Switches - Import export

Gigabit Ethernet PoE Switch can transmit huge data into backbone of high power servers in security topology. For the low delay and high integrity protection, the PoE switch supports high performance of Store and Forward With the intelligent address recognition algorithm. The Switch recognize architecture eliminates unnecessary traffic and solve the critical network congestion. Different Mac Address enables the filtering of complete transmission speed. • 10/100/1000Mbps TP 8 Ports (802.3at PoE) + 100/1000/2.5Gbps SFP 2 Slots • Web based Management, Telnet, SSH, SNMP, RMON, Syslog • Auto MDI/MDI-X for UTP • Auto Scan Manager Program(Scan, IP Setting) • S-Ring(Recovery time <10ms), Dual-Ring, ERPS • PMC support(IGMP/MLD) • Max. PoE Output Power budget: 30W/port, 240W(total) • Switch Fabric 26Gbps • DIN-Rail, Panel mounting • Power Input: DC24~56V • Dimension: W61 x D110 x H157(mm), Aluminum Case, IP30 • Operating Temperature - Operation: -40℃~70℃ - POE full load : 40°C~50°C

Housing thermoplastic. Version: Operating principle: Magnetic. Rating: IP67. Note: If the actuator is within the switching range (safety door closed), the safety contacts and, if applicable, the signal contacts of the safety switch are activated. The contact is thus closed via a magnet (magnetic field). Form A: Actuator on one level to the safety switch. Form B: Actuator offset by 90° to the safety switch.

Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.

Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto recovery. Protected against short-circuit, overload and surges. Power on LED indicator. For DIN top hat rail mounting. Technical data: Rating: IP00 Protection class: I Standard: UL508, TUV EN60950-1, CE Connection: screw terminals with contact protection Fastening: installation on DIN rail TS-35/7.5 or 15

Housing, die-cast zinc. Housing cover, plastic, self-extinguishing. Hinge bolts, die-cast zinc/steel C45. Contacts, silver-nickel alloy 10. Note: The security hinge switches are used for monitoring the position of swing-hinged safety doors, protective hatches and hoods. The protective device is monitored directly in the hinge. By the universally pre-set versions, the switching angle is freely adjustable over the entire working range. A mounting aid ensures the quick alignment to doors and posts. The additional hinges have the same appearance and dimensions as the security hinge switches. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.

The cam-type limit switch is a device used to control the movement of industrial and construction machinery. Information is transmitted via the shaft actuating micro-switches. Standard range BFCN: Gear ratio from 7.5 to 550 Number of cams from 2 to 5 Maximum rotation speed: 500 rpm IP55 Range BFRS: Gear ratio from 10 to 200 Number of cams 2 or 4 Maximum rotational speed: 500 rpm IP55 Options for both ranges: potentiometer, gear wheels, couplings, mounting flange, various cams The micro-switches are either deflection type or with positive opening. The choice between different types of cams allows to modify the reaction curve of the limit switches. On request, specific versions: Up to 12 cams Protection IP66 / 67 /69K Integrated potentiometer or encoder ATEX zone 2 and 21

A switch disconnector ensures the interruption of current (under load) and the isolation of the load from the electrical supply. It provides optimal protection to users during machine maintenance as it can be locked with a padlock, preventing accidental startup during maintenance. Standard range: For 3P or 3P+N supply Ith 32 to 160A Available versions: In IP65 enclosure In enclosure with integrated fuse holder In cabinet bottom version (DIN rail mounting) with shaft (optional front plate) In panel mounting version (optional front plate)