Extruded aluminium - Import export

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal Features: modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. The cover is lifted by the hinge, significantly reducing the effort required. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the...

Load capacity: Class A (15 kN test force) EN 124. Material: Frame made of extruded aluminium sections. Cover made of extruded aluminium sections with composite aluminium honeycomb plate (white coated). Stainless steel screws 2 EPDM seals. Features: Modern lightweight access cover. High weight reduction when compared with concrete filled access covers. Opening the light cover is just child's play. Since the concrete filling of the cover is omitted, the installation is much quicker and simpler. An unrestricted height of 14 mm is available for laying slabs, tiles or parquet flooring etc. Odour and waterproof access cover in high-quality finish. Pleasant visible edges. Unobtrusive corner joints ease the joining of tiles or slabs etc. The Lift-Off opening system: Each HAGODECK Type CLA-SL slim composite light Alu is delivered with a set of lift-out keys and precise installation instructions. The HAGO advantage: Jammed covers are lifted up by simply turning the golden lift-out...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal. High-quality gas-lift struts. Features: Modern lightweight-construction access cover with maximum ease of opening. Major weight-savings compared to concrete-filled access covers. Extremely easy to open thanks to gas-lift struts. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM sealing Features: Modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. Opening the light cover couldn’t be easier. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the Lift-Off System: As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2...

Load capacity: 125 kN test load EN 124. Material: Frame and cover sections in extruded aluminium. Features: BVA-RA alu largely sealed (design similar to BVA): New modular system with huge advantages. The frames are joined lengthways to special connecting elements. For larger covers (from a length of approximately 3 m), the HAGO multi-part cover is delivered disassembled, ready for assembly on site. Patented cross-beams: The cross-beam system is registered as Patent no. 396796. The cross-beams can be easily removed without tools, to give clear access to the entire duct. Cross-beams are easy to insert and fix in place. They can be taken out again very easily if the entire duct needs to be freely accessible, e.g. when retrofitting pipes or when undertaking repair work in the duct. The Lift-Off opening system: Every HAGODECK Type BVA-RA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning...

LOAD CAPACITY: 125 kN test load EN 124. MATERIAL: Frame and cover sections in extruded aluminium. Stainless steel screws. FEATURES: Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement. THE LIFT-OFF OPENING SYSTEM: Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. APPLICATIONS: Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion...

Load capacity: 15 kN test load EN 124. Material: Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminium chequerplate. Aluminium reinforcement to the underside. Stainless steel screws. Features: Sealed cover. EPDM seal. Completely rust-proof. Light weight. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where corrosion-resistance and/or low weight are of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 3.5 cm Total height including reinforcement of bottom ≈ 7 cm Special sizes possible *S = available from stock *O = to order

Our unique laminate clamps CLICK and SECURITAS are superior-quality extruded wrought aluminium alloy clamps with a built-in contact seal. The elastic seal made of UV-resistant elastomers is responsible for optimised and suitably powerful clamping. Our clamps can be mounted quickly and easily, function excellently and offer other benefits. Their versatility allows them to be adapted to the specific requirements of each customer, while offering top quality and short delivery times.

•IP65 Passive cooling; extruded aluminium-alloy housing •Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle •5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries •LED indicators showing corresponding charge status and errors •Protection against short circuit, reveres polarity, over temperature or overload •Battery recovery function for attempting to revive a deeply recharged or "dead" battery with recurring series of voltage/current pulses

• IP65 Passive cooling; extruded aluminium-alloy housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload • Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses

• IP65 Passive cooling; extruded aluminium-alloy housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload • Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses

• IP65 Passive cooling; extruded aluminium-alloy housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload • Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses