Brass fittings - Import export

Raccords en laiton fondus et tournés sur mesure. 2 ½” F x 60 M SI Ref. 02001ADL 2 ½” F x 2 ½” M Ref. 02004ADL 2” M x 45 F Ref. 02006ADL 2” F x 45 F Ref. 02005ADL 1 ½” M x 45 F Ref. 02009ADL 1 ½” F x 45 F Ref. 02008ADL 60 M SI x 60 M SI Ref. 02012ADL 2 ½” M x 2 ½” M Ref. 02001ADL 2 ½” M x 60M SI Ref. 02002ADL 2” M x 45 M Ref. 02007ADL 1 ½” M x 45 M Ref. 02011ADL 45 M x 45 M Ref. 02010ADL

The TOPAZ float valve stands for a high flow rate (FastFill) and enables filling capacities of up to 200 l/min due to its diaphragm operating principle. It can be mounted above or below the water surface (not the COMPACT variant). It should be emphasised that the valve closes slowly in order to avoid a flashback to the water line and pumps. The quick-fill valve fills with full flow up to the highest level. All JOBE valves are made of high-quality ABS or nylon plastics and are always complete with float. The ROJO and TOPAZ series are also available in a COMPACT version (C), which is used when space for installation is limited, as the weighted narrow float has a very compact design.

Made of nickel-plated brass with union nut

brass gas orifice hex incircle diameter 0.69 +/- 0.03 inch inner through hole diameter 0.328 +/- 0.010 inch length 0.531 +/- 0.010 inch external thread 5/8-28UN manufactured by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Ningbo FRIMA Machinery is an owneroperated company located Ningbo city in the east of China. We are a manufacturer which is specialized in producing nonstandard mechanical parts (custom parts) by CNC MACHINING, (https//www.frimaparts.com/cncmachiningparts/)STAMPING, INVESTMENT CASTING and ALUMINUM DIE CASTING process, Custom Stainless Steel Fitting, Brass fittings, Carbon steel fittings ,etc.

hose brass fitting, brass adaptor

Threaded brass fittings (material no. CW617N, composition CuZn40Pb2) are well-suited for the use in a wide range of applications such as heating, rain water or water /glycole mixtures (or similar water with frost protection additives). Threaded brass fittings are durable and easy to install and have a high Brinell hardness for increased corrosion protection. Our programme of threaded brass fittings also includes brass extensions. The wide range of different threaded brass fitting dimensions from ¼“ up to 2 1/2“ as well as several different chromed versions off installers the option of finding the right fitting for the application in question. Even though brass fittings are allowed for drinking water installations in many countries, we recommend the use of our lead-free series for this application.

Our fittings has been designed by our own European Engineers team. We designed an innovative a profile which avoids the risk of damaging the O-rings when the pipe is pushed on to the fitting. Our fittings high quality is based on: – Patented design brass fitting, with three EPDM O-rings and inox sleeves. – Triple safety with three O-rings in the designed fitting. – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3. – Compatible with multilayer pipes. – Compatible with several jaw profiles U, H, TH, RFz – Lead free brass available on request.

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve

The press fittings present herein are used for domestic water supply adduction systems and for heating systems. They are applied to the tube along with the steel flanges.

We can produce wide range of brass fittings. We are able to offer you the best quality and the best price on the European market. If you are interested in cooperation with our plant please fill free to contact us.

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

Body, cover and lever: cast iron Inner mechanism: brass Braid: PTFE Suction: 3/4'' stainless steel pipe with 2” bung Seal: flange O-ring made of Viton®. Optional PTFE seal (FAT_-PTFE) Discharge pipe: stainless steel elbow fitting, 2 m NBR hose (conductor) fluid temperature <80°C Fitting: brass half-shells Manual delivery gun (version FAT ), automatic delivery gun (version FAT_A)

These three wall lights have extremely soft lines. The model 540 adorned the small ladies lounge on the cruise liner “Normandie”. It can be fitted with a brass bowl for indirect light. Different finishes and diameters available Works with any type of bulb

These three wall lights have extremely soft lines. The model 540 adorned the small ladies lounge on the cruise liner “Normandie”. It can be fitted with a brass bowl for indirect light. Different finishes available Works with any type of bulb

These are the conductor used in filtration system.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

Entrée STORZ 25MM - 3 POSITIONS

The bar magnets are workable on both sides. On the holding surface an individual shape is possible and the adhesive force is adjustable. Bar magnets with an area for a free machining on the adhesive surface moreover offer a better wear protection compared with other bar magnets. Alternative to the standard we also offer individual solutions: » Stainless steel housing + pole shoes » Greater holding power » Greater temperature until 280 °C

To differentiate the otherwise identical SmCo series the NdFeB bar magnets are coloured blue on the holding surface. Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater holding power » Greater temperature until 280 °C » Stainless steel pole shoes

Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater temperature until 280 °C » Stainless steel pole shoes

Our hand brushes range from 1 row brushes -for tight cleaning spaces - through to 6 row heavy duty brushes. The length and diameter of the wire filaments is determined by its usage and the degree of agitation required to either remove debris and grime or create a fine finish. All brushes can be fitted with a Brass scraper for additional detritus removal.

Compression for gas engine  300 PSI  36cm  2 x brass fittings  14mm  18mm

Brass made fittings  0-140 PSI  The fuel gauge is perfect for most gas engine fuel injection system. Not suitable for high pressure diesel injection pump or direct injection engines

Brass made fittings  0-145 PSI  30cm hose  1 x Rubber hose (1/4’’ x 2.5’’ L)  1 x Rubber hose (3/8’’ x 3’’ L)  1 x Short flex hose  1 x Medium flex hose  1 x Long flex hose  1 x Hose clamp

SIMPLE BUT POWERFUL: XtremepowerUS 1/3 HP 4 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use HEAVY DUTY CASING: Die-cast Aluminum Alloy Casing enables the vacuum pump oe light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling EASY OIL CHANGE: The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oH PACKAGE INCLUDED: Multicolored set of three 36" hoses, Manifold Gauge, Oil Bottle, Accessories, Leak Detector and Storage Bag to keep equipment clean and dust free and R134a Can Tap

SIMPLE BUT POWERFUL -XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use (Include R-134A automotive air conditioning dispensing valve design with hand operated punch/valve control, connects all R-134a refrigerant cans with 1/4" Male threads)HEAVY DUTY VACUUM PUMP - Die-cast Aluminum Alloy Casing enaDles the vacuum pump oe light and durable at the same time. Equipped with Brass fitting tethered safety caps to prevent oil leaks during transportation and handling.HVAC GAUGE READING - The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a and R410aEASY OIL CHANGE - The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned Deneath the oil reservoir to quickly drain when reeded. Checking the spillage meter will help to ensure the proper level of oil.