Air jet - Import export

Aerator Nozzles represent the most economic solution to ensure material flow from silos, bins or hoppers.

air regulation, needle valve, adjustable jet

Method for determining the grain size; air jet sieve, vibrating sieve, but also used in a production system for separating the coarse component of a powder so as to obtain the desired grain size distribution. Using acceleration to separate particles of different weights and therefore mostly different sizes.

Rotoguide: Micro-jet technology with air bearings from ROTOGUIDE stands for ultimate accuracy, load-bearing capacity and robustness. Shafts and bearing parts are machined to ultra-high precision for a positioning accuracy within µm range. ROTOGUIDE units are especially suitable for highly accurate linear and rotational motion under ultra-high vacuum and for all processes with ultimate demands in terms of cleanliness and accuracy

The micro-jets set adds a delicate touch to the hydro-massage’s power. This optional can be installed on any system, depending on the bathtub model. Limit: The 6 dorsal micro-jets set can’t be installed on Alegria bathtubs of 150 and Ludica of 150.

The equipment offers hydromassage and aero-massage functions, underwater halogen spot and automatic disinfection, through digital control. Starting and stopping the electric pump and the blower, activating/deactivating the underwater spotlight, the heater (optional), etc. they are done by operating the keys of the digital control. The adjustment of the air flow taken by the water jets is done by the solenoid valve, by digital control. Structure: 6 adjustable and adjustable water-air hydromassage jets (depending on the size and geometry of the tub) Electric pump, 700W – Italian production Sorb 3F with anti-cavitation safety valve 12 air jets with lateral diffusion, placed on the bottom bathtubs; Blower (blower) 700W – Italian production Minimum water level sensor in the tub (electric pump and underwater halogen protection) Multi-LED chromotherapy spot

The equipment offers hydromassage and aero-massage functions, as well as an underwater halogen spotlight, through digital control. Starting and stopping the electric pump and blower, activating / deactivating the underwater spot, etc. they are done by operating the keys of the digital control. Adjusting the air flow taken by the water jets is done by rotating the keyboard body. Structure: 6 adjustable and adjustable water-air hydromassage jets (depending on the size and geometry of the tub) Electric pump, 700W - Italian production Sorb 3F with anti-cavitation safety valve 12 air jets with lateral diffusion, placed on the bottom of the tub; Blower (blower) 700W - Italian production Minimum water level sensor in the bathtub (electric pump and underwater halogen protection)

The equipment offers the function of hydromassage and aero-massage, through pneumatic control. Starting and stopping the electric pump and the blower are done by pressing the pneumatic buttons. Adjusting the air flow taken by the water jets is done by turning the regulator or regulators (two for larger tubs). Structure: 6 adjustable and adjustable water-air hydromassage jets (depending on the size and geometry of the tub); Electric pump, 700W - Italian production Sorb 3F with anti-cavitation safety valve 12 air jets with lateral diffusion, placed on the bottom of the tub; Blower (blower) 700W - Italian production Automatic column with siphon; Metal support with adjustable legs and clamps for fixing to the wall, anti-corrosive protection

Hydrotherapy is the naturist medicine branch based on the external use of water in therapeutic and prophilactic purpose. The hydro-massage acts as a manual massage, relaxing the muscles and distending the blood vessels. It is attained by lateral water-air jets. The air-massage is produced by the air bubbles, which stimulate the skin receptors, reduces the muscles pressure and relaxes; another benefic effect is the skin regeneration, refreshing the entire organism. The natural massage produced by water and air movement is realised today with the help of technology. Belform bathtubs can be equiped at request, depending on the model choosen, with diversified AquaJet Italia hydro-massage versions, equiped with Italian or Spanish production pumps.

Hidrotherapy Hydrotherapy is the branch of the naturist medicine that uses water for therapeutic or prophylactic purposes. The hydro-massage achieved through lateral water-air jets relaxes muscles and dilates blood vessels. Aero-massage The aero-massage achieved through air bubbles stimulates skin receptors, reduces muscle tension, regenerates the skin and refreshes the entire body. The natural massage made by the motion of the water and of the air is created today by technological means. Several minutes a day, at a temperature close to the temperature of the human body are enough to provide calmness and relaxation.

