Alarms- fire - Import export

Intrinsically safe light and sound sirens are used in fire alarm systems, in evacuation control systems, extinguishing systems etc. in explosive areas Power supply voltage - 12 V 5 variants of labels (or custom).

Light and sound sirens are used in fire alarm systems, in evacuation control systems, extinguishing systems etc. 13 variants of labels (or custom) and modifications for the power supply voltage of 12 or 24V.

PS2415 is used to power the components of fire alarm system, fire extinguishing equipment and alert equipment with an operating voltage of 24 V.

Gas leakage detector for oil field oil stock chemical factory combustible gas (or toix gas) detector with audio and visual alarm on spot. Combustible gas detector explosion proof mark is Ex d IIC T6 Gb and environment proof IP65. https://vedardalarm.com/industry-gas-leakage-detector-explosion-proof-security-equipment-p-212 Carbon monoxide is a flammable gas and a toxic gas as well. According to the requirements of the design code for detecting flammable gases and toxic gases in petrochemical industry, only toxic gas detectors should be set up. Therefore, when choosing a detector where carbon monoxide is likely to leak, you should choose a carbon monoxide poisonous gas detector. Each combustible material in the air explosion range has a certain value, lower or higher than the concentration of this range will not ignite. https://www.vedard.com/blog https://www.vedard.com/forum

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

This tool is used by home owners, commercial maintenance staff, and fire safety inspectors. With the Smoke Detector Pole you can make testing your smoke detectors safe and easy. No more ladders, brooms, sticks, or inconvenience. Created by a housing inspector, the patent pending design makes it possible for anyone to test smoke detectors quickly and with ease. Max. Pole length is 5m Easy to use,all the parts in one case Smoke testing pole for fire alarm system https://vedardalarm.com/smoke-detector-testing-instrument-fire-system-inspection-p-246 Fire security system maintenance tools. https://www.vedard.com/forum/fire-extinguish-fighting-system-control-fire-t346.html

Run with 24Vdc (+/-10%) supply Relay contact output Long maintenance-free service life

Fire Hose Reel Cabinets are manufactured as surfaced or recessed wall mounted, glass lids, or sheet metal lid with fire extinguisher compartment. House reel mounted inside the cabinet which door opens 180º. The reel can easily be removed from the cabinet to facilitate the installation. All cabinets are painted untouched by human hands as requested RAL color at our open painting ovens.

Ensure that you’re protected with the highest quality fire detection and extinguishing facilities with the help of the London City Fire & Electrical Group. Our team is experienced in every facet of fire alarm system design, installation, and service. All fire detection and alarm systems must be regularly serviced in order to highlight any potential faults and to provide the preventative maintenance that keeps them reliable for the foreseeable future. Let us help you ensure you’re giving your fire safety systems the care they need. In order to make our services as accessible as possible, we offer a free quotation, as well as a price match guarantee to provide you with more value than anyone else in the industry.

The Fibreflam ISO6 curtain is a flexible partitioning curtain without irrigation. With a fire resistance degree of EI60, it also conforms to the DAS NF S61-937-1 and -4 standard. Thanks to its control panel and its motor operating in 400V, the closure of the curtain is obtained by gravity in case of fire alarm. Only its reopening is motorised. The standard dimensions of this fire curtain are up to 4.36 m wide and 4.21 m high. In spaces with strong architectural constraints, this curtain can easily be hidden behind cladding. We can help you with this project, so don't hesitate to submit your requirements via this contact form or by clicking on our website

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

Addressable fire alarm control panel with 2 loopsIntended to protect premises of any size. This is a new look at fire safety: a modern software and hardware platform, high technologies, an affordable price and impressive capabilities that are not characteristic of any domestic analogue.

Remote LED indicatorDue to its compact dimensions (11x45 mm), the VPOS can be used as remote indicator for Intrusion Alarm System setting/unsetting confirmation Also, VPOS can be used as remote indicator for fire alarm detectors, e.g., for detectors installed behind the ceiling, false floor etc. Can be connected to all fire detectors with the appropriate contacts

DETECTO MNL100 is an addressable manual call point designed to work as part of the Tiras PRIME A system. It is installed in the protected premises for generation a fire alarm signal in manual mode.