB series. For all the necessary manufacturing operations Starrag provides the benchmark Efficient roughing for Blisks machined from solid, adaptive machining for friction welded Blisks, high dynamic finishing of the airfoils in point contact. Shortest cycle times and zero scrap rate production are achievable on the Starrag NB series. The NB series is based on the very successful Starrag LX series.

No matter if it is called a «Blisk» (bladed disk) or an «IBR» (integrally bladed rotor), no matter if it is single stage or multi stage, Starrag’s dedicated machine concept of the NB series provides the best solution for efficiently machining these parts. Blisks made from Titanium, Nickelbased superalloys and the Blisks made of blade steels for stationary gas turbines triggered the development of the NB series. For all the necessary manufacturing operations Starrag provides the benchmark Efficient roughing for Blisks machined from solid, adaptive machining for friction welded Blisks, high dynamic finishing of the airfoils in point contact. Shortest cycle times and zero scrap rate production are achievable on the Starrag NB series. The NB series is based on the very successful Starrag LX series.

AMOB Angle Rolls support the largest capacity profile bending machines in the world! With planetary moving bottom rolls, they can achieve faster, tighter bending with fewer passes, which results in reduced cycle times. The angle bending machinery range is available in both CNC and NC with AMOB’s specially developed auto learning software, which removes the need to do sacrificial test bends and therefore reduces scrap material and wasted production time. If bending the largest profiles is a requirement, then look no further than the MAH-AC Beam Roller from AMOB.