Sealing - Import export

Elastomer NBR. Brace ring and tension spring steel. Rotary shaft lip seals are readytoinstall seals for sealing rotating shafts. They are made from an elastomer outer sleeve and an internal bracing shim. The tension spring ensures increased pressure of the lip against the shaft and supports static sealing. Form A DIN 3760 (ISO 6194/1) version, smooth OD. Form AS DIN 3760 (ISO 6194/0) version, smooth OD with extra dust lip to protect from external dirt. The material NBR has a high wear resistance and is resistant to motor fuels, oil, hydraulic oil and lubricating grease. Operating limits Circumferential speed (m/s) ≤12 Pressure (MPa/bar) ≤0.05/0.5 (rotary shaft lip seals are generally meant for unpressurised operation).

Orings are universal sealing elements used to seal against liquid or gaseous median. They are suitable for static and minor dynamic applications. Orings can be used for radial and axial sealing. The sealing occurs during installation by the radial or axial compression of the crosssection. During operation, the median pressure increases the deformation of the Oring and so increases the sealing effectiveness. For best sealing effectiveness, the Oring should have the largest possible crosssection. During installation the correct groove size, compaction, elongation/compression should be ensured. By static use the compaction should be 15 30% of the crosssection. By dynamic use it should be 10 18% (hydraulic), 4 12% (pneumatic). With regard to the ID, when installed the Oring should be stretched max 6% compressed max 3%

Overview VT series VRLA (Valve Regulated Lead Acid) specially designed for cyclic and standby use, where a weight, available space and durability count.VRLA stands for valve-regulated lead-acid and is the designation for low-maintenance lead-acid rechargeable batteries. Features - Capacity range up to 250AH - Voltage 2V, 6V, 12V - Low self-discharge rate : less than 3% per month - High sealed efficiency : more than 98% - Wide operation temperature : -20°C to 45°C - Design life expectancy: minimum 10 years float charging condition at operating temperature of 30°C - Long design life and good discharge & charge performance - Plate: Positive and Negative grid plate use Pb-Ca alloy - Container: ABS resin for durability against impact and shock proof - Compliance IEC 61056, Approved ISO 9001, ISO 14001, UL, CE

Material, version: 1. Sealing cap red Polyamide 66 thermoplastic. 2. Filler sieve black Polypropylene thermoplastic. 3 Flange electro zinc-plated steel. 4. Fastening screws electro zinc-plated steel. 5 Flange seal cork. 6. Chain brass.

Race body steel. Wipers plastic/felt. Longitudinal sealing lips rubber. Rollers steel 1.3505. Note Roller carriage with lifetimelubrication roller bearings and wipers which lubricate the system when moving. By simply moving the centre cam roller, the roller carriage can be adjusted so that it is free of play or has the desired pretension in the rail. High travel speeds up to 7 m/s and extremely quiet (faster and quieter than systems that use recirculating balls). The wipers are fitted with an oilsoaked felt. This felt is in constant contact with the track to ensure perfect lubrication. The felts can be recharged using an oil pump through the lubrication points on the front. On request Roller carriages with 4 or 5 rollers.

SEAL KIT 991/00110 FOR JCB KIT DE SELLO 991/00110 PARA JCB KIT DE JOINTS 991/00110 POUR JCB 991/00110 ; 99100110

These sealing profiles are used to finish sharp edges and also to seal gaps. The profiles usually consist of PVC with a bulb of moss rubber, but profiles in EPDM and silicone are also possible.

Profiles for Industrial Applications. In the large group of industrial applications (refrigeration and air-conditioning technology, machines, production lines, switchgear housings, wind power, tracked crane systems, containers, etc.) we produce individual sealing systems tailored to our customers’ needs. Special designs made on short notice--even in small series--made of diverse plastic or elastomer qualities, or combinations of both materials or assemblies lets us be your technical problem solver. Our huge stock of standard profiles makes us a reliable partner for a wide-range of applications. Sealing Profiles Through application-specific production of rings, frames or fixed lengths, the product is precisely tailored to any purpose. The function of the profile is optimally executed even in the radiuses or corners. We manufacture ready-made profiles in various processes, from cold bonding, film bonding, injection molding to sealing.

