Angular transmissions - Import export

FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.

Highly flexible coupling with progressive torsional stiffness MULTI CROSS FORTE MCF * Very high torsional flexibility with a progressive torsional characteristic line * High compensation capability of axial, radial and angular misalignment * Backlash-free torque transmission even for reverse rotation * High torsional vibration and shock load absorbing capability * Good removal of heat which may be generated by the damping effect of the coupling * Easy alignment of the coupling * Positive fit between transmission element and hub fl ange to prevent relative movement * Cost-saving spare parts inventory by use of the same element size within one series type

The MULTI CROSS FORTE is a highly flexible coupling with progressive torsional stiffness. The special characteristic of all MULTI CROSS FORTE couplings is the use of transmission elements, which are alike within the same type series, but their number vary according to the size of the coupling. The most salient characteristics and advantages of the highly flexible MULTI CROSS FORTE coupling: Very high torsional flexibility with a progressive torsional characteristic line High compensation capability of axial, radial and angular misalignment Backlash-free torque transmission even for reverse rotation High torsional vibration and shock load absorbing capability Good removal of heat which may be generated by the damping effect of the coupling Easy alignment of the coupling Positive fit between transmission element and hub flange to prevent relative movement Cost-saving spare parts inventory by use of the same element size within one series type We are glad to see that you are...

Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack

PTFE bellows are extremely resistant to chemicals and thermal stresses. Used as compensation elements between structural components, bellows offset changes in length resulting from thermal expansion, permit axial, lateral and angular movement, and prevent a transmission of vibrations. Thanks to their thin walls, the bellows are highly elastic. Type HV01 V-shaped bellows, engraved (non-cutting). Highly flexible bellows providing maximum expansion with respect to their installation length. Designed for low pressures. Type HU02 U-shaped bellows (cutting manufacture). Highly rigid. Deployable up to 6 bar depending on temperature and dimensions. Smaller compression and expansion than type HV01.