Lift motor - Import export

"Slip ring motors are often used in applications where the maximum transient torque must be greater than a conventional cage induction motor, such as quarries. SLIP RING MOTORS (OUR CODE: MB) - Three-phase wound rotor motors - Standard cast iron housing - Stored in IP55 protection and on request in IP23 - Stored in 230/400V from 22kW to 315kW , 400/690V to 560kW - Operating in 50/60hz - Other special voltages or insulation class H on request - Form B3-B5-V1- B35-V15 - Stored in S1 service or S3 service (6 starts per hour) - On request, we can supply motors for lifting applications with 1 or 2 cylindrical or conical axes - Standard motors equipped with PTC sensors - Equipped with roller bearings for belt drive - Electrolytic starters are stocked to start these motors"

The PROJECTOR LIFT MVS 500 is equipped with heavy-duty but silent motor which assures a fast and stable up-down movement of the projector. Furthermore, the motor is provided with an RF remote control and offers the possibility to set three motor limit stops: an upper stop limit, an intermediate one and a down one. The intermediate stop can be set at the desired height for projection mode, whereas the down one can be adjusted up to 500 cm. stroke to be used as service mode position. Also a safety device is built-in in order to offer maximum security in case of any failure of the mechanism. The projector anchoring frame movement is controlled by two strong steel cables that are certified for a maximum load of 350 kg. each.

The PROJECTOR LIFT MVS 40-25 is studied in order to support large and heavy Professional and Home Cinema video projectors up to 25 Kg. of weight. The lift has been developed to be installed inside a very narrow false ceilings of only 14 cm. granting the best aesthetic and practical solution in hiding the projector, lift and cables. The MVS 40-25 is supplied with a powered and extremely silent motor that allows a descent from a minimum of 14 cm to a maximum of 54 cm. Moreover it is supplied with extendable side brackets in order to allow an easy fixing of the panel of your false ceiling by adjustable threaded bars. The lift MVS 40-25 is equipped with two safety screws which prevents the lift to extent further to the preset end stop. *ceiling cover plate not included

The heavy PROJECTOR LIFT SERIES MVS 300 is a very strong and reliable new range of lifts specifically developed for large venue applications where large projectors need to be moved. These lifts are equipped with heavy-duty but silent motor which assures a fast and stable up-down movement of the projector. Also a SAFETY DEVICE is built-in in order to offer maximum security in case of any failure of the mechanism. The projector anchoring frame movement is controlled by two strong steel cables that are certified for a maximum load of 350 kg. each. A unique and professional cable management system is supplied integrated in the product. This allows to connect safely and tidily the projector with the power and signal cables.

The PROJECTOR LIFT MVS 30-15 is a versatile very compact projector lift that enables the installation of projectors in environments where particular aesthetical solutions are required. The product has been developed to be installed inside a false ceiling where very few space is available. You need inside the false ceiling only 13 cm. of minimum height to install lift and projector. The MVS 30-15 is supplied with an extremely silent motor that allows a descent of maximum 30 cm and can carry up to 15kg. The lift is supplied with two safety screws. * ceiling cover plate is NOT included

The PROJECTOR LIFT MVS 200-15 is a versatile and innovative product that enables the installation of the projectors in environments where particular aesthetical solutions are needed. MVS-200-15 is supplied with an extremely silent motor that allows a descent from a minimum of 23 cm.to a maximum of 190 cm. and can carry up to 15kg. Moreover, the MVS 200-15 is supplied with a particular system that allows an easy fixing of a panel of your false ceiling by the threaded bars whose height is adjustable. One more interesting element of this lift has a cables gathering system with a raceway where to put the cables of the projector, so they will be hidden and tidy gathered together when the projector lift is going up. The lift is supplied with two safety screws.

The PROJECTOR LIFT MVS 100-25 is studied in order to support large and heavy video projectors up to 25 Kg. of weight. The MVS 100-25 is supplied with an extremely silent motor that allows a descent from a minimum of 14 cm. to a maximum of 97 cm. Moreover it is supplied with extendable side brackets in order to allow an easy fixing of the panel of your false ceiling by adjustable threaded bars. The panel can be mounted under the projector, even if the projector is larger as the lift itself. The lift MVS 100-25 is equipped with two safety screws that prevent the lift to extent further to the preset end stop. *ceiling cover plate not included

The PROJECTOR LIFT MVS 100-15 is a versatile and innovative product that enables the installation of projectors in environments where particular aesthetical solutions are needed. The product has been developed to be installed inside false ceilings in order to hide projector, lift and cables, thus granting the best aesthetic and practical solution. MVS 100-15 is supplied with an extremely silent motor that allows a descent from a minimum of 16 cm. to a maximum of 90 cm, and can carry up to 15kg. An interesting element of this lift is a cables gathering system with a raceway where to put the cables of the projector, so they will be hidden and tidy gathered together when the projector lift is going up. The lift is supplied with two safety screws. * ceiling cover plate not included