The equipment offers the hydromassage function, through pneumatic control. Starting and stopping the electric pump is done by pressing the pneumatic button. Adjusting the air flow taken by the water jets is done by turning the regulator or regulators (two for larger tubs). Structure: 6 - 8 adjustable and adjustable water-air hydromassage jets (depending on the size and geometry of the bathtub) 700W electric pump – production in Italy or Spain Sorb Automatic column with siphon Metal support with adjustable legs and wall fixing brackets , anti-corrosive protection Manual control

Blower turbo-massage (optional for the ELITE system) Once assembled, this optional introduces a supplementary air debit into the air base lines, supplied by a turbo-blower 1Hp. Activating the blower leads to air enrichment of the air-water jets and implicitly, to an energic, sportive hydro-massage. The optional is a standard endowment in the superior systems of ELITE system. Supplementary multi-LED spot (optional fot ELITE and ELITE TURBO system) The supplementary spot is the same type as the one previously described. The second spot has a syncronized functioning with the first one, increasing the intensity of the light show. The optional has a standard endowment in the superior systems of ELITE TURBO system. Optic fibre STARS20 illumination (optional for ELITE, ELITE TURBO and ELITE TURBO PLUS systems) The colored light provided by a multi-LED EFX22 module, installed in a dispersion body in the optic fibre, is transmitted through optic

The efficiency of a Steam turbine is mainly determined by the pressure of the steam at its outlet. The Turbine Surface Condenser is therefore maintained under vacuum. To enable this, the Steam Jet Ejector Vacuum System must be capable of removing all non condensable and associated water vapour from the Surface Condenser to produce the minimum steam condensing pressure consistent with physical dimensions and heat transfer and to provide for deaeration of the condensate. The sources of non condensables include air leakage through all system components operating below atmospheric pressure, gases released from feedwater drains and vents admitted to the condenser, gases released for makeup admitted to the condenser, condensate surge tank when utilized in a closed cycle and disassociation of feedwater into oxygen, hydrogen and non condensables.

Device for automatically blowing the adhering water off after passing through the pretreatment plant. The rotary blow-off zone is a device for blowing the adhesive water off workpieces that have been washed for the purposes of painting. It consists of a closed stainless steel sheet metal housing with forced ventilation and is employed immediately after the washing installation. In order to achieve more effective drying in the case of fissured surfaces, the blower nozzles are arranged on a rotary axis. The adhering water is blown off by the parts by air blown at high speed through the rotary blower nozzles. The effect of this is that no water droplets remain on the workpiece that could lead to slight marks in the paint film. Due to the varying blowing direction, the water is also blown out of problem zones and scooped parts in most cases. In order to be able to optimise the direction of the blower nozzle air jets, the nozzles have adjustable nozzle heads. The water that is blown off runs back into the pretreatment plant. The blowing air is extracted from the blowing tunnel via a return air duct with adjustable suction apertures.

Capacity between 5000 and 20000 litres (net capacity) 2-, 3- or 4-axle chassis. Any commercial chassis brand. For JET FUEL and water. Other fuel types and additives on request. Air-side only. Civil Various meter options (Alfons Haar, Liquid Controls, SATAM, ISOIL, …) Only cleaner or combination cleaner/flusher with hydrant intake line. Optional low-point flushing hose reel, water jetting hose and air hose. Optional vacuum tank with vacuum hose. Optional hydraulic crane for lifting hydrant pit valves and covers. Optional fuel pump for recirculation and unloading of the fuel tank.

An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.

An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.

An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.

An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.

An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.

System allowing to direct a compressed air jet to the tool. Subject to the machine configuration / chosen options. Online sales on Meca-line site here

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our product portfolio for cleaning with ionized air you will discover systems and products for many industrial sectors. Static Combi Cleaner SCC is a highly effective ionizing blowing station for contact-free removal of undesirable dust and dirt deposits on three-dimensional or structured surfaces. Statically adhesive dust is discharged and blown off by pulsating air jets. Effective removal of electrostatic charges from the cleaned surface prevents fast re-contamination of the products. The Static Combi Cleaner is ideal for drying workpieces and tools.