Uprofiles are suitable as a sealing profile, edge finishing, clamping profile or as a bumper. High elasticity protects against tearing UV and ozone resistant Long lifespan

Tprofiles are specially made to seal gaps or crevices, of doors, hatches, windows or with sheet material. High elasticity protects against tearing EPDM and TPE UV and ozone resistant Widely used in ship and bodywork construction

Round cord is widely used as a sealing filler cord, or to make Orings. Protective effect Shock absorbing Can be manufactured into Orings by vulcanization or glue

Pprofiles are used as a bumper, sealing and finishing. Good fixation possibility due to strip on flat part of profile Different hardnesses and colors possible Perfect as a draft strip for windows and doors

Crown profile or crown band is a sealing rubber profiled in the shape of a crown. The profile can be used to obtain a water and airtight seal (draft tape) Crown band can be used both indoors and outdoors. Various applications in (antique) framework, factory glazing and wooden frames Strong adhesive layer

These sealing profiles have a double function. They are used to finish edges and also to seal gaps. The moss rubber flap is flexible and specially manufactured to close doors and hatches.

We supply various types of SEBS - EPDM / Silicon and EPDM rubber products of the highest quality. SEBS is a thermoplastic elastomer (TPE) with hardnesses between 20 and 85 shore A. They are also called technical rubbers, synthetic rubbers or elastoplastics, but then added with syrene. In our range you will find a wide range of rubber products, but we are also happy to be of service with customized SEBS rubber. Advantages of SEBS rubber SEBS rubber is comparable to EPDM, but has the advantage that small series can be made for a favorable price. Another big advantage is the resistance of this material. For example, SEBS rubber is UV and ozone resistant and resistant to extreme heat and cold. This ensures that this type of rubber is very widely applicable. SEBS has been described by Greenpeace as an acceptable alternative to PVC in toys. Polyethylene (PE) and Polypropylene (PP) are the most commonly used building blocks for SEBS.

Designed for temporary packaging of food products in grocery stores and catering establishments. The film does not allow odors to pass through and protects food from drying out.

Packaging Products Sterilization Reels Sterilization Pouches Sterilization Self Sealing Pouches Tvyek Reels

Individually numbered hexagonal Keytracker 1.5mm secure seal for attaching equipment or keys to the Keytracker system

Keytracker anti-tamper seals ensure no unauthorised removal of an item or a key from a bunch. Seals are available in white, blue, yellow, orange, green, and red. The anti-tamper seal is writable with a biro or we can supply printed stickers with either your logo or message on it.

Precut lids Plastic, aluminium, paper, laminate Precut for all kind of shapes Different embossed profiles according to the product Made for high speed production New shapes can be developed quickly and at low cost Certificates for food, pharma, cosmetics, etc. Printing is possible Many sizes and types available from stock Plastic film on reel Any width or length available on request Sealing or peel-off Anti-fog Permits metal detection Printing is possible

DELOMONOPOX epoxies are one part, heat cured epoxy resin adhesives for bonding, casting and sealing of joints. The epoxy resin adhesives are high strength materials that can be used as alternatives to riveting, welding and brazing in high stress applications. Epoxies exhibit excellent adhesion to metals, ferrites and ceramics. Special advantages of epoxies include their resistance to temperature, chemicals and low water absorption. They will also protect against corrosion. The epoxy resin is supplied ready to use with no mixing required. Curing occurs in 15-75 minutes @ 130-180 degrees C. Versions are available with good flow properties or with high run-off resistance. ** Click for more **

DELO-DUOPOX are two part epoxy resin adhesives for bonding, casting and sealing of joints. Providing excellent adhesion to many materials, these two part epoxies are ideal in stressed or extreme conditions, including automotive and engineering applications. Two part epoxies are cold-cured, high-strength materials, which can be used where curing with heat is not an option. They cure when the two components are mixed together in the correct ratio. Product dependant, most versions are available in DELO-AUTOMIX cartridges, which present the two epoxy components (resin and hardener) in the correct ratio via a dispensing / mixing cannula. A wide range of curing properties are available, with rapid cure versions that are firm to touch in less than 10 minutes, to versions that are firm to touch in 8 hours. They offer high chemical resistance and are available in a wide range of viscosities. ** Click for more **