Newly designed slotted jets arranged throughout the entire operating width guarantee constant flow conditions in the drying compartment. Depending on the coating material, the air is heated via hot water, thermal oil or steam in special heat exchangers. Particularly intensive drying is achieved through the high air speed in the jet channel.

Facing new manufacturing challenges? Want to be quicker and more precise than your competitors? Then you need ConSus. The ConSus system is an Abrasive Mixing Unit (AMU) in which abrasive is added continuously to the pressurized water flow with the worldwide patented lock method. High capacity and low pressure have been unachievable in water jet cutting until now. That’s exactly what the Water Abrasive Suspension (WAS) cutting method from ANT delivers. Tests prove: The ANT suspension jet cuts two to three times faster than conventional water jet cutting methods and at less than half the pressure. The reason for this is the composition of the water jet - a suspension made of water and an abrasive, which is pressurised without air before being squeezed out of the nozzle. The omission of air allows the jet to cut much more efficiently. ConSus combines all of these benefits in a single unit, which can be integrated into any existing water jet cutting system.

Fine Mill The solution for fine grinding Ebbecke Verfahrenstechnik AG is your specialist for demanding tasks in the area of ??contract grinding. The fine grinding plants used enable the dissolution of agglomerates as well as the breaking up of solid grain structures including even the very finest grinding. All our grinding plants for bulk material processing are made of stainless steel and designed with dosing devices, discharge with one-way filters, separators and bunkers as closed plants. Accordingly, they comply with all the strict specifications and hygiene standards of the of food, pharmaceuticals and cosmetics industries. Technical data Target fineness: 1.0-5,000 µm Plant types: Classifier mills, air jet grinding plants, spiral jet grinding plants, pin mills, cross beater mills, hammer mills, Fitzmill, screen mills, disc mills, graters, crushers, cryogenic grinding, nitrogen overlaid plants Product-contacting parts: Stainless steel Delivery in: Bags, bales, Big Bags, octa

Major engineering companies who design and manufacture aerospace engines rely on the strength and durability of tubing products made at the Superior Tube mill. This is due to our reputation for producing high quality, high strength, yet lightweight tubing. You’ll find our tubes at work within a variety of systems in aircraft including fuel delivery, fire suppression, drain lines and bleed air systems. Bleed air is high temperature, high pressure air taken from the jet engine and fed into various areas of the plane to be used for things like de-icing and cabin pressurization. We use high performance materials such as Alloy 321 stainless steel and Inconel 625 and 718 for applications that deal with extreme temperatures. Precision tubing for aerospace engines can be ordered in sizes from 0.250” outside diameter right up to 1.5”. Please note that we have a minimum order value of £10,000.

SCHÜTZE WS 5/1 fluid sprayer spraying liquids under pressure in a hollow cone jet without atomizing air. drill-hole in nozzle plate: 1,5 mm ø (other drill-holes depends on liquid) Simple design. Also to be connected to any water supply line. weight: 300g

Nash has been designing, manufacturing and troubleshooting steam jet air ejector systems since 1986. Steam ejectors provide vacuum in many process industries and utility companies. Combining low capital cost, simple operation, high reliability and the ability to handle large volumes at very high vacuum levels, they can be optimized to contribute to process enhancement and operational efficiency.

The AQUA BLAST wet blasting cabinet is a combination system for degreasing and simultaneous gentle beams of various workpieces. The water - jet mixture is housed in the cabin swamp. This abrasive mixture is sucked in via a novel centrifugal pump of wear-resistant polyurethane. At the jet of compressed air is additionally adjustable added so as to achieve an optimum surface finish. After loading of the workpiece, the blasting medium mixture flows back into the cabin sump and is thus an abrasive circuit ensured. Battered fine abrasive is suspended from the cab sump and fed to a band filter on the cabin back.